clay dredge pump years made

OZITO PSDW-780 INSTRUCTION MANUAL Pdf Download

Table of Contents

Know Your Product

SETUP & PREPARATION SUBMERSIBLE PUMP 1. UNIVERSAL ADAPTOR 1. Float Switch Cable 5 Suction Base Ensure the pump is disconnected from the power supply 2. Float Switch Adjustor 6 Outlet before performing any of the following operations. 3.

Operation

OPERATION 2. L-SHAPE CONNECTOR 3. FLOAT SWITCH T he pump is fitted with a float switch, which controls how 1. Screw the L-shape connector into the pump the pump switches on and switches off. housing by rotating in a clockwise direction Automatic mode When the pump is plugged into an outlet and left unattended it will turn on when the float switch turns on.

PUMPING WATER IN A HOME DOMESTIC CAUTION: YOUR PUMP HAS THE CAPACITY TO PUMP DIRTY WATER WITH A NON SOLID APPLICATION. DO NOT USE IT FOR CORROSIVE, PARTICLE SIZE OF UP TO 35MM IN DIAMETER. ABRASIVE, EXPLOSIVE OR DANGEROUS LIQUIDS. PSDW-780

Installation

Pump will not turn off, even The float switch is stuck in the “on” position Ensure that the float switch is free to operate normally. Contact Ozito customer service if the though the water level is low problem still occurs.

Additional Safety Instructions For Pumps

Replace the extension lead if damaged or defective. Then Note: The supply of 230V and 240V on Ozito pumps are interchangeable for Australia and New Zealand. This using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for pump is earthed in accordance with AS/NZS 60335-2-41.