EUR
en
Specifically designed from its inception for mill circuit applications, the Metso MD series of mill discharge MDM hard metal and MDR rubber lined slurry pumps offer sustained performance with maximum time between mill shutdowns. Hydraulic design is consistent across the entire range and by limiting the inlet velocity at design BEP impact damage from coarse heavy solids is kept to an absolute minimum. Large diameter high aspect ratio impellers provide for excellent hydraulic efficiency with minimum turbulence at minimum rotational speed, thereby reducing the rate of wear. Reduced impeller overhang restricts shaft deflection across a wide range of flows, and in so doing maximizes shaft seal and radial bearing life. Suction side recirculation is restricted by an adjustable inlet liner / wear plate. When used in conjunction with the axially adjustable bearing cartridge, the design provides for ‘double adjustment’ ensuring that both suction side and gland side impeller clearances can be set and reset at a minimum.
Pass solids from 1-12 inches (rocks, rags, debris). The EDDY Pump’s open rotor design with high tolerances allow anything that will go into the intake to be passed through the discharge without issues.
Tolerance between the rotor and the volute in the 4″ EDDY Pump easily allows the passage of a man’s arm (*see picture below). Compared with the tolerance in a centrifugal pump, the EDDY Pump easily wins. Pump Range spans 1-inch through 12-inch EDDY Pump line, the tolerance ranges from 1-12 inches.
This translates to a significant amount of solids and debris pass through, without clogging the pump. To learn more about the technology behind our pumps continue reading Here.
Metso Outotec was created through the combination of Metso Minerals and Outotec on June 30, 2020. They are a frontrunner in sustainable technologies, end-to-end solutions, and services for the minerals processing, aggregates, and metals refining industries globally.
Metso Outotec offers a comprehensive product line of horizontal slurry pumps to serve a wide range of slurry transport applications. The total solution of pumps, parts, and services to tackle even the most abrasive applications and help you to reduce operating costs.
Horizontal Slurry Pumps Include:
Vertical slurry pumps are highly configurable pumping equipment designed to reduce maintenance and operating costs. They require less floor space than horizontal pumps, and wear parts are available in hard metal or rubber.
Vertical Slurry Pumps include:
Vertical froth pumps increase the efficiency of pumping frothy slurries. They are ideal for all applications involving the handling of air-entrained slurries. Used as a mixing and distribution unit, where the dry powder has to be mixed (and wetted) with water, vertical froth pumps can also be used with cement in ready-mixed concrete and grouting.
Metso Outotec range of vertical tank pumps is called Sala VT vertical tank pumps. They are available as either rubber-lined or hard metal-lined versions.
Vertical tank pumps are made for abrasive slurries. Known for robust construction and durability, vertical tank pumps are designed to be simple to maintain and easy to install.
High-level wet classification in mining is necessary for efficient size control of particles finer than 1 mm in water. There are different methods of wet classification, but when the particles size range is 100-10 microns, hydrocyclones are the optimal choice. MHC™ Series hydrocyclones provide maximum process performance and uptime during wet classification. These hydroclones have a smooth flow of material, coming from an innovative inlet head design. The Robust manifold design provides ease of maintenance and superior wear life—exceptional separation efficiency through a Patent-pending design bringing the next generation of hydrocyclone technology in wet classification. MHC Series Hydrocyclones offer a Diverse range of applications and broad product line offerings.
Slurry handling is vital in maximizing minerals processing plant’s productivity and efficiency. It plays a crucial role in mining processes involving water and other liquids. Reduce maintenance costs with one annual maintenance break instead of three, which means up to 67% spare-parts cost savings. These newer pumps require 75% less maintenance- meaning less water usage and saving over 6 billion liters of water. With a 7% increase in pump efficiency reduced energy consumption by 15%. Natural rubber-lined pipes have five times longer wear compared to typical polyethylene pipes saves you in service cost.
Slurry Handling equipment includes:
Metso Outotec Slurry Knife Gate Valves are used for isolation purposes in the mill circuit; they are also found in mining operations’ separation and refinery stages. Metso Outotec provides several types of valve solutions that can be tailor-made to the specific application.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.