EUR
en
This manual contains important information for reliable, proper and efficient operation. Compliance with the operating instructions is of vital importance to ensure reliability and long service life of the pump, and to avoid any risks. These operating instructions do not take into account local regulations; the operator must ensure that such regulations are strictly observed by all, including the personnel called in for installation. This pump unit must not be operate beyond the limit values in the technical documentation for medium handled, speed, density, PH, pressure, temperature, Ampere & voltage of panel, magnetic clutch, vacuum pump and engine rating. The nameplate indicates the type of series/size, main operating data, serial number and engine type. If you need any additional information or instruction exceeding the scope of this manual or any case damage please contact PT. KSB Indonesia head office / KSB representative.
These operating instructions contain fundamental that must be complied with during operation and maintenance. Therefore this operating manual must be read very carefully before you start the pump unit or do any maintenance and service. Not only must the general safety instruction given in this chapter of “safety” be complied with, but also the safety instruction outlined under specific headings. For detail information in index enclose of manual operation of each product.
The safety instructions contained in this manual whose non-observance might cause hazards to persons are specially marked with the general hazard sign, namely Safety sign accordance with DIN 4844-W9 The electrical danger warning is Safety sign accordance with DIN 4844-W8 The word is to introduce safety instructions whose non observance may lead to damage to the machine and its functions. Instruction attached directly to the machine, such as: Arrow indicating the direction of rot ation Marking for fluid connections Must always be complied with and be kept in legible conditions at all times.
All personnel involved in the operation, maintenance, inspection and installation of the machine must be fully qualified to carry out the work involved. Personnel responsibilities, competence and supervision must be clearly defined by the operator. If the personnel in question are not already in possession f the requisite know-how, appropriate training and instruction must be provided. If required, the operator may commission the manufacturer/supplier to provide such training. In addition, the operator is responsible for ensuring that the contents of the operating instructions are fully understood by the responsible personnel.
Non-compliance with safety instructions can jeopardize the safety of personnel, the environment and the machine itself. Non-compliance with these safety instructions will also lead to forfeiture of any and all rights to claims for damages.
It is imperative to comply with the safety instructions contained in this manual, the relevant national and local health and safety regulations and the operator's own internal work, operation and safety regulations.
Any hot or cold components that could pose a hazard must be equipped with the guard by the operator. Guards that are fitted to prevent accidental contact with moving parts (e.g. coupling) must not be removed while the machine is operating. Leakages (e.g. at the shaft seal) of hazardous media handled (e.g. explosive, toxic, hot) must be contained so as to avoid any danger to persons and environment. Pertinent legal provisions must be adhered to. Electrical hazards must be eliminated. (Refer to the relevant safety regulations applicable to different countries and/or the local energy supply companies.)
The operator is responsible for ensuring that all maintenance, inspection and installation work is performed by authorized and qualified personnel who are thoroughly familiar with the manual. Work on the machine must be carried out only during standstill. The shutdown procedure described in the manual for taking the machine out of service must be adhered to without fail. Pump units handling media injurious to health must be decontaminated.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.