EUR
en
Foger Switch Pro 30k is a pretty fancy disposable vape with a detachable battery unit. It offers an impressive 1050mAh battery, but it’s splitted, actually; the battery unit houses an 850mAh rechargeable battery, while the pod unit conceals a 200mAh battery that recharges only when you connect the battery unit.
Big battery aside, the Foger Switch Pro 30k features a transparent e-juice tank, so users can easily track their e-liquid levels while monitoring their puff count and battery level from the side-placed OLED display panel on the pod unit. This modern vape delivers top-notch flavor taste and there are up to 24 flavor choices. It is draw-activated, has custom airflow adjustment, and supports two vaping modes: Norm and Boost.
Your Foger Switch Pro 30k disposable vape may start acting funny if it mistakenly falls to the ground or sand, or if you opened the casing for whatever reason. Nevertheless, some are faulty out of the box, in such scenarios, you should return it immediately to get a replacement or refund.
If you’ve been using yours for a while, and out of the blue it starts acting up, below are some of the fixes to try out.
One of the most frustrating issues is when your Foger Switch Pro 30K doesn’t hit at all. Here’s what might be causing it and how to fix it:
·Dead Battery:The power on the battery pack unit has depleted and the pod unit has also run out of charge.
·Blocked Airflow:Something could be blocking the airflow sensor, or one of your fingers is mistakenly blocking it (since it’s located at the bottom of the device) as you try to hit.
·Faulty Connection: Some internal wire connections may be loose.
·E-liquid Flooding:Flooding is when the coil gets oversaturated with e-liquid, probably due to chain vaping.
1.Check the Battery:Connect the battery pack to power and allow it to charge, then pair the battery unit with the pod unit to charge the battery on the pod unit. Wait for a while and power on the device to see if it functions well.
2.Unclog the airflow:Blow gently into the mouthpiece or use a toothpick to clear any blockage.
3.Try a few hard puffs:Sometimes, strong pulls can clear up minor clogs.
4.Shake the device:If e-liquid is flooding the coil, a gentle shake might help.
5.Let it rest:If you’ve been chain-vaping, the coil may be too saturated. Let it sit for a few minutes.
If your Foger Switch Pro 30K won’t charge, it could be due to an issue with the charging port, cable, or battery.
·Dirty Charging Port:Dust or debris may be blocking the connection.
·Faulty Cable or Adapter:The charger you’re using could be defective.
·Internal Battery Failure:The battery may have failed.
·Overuse or Overheating:Excessive use can shorten battery life.
1.Inspect the Charging Port:Use a dry cotton swab to remove dust or debris.
2.Try a Different Cable and Charger:Use a high-quality USB-C cable.
3.Charge for at Least 30 Minutes:Some batteries need time to wake up after being used to 0%.
4.Try a Different Power Source:Plug it into a different outlet or a power bank.
Not getting the clouds you think you deserve? If your Switch Pro produces little to no vapor, there might be an issue with the coil or airflow system.
·Low E-liquid Level: The device may be running out of juice.
·Burnt Coil:The coil might be clogged or burnt.
·Weak Battery:The battery may not be delivering enough power.
·Airflow Obstruction:Something may be blocking the air vents.
1.Check the E-liquid Level:Look through the transparent glass tank and see if there’s still juice inside, shake the device a bit, too. If you can’t spot any juice, you’re out and should get a new flavor pod.
2.Give it a Break:If you’ve been chain vaping, let the coil rest for a few minutes before continuing.
3.Clean the Mouthpiece and Airflow Vents:Use a toothpick to remove debris that may be on the mouthpiece and airflow openings.
4.Try Recharging:A low battery might be causing weak vapor production.
5.Gently Tap the Device:This can help dislodge any air bubbles in the e-liquid chamber.
A burnt taste is a common issue with vapes and usually means the coil is overheated or the e-liquid is running low.
·Dry Coil:There may not be enough e-liquid saturating the coil.
·Overuse:Chain vaping can cause the coil to overheat.
·Low Battery:A weak battery might not heat the coil properly.
1.Let the Vape Rest:Stop using it for a few minutes to allow the coil to reabsorb liquid.
2.Reduce Chain Vaping:Take slower, spaced-out puffs.
3.Check E-liquid Levels:If you can’t see the e-liquid through the transparent tank, you could be out of juice.
4.Shake the Device:This can help distribute the liquid evenly.
5.Charge the Battery Level: A weak battery can cause inconsistent heating.
Foger Switch Pro 30K is draw-activated; it is meant to only fire when you’re making draws. If yours seems to be firing on its own, this is a serious issue that might not be solved without having to disassemble the device but give it a shot with the tips below.
·Malfunctioning Airflow Sensor: The sensor may be stuck.
·Internal Short Circuit: Faulty wiring may be causing the issue.
1.Blow into the Mouthpiece:This can help clear any blockage in the airflow sensor.
2.Keep it in a Cool Place:Heat can sometimes cause misfires.
If the issue persists, dispose of it safely. Auto-firing vapes can be dangerous and should not be kept carelessly.
Unfortunately, no, the Foger Switch Pro 30K is a disposable vape and is not designed to be refilled. Once the prefilled e-juice is out, you should toss the pod and get a new flavor pod. Thanks to the detachable design, you can simply buy only the pod unit and still use the battery pack from the previous one that just got finished.
It depends on usage. However, after a full charge, expect the battery to last for up to 30 hours on heavy usage. 1050mAh battery is a hell of a capacity, so the Switch Pro does last long. Also, you can use the pod unit while charging the battery pack separately.
The Foger Switch Pro 30K is a high-capacity disposable vape, but like other disposables, it can develop issues over time. Most of these issues—whether it’s not hitting, not charging, or tasting burnt—can be easily fixed with a few simple steps, but if it’s auto-firing, I’m sorry, you might just have to toss it and get a new one. You can purchase a replacement from EightVape at a discounted price.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.