5 hp trash pump

100RV-SP Vertical Sump Slurry Pump Spares and Parts

100RV-SP Metal Lined Vertical Sump Pumps Parts

including: Impeller SP10206A05A, Casing SP10092A05A, Back Liner SP10041A05A, Lower Strainer SP10116LD21, Strainer SP10116-1 etc.

Impeller SP10206

Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.

Casing SP10092

Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.

Back Liner SP10041

It forms a pump chamber with throat bush and volute liner where the slurry would flow through them, Tobee offers back liners are interchangeable with stardand pump back liners with high chrome, natural rubber, polyurethane for different working condition.

Vertical Slurry Pump Spares

Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones. The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.

Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered.

Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.

Submerged Bearings - None

Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.

Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.

100RV-SP Vertical Slurry Pump

is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.

100RV-SP Vertical Sump Slurry Pump Parts List:

No.Pump ModelPart NameBasic Part No.Part CodeMaterial1 100RV-SP Bearing Housing 004 RV004-1 Ductile2 100RV-SP Bearing Sleeve 008 RV008-3 100RV-SP Bearing 009 R009 SKF/Timken4 100RV-SP Bearing 009D R009D-1 SKF/Timken5 100RV-SP Mounting Plate 019 RV10019 Steel6 100RV-SP End Cover 024 RV024 Ductile7 100RV-SP Low End Cover 024L RV024L-1 Steel8 100RV-SP Key-RV070 Steel9 100RV-SP Washer-85 Steel10 100RV-SP Shim Set 025 RV025-11 100RV-SP Nipple-M10X1 Steel12 100RV-SP Name Plate---13 100RV-SP Rivet--Steel14 100RV-SP Back Liner 041Chrome alloy15 100RV-SP Suction Joint 060 SP10060-16 100RV-SP Lock Nut 061 RV061 Steel17 100RV-SP Labyrinth 062 RV062 Steel18 100RV-SP Nipple 45-M10X1 Steel19 100RV-SP O Ring 064 RV064 Ductile20 100RV-SP Shaft 073 RV10073 Steel21 100RV-SP Shaft Sleeve Ejector 077 RV077-22 100RV-SP Bearing Seal 089 RV089-23 100RV-SP Casing 092Chrome alloy24 100RV-SP Column 102-25 100RV-SP Piston Ring 108 R108 Steel26 100RV-SP End Cover Set Screw-S027M Steel27 100RV-SP Strainer 116 SP10116-1-28 100RV-SP Lower Strainer 116L SP10116L D2129 100RV-SP Casing Seal 124 E4124-30 100RV-SP Discharge Pipe 154 RV10154-31 100RV-SP Flinger 184 RV-184-1-32 100RV-SP Discharge Pipe Gasket 204 SP10204-33 100RV-SP Impeller 206 SP10206 Chrome alloy34 100RV-SP O Ring 217 RV217 Steel35 100RV-SP Spacer Set 290 RV290-36 100RV-SP Suction Pipe 322 SP10322-