EUR
en
Our Power Boost technology, a hybrid technology consisting of vacuum and centrifugal pump, considerably increases efficiency. The unbeatable advantage: You can quickly and completely fill your slurry tanker, thus preventing long parking times. At the same time, an agitating function prevents solid materials from sinking and clogging.
Single-axle to four-axle slurry tankers Tank sizes of 6 m³ to 32 m³ Steel tanks from German quality production
The Power Boost technology from garant Kotte is a combination of a vacuum pump and a centrifugal pump system. The tank is filled and emptied by means of a centrifugal pump powered by a p.t.o. shaft. The vacuum compressor is driven hydraulically. In contrast to the usual vacuum tank truck, the compressor on this model only serves to suck up the slurry up to the centrifugal pump.
Whether top or bottom hitching, with or without drawbar suspension – we have the right hitch for every tractor and every system. To make your work even more efficient, we adapt the hitch of your slurry tanker individually to the existing tractor and to the permissible drawbar load.
for flange towing eye or K80 ball suitable for slurry tankers without or with light spreading technology
for K80 ball high driving comfort and ease of towing higher drawbar loads can be achieved
for K80 ball Highest driving comfort Adjustable to different coupling heights Slope of the slurry tanker adjustable
Individuality is important to us right from the start. For this reason, we customise all containers to the respective chassis and the desired tyre size. Our containers are manufactured in a special low-profile design and thus offer you optimum driving comfort – both on the road and in the field. Every garant container offers reliable corrosion protection. You can choose between galvanising or a special internal coating in combination with a coloured exterior paint.
Tyre type, tread and size must be perfectly adapted to the usage. We have the right tyre for all operating conditions and any type of soil available. We exclusively rely on renowned manufacturers such as Vredestein or Trelleborg.
Radial and cross-ply tyres Diameter from 22.5 to 42 inch Widths between 385 and 1050 mm
In order to ensure a high degree of reliability, we exclusively use original BPW axle assemblies. All BPW chassis are individually adapted to your vehicle to guarantee optimum driving safety. In doing so, we take the gross vehicle weight rating, the tyres and the application into consideration.
Square axle up to 150 mm x 150 mm Brake drum up to 410 x 180 mm TÜV certification up to 60 km/h Prepared for tyre pressure control systems
Directly driven centrifugal pumps are powerful and particularly durable. Compressors do not come into contact with the slurry during filling and emptying, therefore there is only little wear. Furthermore, service work can be carried out easily and cost-effectively.
NW 250 Installed at the front under the tank Direct drive via PTO shaft
Hydraulically driven (via tractor hydraulics) Air output 15,500 litres per minute Automatic lubrication with injector cooling
Steering axles improve manoeuvrability and track accuracy, which considerably reduces tyre wear and the load exerted on the entire chassis. Furthermore, you save fuel by means of a steering axle due to the fact that the slurry tanker is significantly easier to pull. Less friction additionally protects the ground and the sward.
Straightforward and robust system Large steering angle possible
ElectronicSteeringSystem (ESS 2.0) Simple connection, as no steering linkage is required Manual steering possible via control unit
MultiSteeringSystem (MSS) All axles are steerable Adjustable steering strategies, e.g. also travelling in crab-steering mode
The discharge quantity can be controlled by means of a bypass independently of the pump rpm. For this purpose, a part of the slurry flowing through is returned to the tank. The setting is carried out by means of a hand lever or a slide with spindle motor. In combination with an active flow rate sensor, a bypass also enables automatic quantity control.
An inductive flow rate sensor continuously determines the quantity of discharged slurry within a measuring range between 0.5 and 12 cubic metres per minute. The current quantity (m³/ha) is calculated on the basis of the recorded travelling speed in combination with the saved operating width of the application technology. You can read off the current value from a digital display at any time. The discharge quantity can also be actively controlled on request.
Our durable and robust garant three-point/four-point lifting gears are the basis for your work success.
Vor allem auf leichten Böden erhöhen Nitrifikationshemmer die Effizienz von Flüssigmist. Denn durch ihren Einsatz verhindern Sie, dass der für die Pflanzen unmittelbar verfügbare Ammoniumstickstoff ausgewaschen wird. Eine Dosieranlage für Nitrifikationshemmer bietet zahlreiche Vorteile. Dank des Vorratstanks müssen Sie nicht ständig nachtanken. Zudem können Sie die Soll-Menge pro Hektar exakt dosieren – und zwar weitgehend automatisch.
Our two-chamber system helps you to optimise the tongue load of the tractor, particularly on slopes. The principle is simple and smart: The interior of the slurry tanker is divided into two chambers. Due to closing the first chamber, there is more slurry in the front chamber than in the rear one during discharge. This means that the tractor still has sufficient tongue load, particularly when travelling uphill.
Lower the tyre pressure on the field, increase the ground contact area and thus reduce the pressure exerted on the ground. On the other hand, use a higher tyre pressure on the road to reduce the rolling resistance, thus achieving a considerable decrease of the diesel consumption. Moreover, tyre wear is also reduced.
German quality manufacturer PTG One- and two-wire systems Integrated and separate control terminal solutions From 1.5 to 3.5 bar in up to two and a half minutes
Our garant suction spout solutions help you to easily, quickly and safely fill your professional slurry tanker. Thus, you stay clean and work comfortably and efficiently at the same time.
A pivot joint Docking height approx. 1.30 metres NW 200 or NW 250
Modular / Flangeable design Single-steered version with or without filling aid Double-steered version with short or long transfer range Double-steered version with suction hose for pit extraction NW 200
Can be swivelled up to 270° Telescoping Automatic parking position NW 200
The use of a cutting filter prevents the suction of foreign objects and solid materials into the tank, such that the risk of clogging in the distribution head of the application technology is reduced. A cutting filter chops the foreign objects by means of a star-shaped rotor knife installed at the cutting comb and excels by its straightforward design, easy cleaning and low maintenance requirement.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.