1 cutter suction dredge pump for sale

AlphaFlo® | Warman M & L Type Slurry Pump Aftermarket Spare Parts

AlphaFlo®

Centrifugal Slurry Pump Parts

AlphaFlo® aftermarket OEM Weir Warman L and M series centrifugal slurry pump spare parts

AlphaFlo® supply and for sale replacing Warman L and M type horizontal rubber & metal lining centrifugal slurry pump parts :

Wet end parts: Impeller,volute liner,throatbush,frame plate liner insert

Engineering parts: Cover Plate/Frame Plate,Base

Driving end: Cartridge style bearing assembly

Shaft seal parts: expeller, expeller ring,stuffing box,shaft sleeve,lantern ring/restrictor,gland,packing,

Seals&O Ring,V Rings: shaft sleeve o ring,expeller ring seal,stuffing box seal,volute cover seal,volute frame seal,discharge joint ring,intake joint ring.

Features:

• Casing. Two halves radially split casing with minimum casing bolts reducing maintenance and minimise downtime.
• Impeller & liner. Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and intermixability to reduce over all maintenance costs and maximize wear life.
• Bearing Assembly. removeable cartridge style grease luburicated bearing assembly can be replaced with the base.Also oil lubricated heavy duty bearing assemblies available.
• Shaft sealing
• centrifugal seal (dry-seal,elimination gland seal water),common gland seal and mechanical seal.

Declaration : All OEM Warman pump&Warman pump parts name,number and descriptions are for reference only.AlphaFlo's slurry pump parts interchangeable with OEM but AlphaFlo not affilicated with OEM.

Rubber & Elastomers

AlphaFlo produces a wide range natural rubber and synthetic elastomers for the majority of slurry pump wetted parts behave longer life and abrasion resistance in a variety of applications.

• Natrual Rubber (R08/R26/R33/R55)
• Neoprene (S42)
• Hypalon (S31)
• EPDM (S01)
• Nitrile (S10)
• Urethane (U01/U02/U03/U38)

High Chrome White Iron

AlphaFlo metal slurry pump wear parts can handle the toughest abrasive applications, and adhere to all relevant ASTM standards. Our most popular 27-30% high chrome metallurgy has a guaranteed 600+ Brinell hardness. Also variety of alternative metallurgies are available for other corrosive applications. (A05/A07/A33/A49/A51/A61)

Metal Wet End Parts

• Impeller - 147&052&056
• Volute Liner - 110
• Throatbush - 083
• FPL Insert - 041

Rubber Wet End Parts

• Impeller 147&127&145
• Frame Plate Liner - 036&043
• Cover Plate Liner - 017&018
• Throatbush- 083
• FPL Insert - 041

Mechanical End

• Base - 003
• Frame -032 & Cover Plate - 013
• Bearing assembly - 005

• HOW TO SELECT A WARMAN PUMP IMPELLER TYPE?
• 4, 5, & 6 Vane Enclosed Impellers:
• 4 Vane Enclosed Impeller – For coarser particle slurry handling (Basic Code. 145). 5 Vane Enclosed Impeller – Standard for heavy-duty slurry applications (Basic Code 147).6 Vane Enclosed Impeller – For higher efficiency slurry pumping (Basic Code 058)
• 4, 5, & 6 Vane Differential Impellers:
• For effective dry shaft sealing in high suction head slurry duties (HE1,HE2)
• 4, 5, & 6 Vane Semi Open Impellers:
• For larger particle clearances and wood tramp handling capabilities in slurries ( 051,052,053,056)
• WHAT DOES WARMAN® PUMP PART NUMBER SUFFIX CODE "TL1","HS1" AND "MS1" MEANS?
• "TL1" means "Thick Liner". often in a slurry pump wet end parts,such as the volute liner,frame plate liner insert,throatbush.The "TL1" parts could replace the standard parts directly without change other pump parts configuration.
• For example Warman AH pump 20/18 TU-AH.
• Volute Liner U18110TL1A05
• (Standard U18110A05)
• Throatbush U18083TL1MA05 ( Standard U18083MA05)
• Frame Plate Liner Insert-FPL Insert.U18041TL1MA05 (Standard U18041MA05)
• "HS1" means "HI-SEAL". It's a update of standard "Packing Gland" and "Centrifugal Seal" with less liquid leakage and lower pump consumption power. They are often in a slurry pump "Shaft Seal" parts and connected relation parts "Frame Plate " and "Frame Plate Liner Insert".
• For example Warman AH pump 8/6 E-AH
• Hi-Seal Centrifugal Seal.
• Expeller EAM028HS1A05 (Standard EAM028A05)
• Expeller Ring EAM029HS1A05 (STD.EAM029A05)
• Lantern Ring E063HS1C23 (STD.E063C23)
• F.P.L. Insert F6041HS1A05 (STD.F6041MA05)
• Frame Plate EAM6032PRD21 ( STD.EAM6032D210
• "MS1" means "Mechanical Seal", often in pump "frame plate liner insert" or "frame plate liner" for rubber liner pump.
• For example Warman AH pump 10/8F-AH
• Metal Lined Pump with Mechanical Seal
• F.P.L.Insert G8041MS1MA05 (STD.G8041MA05)
• Rubber Lined Pump with Mechanical Seal
• Frame Plate Liner G8036MS1MR55 (STD.G8036MR55)
• WHAT DOES WARMAN PUMP IMPELLER NUMBER "147" AND "145" MEANS?

