metal slurry pump and dump

Suttner ST-36 Sludge Pump Casting with Hose Barb – PWMall

Suttner ST-36 Sludge Pump Casting with Hose Barb

Suttner ST-36 Sludge Pump Casting with Hose Barb. Turns a pressure washer into a high output pump. Great for flood cleanup, car wash pits, draining pools or chemical spills

Features

Water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions

Debris as large as 3/4” will pass through the casting and out the discharge hose

Vacuums up liquid slurries at a ratio of about 1:11 Example: Using 4 GPM will produce an output of 44 GPM

Hose barb 1 1/2″

Casting Only: Does not include 0 degree 1/4” MPT nozzle, coupling and hose

Specifications

Flow Rate: 11:1

Max Pressure: 4,000 PSI

Max Temp: 104° F.

Inlet: 3/8″ FPT

Nozzle Port: 1/4″ FPT

Weight: 0.80 lb

Please use Nozzle Chart to determine proper nozzle size

WARNING:

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.