k subsea dredge pump manual

Zoeller 105-0001 105 Drain Pump

Product details

Removes water from areas where gravity flow is not available.

Applications include laundry tray pump, wet bar sink, lavatory, air conditioning condensate and dehumidifier water removal. Can also be used in conjunction with dishwashers and garbage disposal applications. No inlet filters or screens to clean Optional top or side inlet Can be installed with internal trap Automatic pumps with tank cord seals All hardware for easy assembly Polypropylene basin and lid Internal discharge pipe to lid (trap supplied by others) Check valve (30-0181, not included with model 104) Contact factory for additional inlet option or high head applications Easy installation, no need to dig a sump 132 comes preassembled

Drain Pump Series Model Pump with Basin

104*M72 105 M53 110 M55 115 M57 120 M59 131 M98 132*M72

Pump features (models 53, 55, 57, 59, 98)

Passes laundry lint Automatic, float operated mechanical switch 115V/1 Ph, all drain pump series 9 ft. UL listed 3-wire cord and plug (15 ft. cord standard on model 98) Stainless steel screws, guard, handle and switch arm Passes ½” spherical solids 1 ½” NPT discharge 1550 RPM, 60 Hz on 50 series models 1725 RPM on model 98 Non-clogging vortex impeller Glass-filled, polypropylene base with built in strainer on M53 and M55. Model 59, all bronze construction Models 57 and 98 all cast iron construction Temperature rated 130°F UL and cCSAus listed pump

Model 72

Passes laundry lint 115V/1 PH, all drain pump series 9 ft. UL listed 3-wire cord and plug Stainless steel screws, switch arm and lower motor housing Oil free Passes 3/8” spherical solids 1 ½” NPT discharge 3400 RPM Non-clogging vortex impeller Temperature rated 110°F cCSAus listed pump

Basin

Polypropylene construction Corrosion resistant High capacity Gasket sealed polypropylene lid 2” NPT vent 1 ½” NPT discharge 1 ½” compression slip fit for top and side intake Note: 132 comes preassembled, for side inlet only Threaded connections for easy installation May be installed with internal trap for space savings Gas tight cover Temperature rated 130°F Fits under most sinks Basin passes 10’stack test – Models 104 and 132 will not pass 10’ stack test

Check valve (excluding model 104)(30-0181)

“Full Flow” design 1 ½” or 1 ¼: slip x slip union PVC construction For additional specifications, see FM0217

Horsepower

(50 series and model 72) .3, (model 98) 1/2 HP

Volts

115 V

Hertz

60 Hz

Phase

Single Phase

RPM

(53, 55, 57, 59) 1550, (98) 1725 or (72) 3400 RPM

Impeller Type

Non-clogging vortex impeller

Cord Length

9 ft, (15 ft. standard on 98)

Cord Type

UL listed, 3-wire cord and plug