small sludge pump for sale

Boiler Feed & Condensate Return Pumps | Xylem US

Bell & Gossett’s Domestic Pump Series

the most complete line of products needed for steam systems.

B Series, low NPSH, style PF-B, PVF-B and HB

3500 RPM Capacities to 160 gpm Discharge Pressures to 100 psig 1750 RPM Capacities to 340 gpm Discharge Pressures to 50 psig

Boiler Feed Series CBEM

Receiver is elevated 24” above the floor Require a minimum 2’ NPSH Pumps condensate up to 212°F (100ºC) at sea level

Boiler Feed Series CBM

Floor mounted for low return lines Pumps condensate up to 210°F (99ºC) at sea level CBM units feature the Series B-35™ pump Cast iron receivers...

Boiler Feed Series CM

Low inlet durable cast iron receivers for maximum corrosion resistance Centrifugal pump (3500 or 1750 RPM) with drip-proof motors (simplex or duplex...

Boiler Feed Series CMED

Three styles of 2’ NPSH centrifugal boiler feed pumps for pumping boiling water (212ºF) at 2 ft NPSH Two series of Centriflo® centrifugal boiler...

Boiler Feed Series CMED – eSV

Large boiler feed units for systems up to 975 BHP Offered with Series e-SV multistage centrifugal pumps Maximum discharge pressure: 200 psi (1380 kPA) Maximum...

Boiler Feed Series CMHD

Offered with Series B35TM 2 ft. NPSH pumps or Centriflo® centrifugal boiler feed pumps For condensate up to 210°F (98.9°C) (at sea level) Capacities...

Boiler Feed Series CMU

Rated for 200°F (93°C) condensate Carbon graphite bearings for improved abrasion and wear resistance Simplex or duplex configuration Designed for...

Boiler Feed Series CSM

Maximum discharge pressure is 90 psi (621 kPa) with Centriflo® pumps Maximum seal temperature is 250°F (121°C) Maximum pump temperature is *200°F...

Boiler Feed Series VCMD

Custom engineered units to maintain optimum boiler levels and system vacuum requirements Four styles to choose from to minimize floor space...

Boiler Feed Series WSC

Available in 3500 RPM (Series C35) and 1750 RPM (Series C17) Capacities to 600 GPM (37.8 l/s) Pressures to 100 psi (690 kPa)

Boiler Feed Units HBF

Stock Units Rated for 210°F (99°C) condensate Available from 2,160,000 BTU/hr (2250 lbm/hr stm) to 9,600,000 BTU/hr (10,000 lbm/hr stm) sizes Available in Simplex...

Centriflo Series Pumps C35, C17 style PF & PVF

Cast iron, bronze fitted with stainless steel shaft Easily renewable bronze case wearing ring Carbon/ceramic mechanical seals designed for 250°F (121°C) Available...

Clinical/Industrial Vacuum Units MJ / MJS

Rugged Construction, Low Maintenance – Designed and built for many years of dependable service Smoke-free Exhaust – No internal lubrication or sealing oils,...

Stock Boiler Feed Units VBF

Engineered Reliability NPT Inlet, Vent, and Overflow Receiver Openings Field tested performance. Thousands installed and operating economically and...

Vacuum-Boiler Feed Pump Series VCMD

Custom engineered units to maintain optimum boiler levels and system vacuum requirements Four styles to choose from to minimize floor space...

Vacuum Heating Pump Series VL/VLS

Maximum temperature is 180°F (82°C) Pressures to 40 psi (276 kPa)

Vacuum Heating Pump Series VLR/VLRS

Maximum temperature is 180°F (82°C) Pressures to 40 psi (276 kPa)

Vacuum-Boiler Feed Pump Series VCMD

Custom engineered units to maintain optimum boiler levels and system vacuum requirements Four styles to choose from to minimize floor space...

Vacuum-Condensate Return Pump Series VCD

Maximum temperature is 180°F (82°C) Pressures to 75 psi (517 kPa) Vertical Design for Minimum Floor Space Cast Iron Receiver with 20 year corrosion warranty or...

Watchman Series WC Condensate Units

Up to 30 psig discharge Compact Design, requires less floor space Choice of Inlet and Overflow Locations on 14 gallon size Easier to Install: shorter pump...