1 a05 slurry pump manual

Rubber Hi-seal Slurry Pump Parts Frame Plate Liner

Slurry Pump Rubber Hi-seal Frame Plate Liner

Slurry Pump Rubber Hi-seal Frame Plate Liners are made from natural rubber, suitable for delivering strong corrosive or abrasive slurries of small particle size without sharp edges.

Slurry Pump Rubber Hi-seal Frame Plate Liner is the main wear parts for the rubber lined slurry pump. It forms a pump chamber with cover plate liner and throat bush to contact with slurries, As one of main wetted parts, Frame plate liner very easily worn-out components because it works under longtime impact of abrasive and corrosive slurries in the high speed conditions, So the materials is very crucial to lifetime of complete pump, Tobee provides a complete rubber materials selection for most all duties in mill.

Related Slurry Pump Rubber Wear Parts:

Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.

Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.

Throat bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

HS1 Frame Plate Liner Codes:

AH Slurry PumpStandard Part CodeHS1 Part CodeRubber Material

1.5/1B-AH B1036 B1036 HS1 R08, R26, R33, R55, etc 2/1.5B-AH B15036 B15036 HS1 R08, R26, R33, R55, etc 3/2C-AH C2036 C2036 HS1 R08, R26, R33, R55, etc 4/3C-AH, 4/3D-AH D3036 D3036 HS1 R08, R26, R33, R55, etc 6/4D-AH, 6/4E-AH, 4E-AHF E4036 E4036 HS1 R08, R26, R33, R55, etc 8/6E-AH, 8/6F-AH, 8/6R-AH F6036 F6036 HS1 R08, R26, R33, R55, etc 10/8F-AH F8036 F8036 HS1 R08, R26, R33, R55, etc 10/8ST-AH G8036 G8036 HS1 R08, R26, R33, R55, etc 12/10F-AH FAM10036 FAM10036 HS1 R08, R26, R33, R55, etc 12/10ST-AH G10036 G10036 HS1 R08, R26, R33, R55, etc 14/12F-AH FAM12036 FAM12036 HS1 R08, R26, R33, R55, etc 14/12ST-AH G12043/R08, R26, R33, R55, etc 16/14TU-AH H14043/R08, R26, R33, R55, etc 20/18TU-AH U18043/R08, R26, R33, R55, etc

Applications of Rubber Slurry Pumps:

Tobee® Slurry Pump Rubber Parts are widely used for Mining, Mineral Processing, Sand and Gravel, Coal Prep, Chemical Slurry Service, Cyclone Feeds, Aggregate Processing, Wet Crushers, SAG Mill Discharge, Fine Primary Mill Grinding, Tailings, Secondary Grinding, Bottom/fly ash slurries, Pulp And Paper, Food Processing, Cracking Operations, Gypsum Slurries, Pipeline Transport, High Velocity Hydraulic Transport, Food Processing, Explosive Sludge In Metal Smelting, River And Pond Dredging, Heavy Refuse Removal, Larger Particle Or Low NPSHA Applications, Continuous (Snore) Sump Pump Operation, Abrasive Slurries, High Density Slurries, Large Particle Slurries, Sump Drainage, Wash Down, Floor Drainage, Mixing, Iron Ore, Cooper, Diamond, Aluminum oxide, Gold, Kaolin, Phosphorite, Steel, Palm, Sugar, Chemical, Power, FGD, Frac Sand Blending, Waste water, Flotation etc.