EUR
en
The outlet direction of centrifugal slurry pump can rotate and install the pump body, pump cover and flow passage parts according to 8 angles: this series of pumps are horizontal, vertical and double shell slurry pumps. The pump body and centrifugal slurry pump cover are equipped with replaceable metal lining, which is made of high chromium wear-resistant alloy material. The lining can be used until worn through, so as to extend the maintenance cycle and reduce the operation cost. The outlet direction of the pump can be rotated and installed at 8 angles.
During the operation of centrifugal slurry pump, attention should be paid to the temperature and leakage of packing gland. Normal packing leakage should not exceed 10-20 drops per minute. During the operation of the pump, if the ah slurry pump can inhale solid air, it will make an abnormal sound and vibrate. During the installation and operation of 10 / 8e-hh pump, the outlet direction can be rotated by 8 angles. If the check valve of the standby unit leaks and the switch valve is always open, it is necessary to pay attention to reverse the standby unit due to reverse flow. When the pump regulates the flow in normal operation, it can't reduce the flow by reducing the opening of the suction pipe valve, otherwise it will cause the pump entrance flow to be insufficient and make the pump cavitation. In the operation of the pump, for the bearing that needs cooling water, pay attention to the water temperature and water quantity, and try to keep the bearing temperature within the specified range
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.