8 dredge pump key

Not available - 750 mm (30-inch) Cutter Suction Dredger (CSD) IHC Beaver 4600

750 mm (30-inch) Cutter Suction Dredger (CSD) IHC Beaver 4600

1,330,000 USD

220802-DB

Location: China

All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.

The dredger is a dismountable cutter suction dredger and non-propelled and equipped with an anchor boom installation. The hull consists of six pontoons designed for simple and quick assembly and dismantling. The cutter is driven by slow-running hydraulic motors. The two spuds are each operated by means of a hydraulic ram. All winches are driven by slow-running hydraulic motors. The main engines and hydraulic installation are remote controlled from the dredge master’s desk.

Location: China

Dimensions and Characteristics

Length Over All (with ladder):48.50 m 159-ft

Hull Length (side pontoons):38.00 m 125-ft

Hull Breadth (side pontoons):15.22 m 50-ft

Depth at side:2.85 m 9.4-ft

Draught (avg):1.85 m 6-ft

Capacity

Fuel Tanks:195 t 215 ton

Fresh Water Tank:3000 ltr 792.5 gal

Dredge

Dredge Pumps (2):1750-375-750 (double-walled)

Dredge Pumps Speed:280 rpm

Dredging Depth, maximum:16 m 52.5-ft

Suction Diameter:750 mm 30-in

Discharge Diameter:700 mm 28-in

Cutter

Type:B2385, 6-bladed

Power at Shaft:559 kW 750 hp

Speed:19-25-31 rpm

Spuds

Diameter:850 mm 33.5-in

Deck Machinery

Anchorboom Winches

Pull on 1st layer:12 t 13 ton

Hauling Speed 1st layer (approx):30 m/min 98-ft/min

Wire Diameter:26 mm 1-in

Drum Diameter:521 mm 20.5-in

Ladder Hoisting Winch

Pull on 1st layer:24 t 26.5 ton

Hauling Speed 1st layer:26 m/min (max)85-ft/min (max)

Wire Diameter:36 mm 1.4-in

Drum Diameter:750 mm 29.5-in

Swing Winches (2)

Pull on 1st layer:24 t 26.5 ton

Hauling Speed 1st layer:20 m/min (max)65.6-ft/min (max)

Wire Diameter:36 mm 1.4-in

Drum Diameter:750 mm 29.5-in

Capstan Pull:5 t 5.5 ton

Deck Cranes (2)

Lifting Power:8 t 8.8 ton

Outreach:4.75 m 15.6-ft

Diesel Engine for drive of Dredge Pumps

Number:2 tandem sets

Make/Type:Caterpillar/D398 TA

Bore:159 mm 6.25-in

Stroke:203 mm 8-in

Cylinders:12 in V-Line p/engine

Max Continuous Power:4 x 644 kW 4 x 863 hp

Speed:1200 r.p.m.

Auxillary Diesel Engine

Number:1

Make/Type:Caterpillar/D399 TA

Bore:159 mm 6.25-in

Stroke:203 mm 8-in

Cylinders:16 in V-Line p/engine

Diesel Engine of Auxillary Set

Make/Type:Petter/PJ3

Cylinders:3

Power:22.37 kW 30 hp

Speed:1800 r.p.m.

Auxiliary Equipment

Bilge Pump Movable Petrol driven 2″ centrifugal Pump Cutter Bearing Flushing Pump Glandpumps Square Glandpumps