i water pump

Slurry Pump 4 Vanes Impeller G10145-A05A

Tobee® Slurry Pump 4VCG Impeller G10145-A05A

Tobee® Slurry Pump 4VCG Impeller G10145-A05A is closed type with 4 vanes for 12X10ST-AH Centrifugal Slurry Pumps. Its design incorporates a unique vane let on the back shroud which streamlines the flow through the impeller.

Impeller Wear Parts Code List:

AH Slurry Pump 4VCG Impeller Code Standard impeller Code 3x2C-AH C2145-A05 C2147A05 4x3C-AH,4x3D-AH D3145-A05 D3147A05 6x4D-AH,6x4E-AH E4145-A05 E4147A05 8x6E-AH F6145-A05 FAM6147A05 10x8F-AH FAM8145-A05 FAM8147A05 10x8ST-AH G8145-A05 G8147A05 12x10ST-AH G10145-A05 G10147A05 14x12ST-AH G12145-A05 G12147A05 16x14TU-AH GAM14145-A05 GAM14147A05 16x14H-AH H14145-A05 H14147A05

Tobee® Spare Parts Wear Reduction Technology:

Increased wear life – the impeller and throat bush combination will increase wear life between 30% and 50% Power savings – lower pump power consumption Cost reduction – higher pump efficiency sustained over a longer pumping operation time Retrofit – new design parts retrofit to your current AH slurry pumps Lower NPSH requirements – results in enhanced hydraulic performance and extended wear life Material combinations – rubber or metal part combinations available

Impeller design:

The five vane impellers in the AH pump range were for many years considered to be the industry ‘standard’. However, in order to improve upon one or more of the performance parameters, Tobee started out by using a range of four vane impellers developed for the AH pumps. The upgrade impeller designs maintain the four vane’s advantages, but improved on all of the performance parameters - efficiency, wear and cavitation performance by improving the fluid guidance through the impeller with streamlined main pumping vanes, streamlined inlet as well as vane lets at the impeller outlet. Due to these improvements in performance, the impellers represent a step change improvement compared to the older style five vane impeller design.

Slurry Pump Spare Parts Impeller Applications:

The Impeller is used for highly abrasive/density slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage and tailing in minerals plants plus other industrial applications, Sometimes, it could also be used in dredging of settling lagoons and pumping of drilling mud etc.