vertical sump pumps

Casing H19203-01-30A for Mission 2500 Supreme Pump 3×2×13

H19203-01-30A Casing

H19203-01-30A Casing, w/wear pad is used for Mission 2500 Supreme Centrifugal Pump 3x2x13. The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).

Design Features

Versatile stuffing box Thick, strong, concentric casing with replaceable casing wear pad Casing gasket receded for protection. Replaceable stuffing box cover with dual stuffing box bolts Long-life, no-adjustment mechanical seal available for near zero leakage Replaceable shaft sleeve Solid Frame base Labyrinth seals for maximum bearing protection Duplex angular contact bearings Full pipe diameter entrance for minimum turbulence and maximum efficiency Wide semi-open impeller creates lower axial thrust for improved bearing life All sizes feature the same power end

Mission 2500 Supreme Pump Parts List

CASINGS –including studs, nuts and gaskets ItemQtyPart No.Processing#DescriptionMaterial 1*1 H 19203-01-30A 19203AH Casing,3×2×13 Hard iron 1*1 H 19205-01-30A 19205AH Casing,4×3×13, w/wear pad Hard iron 1*1 H 19222-01-30A 19222AH Casing,5×4×14, w/wear pad Hard iron 1*1 H 19122-01-30A 19122AH Casing,6×5×11, w/wear pad Hard iron 1*1 H 19123-01-30A 19123AH Casing, 6×5×14, w/wear pad Hard iron 1*1 H 19763-01-30A 19763AH Casing, 8×6×11, w/wear pad Hard iron 1*1 H 19117-01-30A 19117AH Casing,8×6×14, w/wear pad Hard iron 1*1 H 20937-01-30A 20937AH Casing,10×8×14, w/wear pad Hard iron IMPELLERS and CASING WEAR PADS ItemQtyPart No.Processing#DescriptionMaterial 2*1 H 19204-XX-30 Varies Impeller,3×2×13 Open Ductile Hard iron 2*1 H 19206-XX-30 Varies Impeller,4×3×13 Open Ductile Hard iron 2*1 H2523–XX-30 Varies Impeller,5×4×14 Semi Open Ductile Hard iron 2*1 H2524-XX-30 Varies Impeller,6×5×11 Semi Open Ductile Hard iron 2*1 H2524-XX-30 Varies Impeller, 6×5×14 Semi Open Ductile Hard iron 2*1 H2524-XX-30 Varies Impeller, 8×6×11 Semi Open Ductile Hard iron 2*1 H2525–A0-30 Varies Impeller,8×6×14 Semi Open Ductile Hard iron 2*1 H2526-XX-30 Varies Impeller,10×8×14 Semi Open Ductile Hard iron 1E 1 H2501-01-30A 2501-37AH Wear Pad, 4x3x13 Casing Ductile Hard iron 1E 1 H2502-01-30A 2502-37AH Wear Pad, 5x4x14 Casing Ductile Hard iron 1E 1 H2503-01-30A 2503-37AH Wear Pad, 6x5x11 Casing Ductile Hard iron 1E 1 H2504-01-30A 2504-37AH Wear Pad, 6x5x14 Casing Ductile Hard iron 1E 1 H2505-01-30A 2505-37AH Wear Pad, 8x6x11 Casing Ductile Hard iron 1E 1 H2506-01-30A 2506-37AH Wear Pad, 8x6x14 Casing Ductile Hard iron 1E 1 H2527-01-30A 2527-37AH Wear Pad, 10x8x14 Casing Ductile Hard iron

Remarks

1. XX-Impeller code-First X equals dia.of impeller in inches minus 4.Therefore 10″=6,9″=5, etc…14″use letter A; 2. Second X equals fractional data in 1/8’s.Therefore 1/8″=1, 1/4″=2 ,etc…Thus a 10.5″ impeller is coded as 64, 12″ impeller is coded as 80, 13.25″ impeller is coded as 92 etc… 3. YYY–the metric diameter of impeller, therefore 12″ is coded as 305mm, 11″ is coded as 280mm.