water tank pump

Mody 2HP Submersible Dewatering Pump

Key Features

2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class "F" (155ºC), rated IP68. The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high temperature grease sealed for life. Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 20ft. (6m) length standard (M0.5/M1) and 33 feet on M2. Type SJTW in North America. Double Silicon Carbide/Silicon Carbide and Carbon/Ceramic Mechanical seals with External Oil Seal. 304 SS Outer Casing 304 SS Stator Casing Cast Iron Diffuser Shaft: Heat Treated 410 Stainless Steel Hardware: 304 Stainless Steel Impeller: Cast Iron pH Range 5-8

SPECS

Discharge Connection- 2" Rated Power – 2/0.5 (HP/kW) Speed – 3400(rpm) Rated Current @ 115v 20A(1 Ph.) Solids Passage 6mm, 1/4″ Height – 438mm, 17.25″ Weight – 52kg/23.5lbs

WCT Products has Mody submersible dewatering pumps in 1/2, 1 and 2HP versions. The outboard lip seal prevents solids from infiltrating. Order today!

Mody 2HP stainless steel cased submersible water pump. The M Series pumps feature 2-pole induction continuous rated motors, hardend cast iron impellers for extended life and 304 stainless steel strainers with 1/4" round holes to filter out abrasive particles normally found in raw water. Pump comes equipped with a carrying handle, 20' power cord and 2" NPT male discharge. 116 GPM at 5' head.