a49 slurry pump replacement

Honda WT30 | 3" Trash Pump

WT30XK4A

3" trash pump

317 gal./min capacity

Solid handling capability up to 1 1/16"

Cast iron volute and impeller

Quick clean out port

Features

Heavy-duty 3" construction trash pump Specially designed for job sites and applications where high volume trash water capacity is needed.

Easy starting Honda OHV commercial engine The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.

317 gal./min capacity

Solid handling capability up to 1 1/16" The specially designed impeller allows solids to pass through easily, without clogging.

Heavy duty full frame protection Protects the pump, while offering a convenient tie down location for transport.

Easy quick clean out port The WT30 is designed for quick and easy service. An easy access service port makes clean-out quick.

Replaceable stainless steel wear plate The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs

Standard service tool A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.

Durable silicon carbide mechanical seal Features abrasion-resistant silicone-carbide seals for extended wear.

Cast iron volute and impeller The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.

Isolation mounted engine and pump High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.

Unique conical shaped impeller The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.

Protected by Honda Oil Alert® Protects the pump by shutting the engine off when low oil is detected.

Large heavy duty metal strainer The strainer allows up to 1 1/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.

Specifications

Engine GX270

Displacement 270 cc

Bore and stroke 3.0" x 2.3"

Compression Ratio 8.5:1

Oil Alert Std

Pump Type Trash Centrifugal Self-priming

Volute Rigid Mounted Cast Iron w/ Stainless Wear Plate

Impeller Conical Cast Iron

Mechanical Seal (Pump case / impeller) Silicon Carbide/Silicon Carbide

Priming time 90 sec. @ 16.4 ft.

Drive system Direct

Discharge capacity 317 gal/min

Suction port diameter 3"

Discharge port diameter 3"

Total head lift 82 ft.

Suction head lift 26 ft.

Maximum pressure 36 psi

Solids handling 1 1/16 inches

Dimensions (LxWxH) 26.0" x 19.5" x 20.3"

Dry weight 134 lb.

Fuel Capacity 1.4 gal

Run Time @ Max Discharge 1.5 hr

Strainer Part # 78325-YG1-003

Residential Warranty 24 months

Commercial Warranty 12 months

Accessories

A wide variety of hose kits, couplers, adaptors, and other accessories are available.