sump pump kit for basement

65QV SPR Vertical Cantilever Sump Slurry Pumps

65QV SPR Vertical Cantilever Sump Slurry Pumps

Tobee® 65QV - SPR vertical slurry sewage Pump is a cantilever sump pump,Which work submerged to transport high abrasive and high density slurries with large particles.It doesn't need any seal water. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design.and suction agitator is also available.

Tobee™65QV SP(R) Vertical Slurry Pumparecentrifugal slurry pumps submerged in sumpto work. They are designed for delivering abrasive,large particle and high density slurries.These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.Wet parts of type SP pump are made of abrasion-resistant metal. All parts of type SPR pump immersed in liquid are lined with rubber outer liner.They are suited to transport non-edge angle abrasive slurry.

TheSP/SPR Vertical cantilever Sump pumpsisavertical spindle slurry pump. It is designed to transport corrosive, coarse particles, and highly concentrated slurry. It can operate normally without a shaft gland or shaft gland water, and the length of the shaft can be customized to the depth of the liquid level.

The SP/SPRvertical slurry pumpisavertical type slurry pump. The inlet is oriented vertically and downward on one side of the vertical pump, and the outlet is oriented vertically and upward on the other side. It composed of the lower filter platform, pump body, impeller, shaft, guard plate, and bracket. The upper part of the SP/SPR pump is supported by bearings; the pump is installed under the liquid, and no shaft seal is used. It uses a belt drive (BD) and direct drive (CD) transmission type. The depth of the immersion liquid in the standard size range can be adjusted according to the needs of the user.

Vertical Cantilever Pumps Design Features:

1. Vertical sump pumps are vertical, centrifugal slurry pumps submerged in sump to work.

2. They are designed for delivering abrasive, large particle and high density slurries.

3. These pumps have no need of any shaft seal and sealing water.

4. They can also be operated normally for insufficient suction duties.

5. Wet parts of type SP metal vertical slurry pump are made of abrasion-resistant metal.

6. All parts of type SP(R) rubber lined vertical slurry pump immersed in liquid are lined with rubber outer liner. They are suited

7. To transport non-edge angle abrasive slurry.