rubber slurry pump yard

K PUMP Manual

K Pump User’s Guide Overview

The document provides a user's guide for the K Pump, which is designed to infiltrate tumescent fluid into patients during cosmetic or plastic surgery procedures. It outlines safety information.

Overview & Intended Use

This K Pump User’s Guide provides information about using the K Pump infil trator, set-up, performing cleaning / troubleshooting, and obtaining support.

The K Pump is designed to infil trate tumescent fluid into a patient during cosmetic or plastic surgery pract ices.

Electronic Accessories and Equipment

Following is a list of approved electrical accessories for the K Pump:

Power Supply: Power supply m ust be IEC 60601-1:1998 com pliant，medical grade; Input 100-240V~1.6a, Max 50-60Hz; Output 24V~2.1a, 50W Max.

Power Cord: Any six f oot hospital-grade power cord. Optionally, if using with MD Resource LS system, any one meter universal jumper cord.

Air Swi tch: Only use air switches s upplied by MD Resource. To minimize trip hazard, our recommended maximum length is three meters. Use of accessories, transducers, and cables other than those sold by Medical Device Resource Company may result in system failure, increased EMC emissi ons, and/or decreased EMC immunity of the K Pu mp.

Electromagnetic Interference

This pump should not be used adjacent to or stacked on ot her equipment except as shown in the LS2 Aspirator pump user gu ide. If it is used in a stacked configuration, care should be taken to observe normal operation of system components. Medical electrical equipment needs special precautions regarding EMC and needs to be installed and put in service according to instructions and the EMC information included in Appendix C. Portable and mobile radio frequency co mmunication devices (e.g. cell phones) can affect medical equipment.

Safety Information

The K Pump is designed to ensure both the highest level of product qu ality and safety for the user. To maintain both qu ali ty and safety, follow the guidelines and instructions in this document.

Use the K Pump only as intended.

Refer all servicing and repairs to M.D. Resource Corp. qualified personnel to maintain your warranty. Any repairs or servici ng performed by the customer voids the warranty.

Store the K Pump within 10 – 32 degrees Celsius (50 - 90 degrees Fahrenheit). Avoid prolonged exposure to direct sunlight.

If any cord or cable is frayed or damaged, replace it immediately with another of the same type and rating as supplied by M.D. Resource Corp. To clean the exterior of the K P ump, follow the UL 60601-1 standard for use in a hospital environment. See “Cleaning the K Pump” for more inf ormation.