5 lithium slurry pumps

Arctic Hydronic High Temperature Heat Pump - 48,000 BTU with Cold Climate Inverter Technology

High Outlet Water Temperature

Using a two-stage compression cycle, the Arctic Extreme High Temperature Heat Pump can deliver usable water temperatures as high as 85C or 185 F. This high temperature Heat Pump can be used where most other heat pumps can’t deliver, such as direct boiler replacement or for high temperature domestic hot water. The Arctic Extreme can operate in temperatures as low as -30C/ -22 F while still producing energy savings that exceed traditional electric boilers.

How It Works

The operating temperatures of Heat Pumps are limited to the type of freon used. R410a and R32 can boil (evaporate) at temperatures as low as -45C (-49F). This low boil point allows them to extract heat from very cold air temperatures. However, these freons are limited on the hot side to around 55C (132F). Other Freons can operate at a much high temperature but fail to operate in cold temperatures. Introducing the Arctic Extreme, North America’s only high temperature EVI heat pump! By using two compression cycles, each with a different Freon, we are able to boost the operating temperatures as high as 85C (185F) while still being able to operate at very cold temperatures.

Step 1 - Used our standard EVI Heat Pump to Extract the energy from cold air.

Step 2 - Instead of transferring the energy to the Hydronic Loop, the Energy is transferred through a Heat Exchanger to second refrigeration loop.

Step 3 - Uses R-134a to raise the refrigerant temperature as high as 85C (185F).

Features

EVI DC inverter technology rated to -22 F (-30 C)

High outlet water temperature of 185F (85C)

UL/CSA Certified

Epoxy Coated Aluminum Finned Evaporator

Specifications – 030ZA/BEH2

Arctic DC Inverter Two Stage High Temperature Heat Pump

ModelMAHRW030ZA/(BEH2)Power SupplyV/PH/Hz220/1/60AverageHeating Capacity kW 2.9~14.0COP Range W/W 1.5~16.0Ambient 7C

Water outlet 75CHeating Capacity kW 12.4Power Input kW 5.1Current Input A 23.2Ambient -12C

Water outlet 75CHeating Capacity kW 9.2Power Input kW 4.7Current Input A 21.1Maximum power inputkW 6.5Maximum current inputA 29.4Maximum water outlet temperature?85°F 185Rated water flow volumem³/h 2.12GPM 9.33Rated water pressure dropkPa 40Water connections (external threaded)inch 1"RefrigerantR410A+R134ASound leveldB(A)53Waterproof levelIPX4Electric shock protecting gradeIUnit dimensions (L/W/H)mm 824/580/1360Inch 32.4/22.8/53.5

Testing conditions:

Heating: outdoor temperature DB/WB: 7/6°C, outlet water temperature: 75°C.

Heating: outdoor temperature DB/WB: -12/-14°C, outlet water temperature: 75°C

The power/current input does not include water pump power/current input.

In case of any changes caused by product improvements, the nameplate shall prevail.

No one knows air to water heat pumps like we do!

Have questions about our energy-efficient heating solutions? We're here to help! Whether you need product details, installation support, or assistance with an order, our team is ready to assist you.

Get in touch, no matter where you’re at in your project plans. We’d be so happy to help!