centrifugal pump questions and answers pdf free download

Zoeller 161-0052 Model D161 High Head Effluent Pump 0.5 HP 230V 1PH 50

Zoeller Model D161 High Head Effluent Pump Description

The Flow-Mate series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance!

Zoeller Model D161 High Head Effluent Pump Features and Benefits

Durable Cast Iron Constructed Switch Case, Base, Motor and Pump Housing

Impeller, Bronze Class 85-5-5-5

Corrosion-Resistant, Powder Coated Epoxy Finish

Oil Filled, Hermetically Sealed, Automatic Reset Thermal Overload Protected Motor

Maximum Temperature for Effluent or Dewatering 130°F (54°C) (E/D 140°F,60°C)

Stainless Steel Screws, Bolts, Float Rod, Handle, Guard, Arm and Seal Assembly

Passes 3/4" (19 mm) Spherical Solids

1-½” NPT Discharge Standard, Optional2” NPT FLANGE KIT or 3” NPT FLANGE KIT Available

Automatic Units Available with Float-Operated, Submersible, 2 Pole Mechanical Switch

Zoeller 161-0052 High Head Effluent Pump Specifications

VOLTAGE: 1ø, 230V, 60Hz

HORSEPOWER: 0.5 HP

AMP DRAW (full load): 7.5

MOTOR TYPE: Permanent Split Capacitor (PSC)

RPM: 3450 RPM

MAXIMUM HEAD: 57'

MAXIMUM CAPACITY: 100 GPM

SWITCH TYPE: Automatic

SWITCH 'ON' LEVEL: 15-3/4"

SWITCH 'OFF' LEVEL: 5-1/4"

DISCHARGE PIPE SIZE: 1-1/2" NPT Vertical Discharge

MAXIMUM SOLIDS HANDLING: 3/4" Spherical Solid

IMPELLER TYPE: Bronze, Non-Clogging Vortex

CORD LENGTH: 50' Type UL Listed, 3-Wire Neoprene Cord and Plug

BODY CONSTRUCTION: Cast Iron

MAXIMUM OPERATING TEMPERATURE: 130°F (54C)

Zoeller Limited Warranty

Zoeller products often carry warranty terms that vary in length based on the product type. Refer to the installation manual for specific warranty term.

Manufacturer warrants, to the purchaser and subsequent owner during the warranty period, every new product to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of three years from the date of purchase. Proof of purchase is required. Parts that fail within the warranty period, that inspections determine to be defective in material or workmanship, will be repaired, replaced or remanufactured at Manufacturer's option, provided however, that by so doing we will not be obligated to replace an entire assembly, the entire mechanism or the complete unit. No allowance will be made for shipping charges, damages, labor or other charges that may occur due to product failure, repair or replacement.

This warranty does not apply to and there shall be no warranty for any material or product that has been disassembled without prior approval of Manufacturer, subjected to misuse, misapplication, neglect, alteration, accident or act of nature; that has not been installed, operated or maintained in accordance with Manufacturer's installation instructions; that has been exposed to outside substances including but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or other person to assume for us any other liability in connection with our products.

Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211, Attention: Customer Service Department to obtain any needed repair or replacement of part(s) or additional information pertaining to our warranty.

MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY.

Some states do not allow limitations on the duration of an implied warranty, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.