Weir Minerals Warman Brand centrifugal slurry pump provide versatile impeller for each pump model, 145,147 and other as below.

• 051- 2 vanes open impeller
• 052 - 3 vanes open impeller
• 053 - 8 vanes open impeller
• 056 - 8 vanes open impeller
• 058 - 6 vanes closed impeller
• 145 - 4 vanes closed impeller
• 147 - 5 vanes closed impeller
• 137 - 3 vanes closed impeller
• 206 - 5 vanes double sided impeller
• 127 - 5 vanes open impeller
• WHAT IS OEM WARMAN PUMP "WRT" PART?

WRT means "Wear Reduction Technology" - a superior upgrade for existing Warman AH pump designed to enhance efficiency and improve wear performance.

• Increased wear life – the impeller throatbush combination will increase wear life between 30% and 50%
• Power savings – lower pump power
• Cost reduction – higher pump efficiency sustained over a longer pumping operation time
• Retrofit – new design parts retrofit to your current Warman pump
• Lower NPSH requirements – results in enhanced hydraulic performance and extended wear life
• Material combinations – rubber or metal part combinations available
• WHAT'S THE CONSIST OF OEM WARMAN® PUMP PART?

• Each Warman pump part has a unique name and a three-digit Basic Part Number.Parts with the same name have the same Basic Part Number, regardless of pump size.For example, the bearing assembly of every Warman pump has the Basic Part Number 005.
• Additional letters and numbers are added before and after the Basic Part Number to further define a component part of a particular pump,For example, Part Number E4110A05 identifies the impeller to fit the casing of the 6/4E-AH pump, E-4-110-A05 "E"means pump frame type. "4" menas pump discharge size 4 inch."110" is a basic part numer,"A05" is the part material.
• WHAT DOES WARMAN® PUMP WET END PARTS MEANS?

• Generally a Weir Warman slurry pump consist 30~40 units components and could be subdivided into the wet end,the mechanical end and the support end.
• The wet end clearly awared the slurry pass through parts,such as the impeller,volute liner,back liner and throatbush-the most wear parts of abrasion,corrosion and errosion.
• The mechanical portion of the pump includes the pump shaft, shaft sleeve, sealing arrangement, and the bearings assembly.
• The support end include the frame and casing plate.
• The wear parts include the wet end parts and some mechanical spares - shaft protection sleeve,shaft sleaing gland packing,lantern ring,lantern restrictor,expeller,expeller ring,stuffing box.
• WHAT IS WARMAN® PUMP PARTS MATERIAL OPTIONS?

• Weir Warman pump parts mainly made of metal or rubber.
• Metal of high chrome white iron abrasion & corrosion resistant (A05 & A07 & A33 & A49 & A51 & A61) for impeller & liner, stainless steel (C21 & C23 & C26 & C55 ) for shaft sleeve & lantern ring or wet end parts,engineering steel (E02 & E62 & E05 & E65) for shaft and fasten bolts & nuts.
• Rubber of abrasion resistance natrual rubber R55 for impeller & wear liner,synthetic elastomers-Neoprene (S42) & Hypalon (S31) & EPDM (S01) & Nitrile (S10) & Polyurethane (U01 & U38 ) for impeller & liner & O ring & joint seals.
• Combinated material: J04 & J05 & J21 & J31 ceramic & chrome & tungsten carbide coated steel.
• WHAT PUMP SPARE PARTS SHOULD I PURCHASE FROM ALPHAFLO® FOR STOCK?

• As above talked,slurry pump wet end parts and some shaft sealing parts is the wear parts which need replace in regular time.
• Managing and reducing the slurry pump wear is what AlphaFlo® does for our customers
• AlphaFlo® stock bulk regular slurry pump models wet ent parts for the shortest lead time to our customers.
• ARE ALPHAFLO® SLURRY PUMP PART 100% INTERCHANGEABLE WITH MY GENUINE WEIR WARMAN PUMP?

The Weir Minerals Group Warman® brand AH slurry pumps with 60 years history are the world standard for heavy duty slurry pumping solutoins. AlphaFlo® horizontal and vertical slurry pump parts have been rigorously reverse engineered using 2D 3D modeling. First article inspection involves comparison to OEM parts followed by fit and material testing. All impellers have been performance tested to certify them against OEM Warman pump performance and equal service time.

• IS THERE A HIGH QUALITY WARMAN PUMP PARTS REPLACEMENT SUPPLIER FROM CHINA?

That's AlphaFlo.

AlphaFlo® manufactures top quality metal and elastomer replacement parts fully compatible with Warman pumps, and provides value to customers through fair pricing and lead times that are some of the lowest in the market. We stock bulk slurry parts and maintain a global distribution network that stands ready to serve your process needs.

Reliable OEM aftermarket slurry pump parts from AlphaFlo®, please don't hesitate to inquiry us.