p slurry pump impeller replacement

High pressure slurry pump for biomass/magnetic particle (Double cylinder type) | ITEC CO.,LTD.

High pressure slurry pump for biomass / magnetic particle (Double cylinder type)

Our slurry pump can feed the slurry into a high pressure line in a stable manner. The slurry pump consists of cylinders, a plunger pump that supply the water to the cylinder, and a raw material tank. The slurry in the cylinders pumps by the water supply at a maximum pressure of 30MPa. The cylnders and the raw material tank have a stirrer to make the slurry homogeneous. This type is not a magnetic stirrer but an impeller type stirrer, which has high stirring capacity and can handle biomass and magnetic materials.

Slurry supply from the raw material tank to the cylinders can be made by compressed air. This is a double cylinder type, thus it can be operated continuously; the slurry feeding will not stop when either cylinder is empty.

Rotating mechanism to tilt the cylinder allows disassembly and cleaning the cylinder, and rotor blade replacement even with a large stirrer. A touch panel is used for operation, making it easy to operate while viewing the status of the slurry pump.

Characteristics

Feeding of slurry and high viscosity solutions

Feeding of biomass slurry

Feeding of magnetic particle slurry

Easy system cleaning during material changeover with a cleaning switching valve

Easy disassembly and cleaning due to cylinder rotating mechanism

Flow rate adjustment function

Prevention of particle precipitation and separation by stirring

High-pressure continuous supply without pulsation

Specifications

Operating Pressure Up to 30MPa

Operating temperature Room temperature

Feeding rate 0.1-10 ml/min

Volume of cylinders 200ml x2

Size W1450×D800×H1,700

Examples

Liquid with high viscosity

Slurry

*Please contact us regarding viscosity, particle size, concentration and solvent to be used. Depending on the solvent, it may be necessary to change the material of the packing and piping.

Examples of biomass slurry feeding

Thinned wood 10 wt%

Food waste (Coffee grounds) 6 wt%

Food waste (Barley tea) 19.5 wt%

Food waste (Mikan) 13.7 wt%

Green tea 25.7%

Specifications

Utilities

Electricity: Single-phase AC 200V 30A (can be changed)

Compressed air: > 0.5 MPa (connection tube φ10)

System

Type：Double cylinder type (for biomass / magnetic particle slurry)

Feeding rate：0.1-10 ml/min (Large flow type also available)

Cylinders：200ml SUS304 x2

Stirrer: 300 rpm max/ Torque 1.4N/m, 60W

Raw material tank: 4L SUS304 x1 with level sensor

Maximum feeding pressure: 30MPa

Operation: Touch panel

Safety device: Automatic stop by abnormal pressure

Waste water tank and driving water tank: 1 unit each

Cylinder pressurizing pump, feeding pump, and driving water pump: 1 unit each

Options

Spare cylinder

Automatic valve for cleaning (air-operated valve)