heat pump water heaters

Submersible "Non-Clog" Pump

Submersible Sewage "Non-Clog" Pump

Heavy duty sewage ejector pump with Inboard oil filled shaft seal. Uses include residential / commercial sewage, loading docks and other pits where a non-clog submersible wastewater pump is needed with high flow. 4" Horizontal Discharge Solids Handling Pump 4" horizontal discharge handles up to 3" spherical solids. Motor sizes from 4 to 15HP Open and enclosed impellers, some with pump-out vanes on backside. Delta impellers available on some models Volutes available in both standard-efficiency concentric and high-efficiency scroll designs Capacities to 1265 gpm Heads to 258 ft. Replace Berkeley SW601200325MB

• DISCHARGE 4" 125LB ANSI Flange.
• LIQUID TEMPERATURE 104ï½° F (40ï½° C) continuous.
• VOLUTE Cast iron ASTM A-48 class 30.
• MOTOR HOUSING Cast iron ASTM A-48 class 30.
• SEAL PLATE Cast iron ASTM A-48 class 30.
• IMPELLER Design: open, double vane.
• IMPELLER Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3.
• SHAFT 416 series stainless steel.
• O-RINGS Square shaped Buna-N.
• PAINT Air dry enamel, water based.
• SEAL Design:Double, mechanical, oil filled chamber.
• SEAL Material : Silicon carbide outboard, with stainless steel hardware.
• HARDWARE 300 series stainless steel.
• CORD ENTRY 25 ft of neoprene cord SJTOW 10/4, sealed against moisture.
• MOISTURE SENSOR Normally open included.
• TEMPERATURE SENSOR Normally closed included.
• BEARINGS Upper: ball, single row, oil lubricated, for radial load. Lower: ball, single row, oil lubricated, for radial and thrust load.
• MOTOR NEMA B, 60 Hz, 1750 RPM, oil filled, with overload protection in motor.
• PUMP OPERATION Manual, does not include level control. See Options
• OPTIONAL EQUIPMENT Additional cord and slide rail coupling (SRC-2).

More Information

Model Number 4BSE1133DS part number 62170127 Series Barmesa Industrial Pumps Max Flow (GPM.) 700 Max Flow GPH 42000 TDH Maximum (Ft) 90 TDH Maximum (PSI) 39 Horse Power (HP) 11 Horsepower (IE .5, 1, 1.5, 20) 11.0000 Outlet Connection Type Flange Outlet (In.) 4 Wetted Materials Cast Iron Elastomers / O-ring Buna-Nitrile Voltage (V) 208-230 Voltage (Range) 208-240 Phase (Ø) Three (3) Motor Frequency 60 Motor Amps (A) 28 Motor Hermetically Sealed Speed (RPM.) 1725 Max Operating Temperature (F) 104 Viscosity SAE 10 oil 88.00 cp 500.00 ssu Mechanical Seal OIL FILLED Mechanical Seal Face SiC Mechanical Seal Type Double Impeller Size (IN.) 9.000000 Other The moisture cord and /or temperature cord is size 18/5, type SO, 0.485"dia. Keep flow rate below 680gpm or 40FT to avoid motor overload. Refer to performance curve. Approvals CSA Impeller Material open, double vane. cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3. Motor Locked Rotor Amps (A.) 160.000000 Cord Size 10/4 Cord Length (Ft.) 25 Country of Manufacture Mexico Weight (Lbs) 421.000000 Warranty (YRS.) 1 GPM Of Water At 15 Feet Of Head 70 GPM Of Water At 50 Feet Of Head 540 GPM Of Water At 60 Feet Of Head 400

Barmesa Pumps LLC

started operations in 1953, manufacturing small self-primer pumps, jet pumps and end suction centrifugal pumps for the rural market. During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps. Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications. Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".