EUR
en
Coil resistance, measured in ohms (Ω), determines how much power (wattage) reaches the coil, affecting vapor production and flavor. Higher Resistance Coils (1.0Ω and above): Generally used for mouth-to-lung (MTL) vaping, producing less vapor and simulating the draw of a traditional cigarette. These coils require lower wattage, making them more efficient and longer-lasting. They work best with e-liquids that have a higher PG (Propylene Glycol) content, which provides a stronger throat hit and better flavor clarity. Lower Resistance Coils (below 1.0Ω): Typically used for direct-to-lung (DTL) vaping, producing more vapor and a stronger throat hit. These coils require higher wattage to function effectively, resulting in more vapor production and intensified flavor. They are best paired with high VG (Vegetable Glycerine) e-liquids, which are thicker and produce denser vapor clouds.
Different vaping devices have varying requirements for e-liquids, based on their coil resistance and power output. Understanding these requirements can help you choose the best e-liquids for your device.
Flavor intensity is influenced by the coil resistance and the type of e-liquid used. Sub-ohm coils paired with high VG e-liquids tend to produce more intense flavors, making them ideal for vapers who prioritize taste. On the other hand, high-resistance coils with high PG e-liquids offer a stronger throat hit and a more pronounced flavor profile, suitable for those who prefer a cigarette-like experience.
The PG/VG ratio of an e-liquid affects its viscosity, flavor, and vapor production. High VG e-liquids (70VG/30PG or higher) suit sub-ohm coils best, as they produce more vapor and provide a smoother hit. High PG e-liquids (50VG/50PG or higher PG content) are better for high-resistance coils, offering a stronger throat hit and quicker wicking.
Choose nicotine content based on the coil resistance and your personal preference. Sub-ohm vaping delivers nicotine more efficiently due to higher vapor production, so you should use lower nicotine levels (3mg or 6mg) to avoid harsh throat hits. Pair high-resistance coils, which produce less vapor, with higher nicotine e-liquids (12mg or higher) to satisfy nicotine cravings more effectively.
The frequency of your vaping sessions also influences the choice of e-liquid. Frequent vapers might prefer e-liquids with lower nicotine content to avoid excessive nicotine intake. In contrast, occasional vapers may opt for higher nicotine e-liquids to satisfy their cravings with fewer puffs.
When it comes to optimizing your vaping experience, selecting the right coil resistance based on your e-liquid choice is essential.
Recommended Resistance: Higher resistance coils (0.7Ω or above). Recommended Wattage: Lower wattage (below 15W). Benefits: Smooth Vape: Higher resistance coils paired with nicotine salts or 50VG/50PG e-liquids ensure a smoother vaping experience. Optimal Nicotine Delivery: Nicotine salts are absorbed more efficiently into the bloodstream, providing a quicker nicotine hit that mimics the sensation of smoking traditional cigarettes. Prevents Coil Burn: Using higher resistance coils at lower wattages prevents the coil from burning out quickly.
Recommended Resistance: Lower resistance coils (below 0.7Ω). Recommended Wattage: Higher wattage, often in the range of 20W and above. Benefits: Proper Vaporization: High VG e-liquids are thicker and require more power to vaporize effectively. Increased Vapor Production: VG is known for producing large, dense vapor clouds. Enhanced Flavor: High wattage allows the coil to heat up more efficiently, enhancing the flavor of the e-liquid.
Recommended Resistance: Typically 0.15Ω to 0.6Ω for sub-ohm coils. Recommended Wattage: Always check the recommended wattage on your sub-ohm coil. Benefits: Optimal Performance: Sub-ohm coils are designed for high-power devices that operate at higher wattages. Avoids Coil Damage: Following the manufacturer’s recommended wattage range for sub-ohm coils helps prevent coil damage. Maximizes Flavor and Vapor: Sub-ohm vaping is known for delivering intense flavors and substantial vapor clouds.
Nicotine strength also plays a role in coil selection: Higher Nicotine Strengths (12mg or higher): These work well with higher resistance coils for MTL vaping. Lower Nicotine Strengths (below 12mg): These are often paired with lower resistance coils for DTL vaping.
When you choose the right coil and e-liquid combination for your vaping device, consider several key factors to ensure a satisfying and safe vaping experience: Personal Preference: The wattage you select is largely a matter of personal preference within the recommended range for your coil. Starting Point: It’s advisable to start at the lower end of the recommended wattage range for your coil. Avoid Overheating: Pushing the wattage beyond the recommended range can lead to overheating. Burnt Taste: If you experience a burnt taste while vaping, it’s a clear sign that the coil or the e-liquid is overheating. Device Compatibility: Each vaping device and coil has specific recommendations for coil resistances and wattage ranges. Consultation: If you are ever in doubt about coil compatibility or the optimal settings for your device, consult your device’s manual or seek advice from a knowledgeable source.
Flavor intensity is influenced by both coil resistance and e-liquid type; sub-ohm coils with high VG e-liquids deliver richer flavors. High-resistance coils with high PG e-liquids offer a pronounced flavor profile and stronger throat hit.
Getting started with vaping can be a bit overwhelming with all the options and technical details.
Before using a new coil, it’s essential to prime it properly. This involves adding a few drops of e-liquid directly onto the cotton inside the coil and allowing it to soak for a few minutes. Priming ensures that the cotton is fully saturated with e-liquid before you start vaping, preventing dry hits and burnt taste.
Place a few drops of e-liquid on each cotton hole visible on the coil’s body. Add a few drops inside the coil where the cotton is visible. Assemble your tank and fill it with e-liquid. Let the coil sit in the tank for at least 5-10 minutes before using it. Start vaping at a lower wattage and gradually increase it to your desired setting.
Keeping your vaping device clean and regularly replacing your coils are crucial for maintaining optimal performance and flavor. Residue from e-liquids can build up over time, affecting the taste and efficiency of your device. Regular cleaning prevents this buildup and ensures that your device functions correctly.
Clean Your Tank: Disassemble your tank and rinse all parts (except the coil) with warm water. Replace Coils: Coils should be replaced every 1-2 weeks, depending on usage and the type of e-liquid used. Check for Leaks: Regularly inspect your device for leaks and ensure all seals and connections are tight.
Vaping can cause dehydration because the primary ingredients in e-liquids, Propylene Glycol (PG) and Vegetable Glycerin (VG), have hygroscopic properties. To counteract this, it’s important to drink plenty of water throughout the day.
Drink Water Regularly: Keep a bottle of water with you and take sips regularly, especially when you vape. Monitor Your Symptoms: Pay attention to signs of dehydration such as dry mouth, headache, and fatigue. Avoid Caffeinated Drinks: Caffeine can contribute to dehydration.
Understanding how to pair e-liquids with the right coils can significantly enhance your vaping experience. By considering factors like PG/VG ratios, nicotine content, and personal preferences, you can tailor your vape setup to achieve the ultimate satisfaction.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.