EUR
en
A well pump is a cost-effective way to get water to your home because there are no monthly utility fees. But like any mechanical device, it eventually wears out and breaks down. When it does, you can expect to spend between $975 and $2,575, or a national average of $1,775, to replace your well pump.
Most well pump replacement projects fall between $975 and $2,575, but many factors can add additional costs. A small hand pump can cost as little as $200, while a high-end constant-pressure well pump could set you back as much as $5,000.
The cost of the project depends on the type of well pump used in your replacement. Inexpensive hand pumps cost between $160 and $1,450 for professional installation. On the other hand, a high-end solar-powered well pump will set you back between $1,785 and $4,425.
Hand pumps are commonly made from stainless steel, cast iron, or plastic. These manually operated pumps come in models designed for shallow and deep wells and cost $160 to $1,450. Hand pumps are cost-effective and work during power outages, meaning you always have access to fresh water.
Submersible well pumps cost between $275 to $1,550,with higher-priced models having more horsepower. It is important to note that submersible pumps require more piping than other types, increasing overall installation costs. These pumps are available in cast iron and stainless steel and are quieter and more reliable than other pump types.
Jet well pumps are less powerful than submersible pumps and come at a lower price point, with models available for shallow and deep wells. You can expect to spend between $225 to $1,110 for a jet pump installation.
Typically, these pumps are less reliable than self-priming submersible pumps and prone to motor breakdowns. In most cases, replacing the motor is as costly as purchasing a new jet pump.
Shallow well pumps work for wells 25 feet deep or less. These pumps cost between $225 to $800 and typically feature low-powered motors and less expensive materials.
Deep well pumps deliver water from wells as deep as 150 feet and cost between $435 to $1,100. Horsepower typically ranges from 0.5 to two horsepower, and these pumps are typically made from stainless steel, cast iron, thermoplastic, or carbon ceramic.
Constant-pressure pumps are considered a high-end option, costing between $2,000 to $5,000. These pumps feature a variable frequency drive system to control water pressure, ensuring even pressure across your home.
Solar pumps are becoming more popular. They use a combination of the sun’s rays and traditional electricity for power. They feature plastic and stainless steel designs ranging from $1,785 to $4,425. These high-end pumps work with both shallow and deep wells and save money on your electricity bills.
Windmill water pumps may sound like something straight out of a fairytale, but these expensive well pumps are ideal for off-grid homes and work as a backup for solar systems. You can expect to spend between $5,000 to $21,500 for windmill installation, depending on your needs.
A new well pump is part of your complete well system, and there are many factors affecting your total cost, including well size, pipework, wiring, labor rates, and more.
The depth of your well is an essential factor in the cost because it affects the size and horsepower of the pump you need to draw water reliably. Deeper wells require more labor and larger pumps, increasing overall costs for your replacement project. It is important to note that any well over 25 feet is considered a deep-water well.
Well systems require pipework. While some pump replacements will not require additional pipework, many projects require adding or replacing pipes, especially if you are upgrading to a different type of well pump. Pipe length and the experience of your plumber affect your overall costs.
Unless you are installing a hand pump, your project will require an electrician to complete the wiring portion of your project. Electrician rates vary widely based on your location, and your pump expert will work with a local professional in your area.
Your pressure tank works with your well pump to store the water pumped from your well for home use. Many times, replacing your well pump is not enough, and the problem stems from your pressure tank. Pressure tank replacement is costly, and you can expect to spend between $800 to $3,900 for installation.
Labor makes up a sizable portion of your total project cost. Pump professionals typically charge per hour, with well pump replacement costs ranging from $45 to $150 per hour,for an average project total of $250 to $700.
Labor rates depend on your location, the experience of the pump professional, the complexity of your project, and additional pipework or wiring needed to complete your project.
Sometimes, pump professionals can repair an old well pump, saving you a lot of upfront costs. Consider these related services to help increase the lifespan of your water well pump and water tank.
If your pump quits working, you may not need an entirely new one. Your pump works hard to deliver fresh well water to your storage tank daily, so the wear and tear on the pump can necessitate repairs. Often, repair costs are lower than a complete replacement, costing between $250 to $1,100, depending on the problem.
Professionals recommend having your well system inspected once per year, or more if you notice any problems with your water supply. A well inspection costs between $285 to $515,and it is always best to complete any repairs as soon as possible.
Well pump replacement costs vary depending on location, cost of living, and the materials and complexity of your pump system.
Your well system comprises your well water supply, well pump, and pressure tank. It’s important to have a professional inspect your system annually. Watch for these signs that it’s time to have your well system inspected:
Well pumps typically last 8 to 15 years. The largest factor affecting the lifespan of your well pump is its duty cycle. The more stress you put on your pump because of high water demands, the shorter your pump’s lifespan.
No. Well pump replacement is best left to the professionals. It is a complex process that can lead to voided warranties if improperly completed.
It depends on your personal homeowner’s insurance policy. Typically, your homeowner’s insurance covers damage caused by natural disasters or vandalism. Most likely, your policy does not cover wear and tear or subsequent repair costs.
Wells are cost-effective water delivery systems for many homeowners, especially those looking to go green or live off-grid. Your well pump works hard every day to bring you fresh water. When it wears out, you can expect to spend between $975 to $2,575,or a national average of $1,775,to replace your well pump.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.