gravel slurry pump manual

BJM Pumps® Archives

A Series

Submersible Electric Pumps with Open Channel Impeller. Ideal for pumping and draining clear liquids & sewage. Available in 60Hz, 3-phase, 460V options. 2-pole or 4-pole options available.

Alpha V Series

Submersible Electric Pumps with Vortex Impeller. Solids Handling ideal for pumping residential sewage. 60Hz 1ph and 3ph options available.

BIC Series

Submersible Electric Pumps with Two Vane Impeller. Ideal for clear water or light sewage. 60Hz 1ph and 3ph options available.

G2 Series

Main components fabricated in cast iron GG25. Available in 60Hz, 460 V options. Built-in macerator in the inlet to break down solids. Seal Minder® Probe standard on all models.

GRIX Series

Electric Grinder Pumps with Cutting System. Ideal for domestic sewage, liquids with suspended solids, or when high pressure is needed. 60Hz 1ph and 3ph options available.

H2 Series

Main components fabricated in cast iron GG25. Available in 60Hz, 460 V options. Double channel impellers.

V Series

Main components fabricated in cast iron GG25. Available in 60Hz, 2-pole or 4-pole, 460 V options. Vortex impellers.

KZN Series

Abrasion-resistant solids-handling pump. Heavy duty, high-chrome agitator for sand/ sludge/ slurry applications. Double silicon carbide mechanical seals.

SKF Series

Fahrenheit® HIGH TEMPERATURE, solids-handling, non-clog pump. Solids handling <3.5”. 304 stainless steel.

JXH Series

CORROSION-RESISTANT, high head (140’) dewatering pump. Cast 316 stainless steel, no welds. Solids capability <3/8”.

BABY Series

12V battery-operated general dewatering pump. 1500 GPH / 25 GPM. Corrosion-resistant motor housing. Saltwater compatible.

HAZ Series

Abrasion-resistant, heavy-duty solids-handling pump. Designed, constructed for abrasive coal slurries. High chrome semi-open impeller and wear plate.

J Series

Cast iron effluent general sump dewatering pump. High flow <650 GPM. Solids capability up to 3/8”. 304 stainless steel motor housing.

JH Series

HIGH HEAD (<140’) general sump dewatering pump. Cast iron construction. Solids capability up to 3/8”.

JHF Series

Fahrenheit® HIGH TEMPERATURE, high head, dewatering pump. Temperatures up to 200°F (93°C). High head up to 140’.

JX Series

CORROSION RESISTANT, high flow (<650GPM) dewatering pump. Cast 316 stainless steel. Solids handling <3/8”.

JXF Series

Fahrenheit® HIGH TEMPERATURE, corrosion-resistant, dewatering pump. Cast 316 stainless steel. High temperature up to 200°F (93°C).

JXHF Series

Fahrenheit® HIGH TEMPERATURE, CORROSION-RESISTANT, high head (140’) dewatering pump. Cast 316 stainless steel, no welds. Temperatures up to 200°F (93°C).

KB Series

Heavy duty hard metal wastewater drainage pump with agitator. Wastewater removal in sand/slurry/sludge applications. Hard metal components.

KBF Series

Fahrenheit® HIGH TEMPERATURE wastewater slurry pump. Abrasive resistant chrome iron components. Narrow (<13.5” diameter).

KHD/KHH Series

HIGH FLOW (<1000 GMP), or HIGH HEAD (<400') abrasion-resistant, dewatering pump. High chrome iron impeller. Ductile iron wear plate and pump volute, hard metal components.

KZE Series

High capacity, hard metal slurry pump with agitator. High chrome iron agitator and iron ware parts. Semi-open impeller (<1” solids).

KZN-HYD Series

HYDRAULIC abrasion resistant, solids handling hard metal slurry pump. Hydraulic requirements: 8.2GPM – 25GPM. Semi-open impeller handles high concentration of abrasive solids.

KZNF Series

Fahrenheit® HIGH TEMPERATURE. Heavy duty, abrasion-resistant solids-handling pump. Heavy duty high-chrome agitator for sand/ sludge/ slurry applications.

KZNR Series

SEVERE abrasion-resistant solids-handling pump. Hardened ductile iron volute – 2x abrasion resistance. Semi-open impeller handles high concentration of abrasive solids.

KZNRF Series

Fahrenheit® HIGH TEMPERATURE, abrasion-resistant, solids-handling. Hard metal, agitator slurry pump. 2x abrasion resistance of standard ductile iron.

LWA Series

Lightweight hard metal agitator dewatering pump. Designed for dewatering sand, silt, coal fines and abrasive light slurries. Max solids:0.4” (sand, silt, coal fines and abrasive light slurries).

R Series

Small, low HP range dewatering pump. Robust cast iron construction. Top discharge, slim line design.

RX Series

Portable, corrosion-resistant dewatering pump. Cast 316 stainless steel (ASTM 48), no welds. Motor cooling feature for low level liquid applications.

SF Series

Fahrenheit® HIGH TEMPERATURE. Solids-handling wastewater pump. 304 stainless steel motor housing.

SK Series

Solids-handling non-clog pump. Shredding/cutting solids up to 3.5”. Cast iron and 304 stainless steel.

SKG Series

Patented dual-shredding RAD-AX® (cut/ /shear) technology solids handling pump. Prevents clogs <10% solids (by volume). Hardened 440C stainless steel cutting elements.

SKGF Series

Fahrenheit® HIGH TEMPERATURE, shredding, solids handling pump. Radial + Axial patented RAD-AX® shredding technology designed to cut, shred, shear. Prevents clog in wastewater (<10% solids by volume).

SKX Series

CORROSION-RESISTANT 316 Stainless steel shredding/cutting solids handling pump. Designed to tear, break, rip solids. Max solids <3.5”.

SKXF Series

Fahrenheit® HIGH TEMPERATURE, corrosion-resistant, non-clog, shredding/cutting pump. Wear-resistant shredding/ cutting system designed to tear, break, rip solids. Max solids 3.5”.

SV Series

Non-clog, solids handling pump with vortex impeller. Non-clog design for sewage, viscous liquids, rags, effluent water.

SVF Series

Fahrenheit® High Temperature, Solids Handling, recessed vortex impeller. Vortex impeller. Abrasion resistance w/ hardened ductile iron.

SX Series

CORROSION-RESISTANT solids-handling non-clog pump. 316 stainless steel (ASTM 48). Max solids 2.5”.

SXF Series

Fahrenheit® HIGH TEMPERATURE, corrosion-resistant, solids-handling non-clog pump. High temps up to 200°F (93°C). Non-clog impellers, max solids 2.5”.

XP-JX Series

EXPLOSION PROOF JX series. Corrosion-resistant, dewatering pump. Cast 316 stainless steel (ASTM 48) wet end, no welds.

XP-JXH Series

EXPLOSION PROOF JHX series. Corrosion-resistant, high head (<112’) dewatering pump. Cast 316 stainless steel (ASTM 48) wet end, no welds.

XP-KZN Series

EXPLOSION-PROOF KZN series. Abrasion-resistant solids-handling pump. Heavy duty high-chrome agitator (28%) for sand/ sludge/ slurry applications.

XP-SKG Series

EXPLOSION-PROOF SKG series. Patented Dual-shredding RAD-AX® (Radial + Axial) technology dewatering pump. Prevents clogs in wastewater 10% solids.

XP-SKX Series

EXPLOSION-PROOF SKX series. Corrosion-resistant, 316 stainless steel. Shredding/cutting - solids handling <3.5”.