EUR
en
These Pumpsets are designed to be used to pump water from borewells and are available in multiple sizes from 3 inch (V3) to 10 inch (V4).
Borewell Submersible Pumpsets are available in Radial Flow type and Mixed Flow type. Radial Flow type is suitable for requirements with high lift but low discharge while Mixed Flow type is suitable for low lift high discharge.
Borewell Submersible Pumpsets consists of Electric motor and Pump coupled together. The Pump consists of stack of Stages with each stage comprising a set of impeller and diffuser. When it operates the stages lift the water to the top.
These Pumpsets are suitable for use in homes, Agriculture and Industry.
All borewells comes with Stainless steel pump shaft.
4 inch and 6 inch Pumpsets are available in cast iron and stainless steel configurations
Uses Carbon vs stainless steel Thrust bearing for long life.
Copper winding with High grade plastic insulation for protection
Stainless steel stator body for high durability
Water transfer from borewell to homes, apartments and farms.
Suitable for use in Irrigation systems and industrial water supply.
TEXMO 10" BOREWELL SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance.
Power :5.0 to 60.0 HP
Voltage :340V- 440V
Head :Max. 95M
Disc :Max. 5000LPM
Speed :2900 RPM
TEXMO 9" BOREWELL SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance.
Power :5.0 to 60.0 HP
Voltage :340V- 440V
Head :Max. 106M
Disc :Max. 3200LPM
Speed :2900 RPM
TEXMO 8" BOREWELL SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance.
Power :5.0 to 60.0 HP
Voltage :340V- 440V
Head :Max. 400M
Disc :Max. 2700LPM
Speed :2900 RPM
TEXMO 7" BOREWELL SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance.
Power :2.0 to 30.0 HP
Voltage :340V- 440V
Head :Max. 106M
Disc :Max. 2400LPM
Speed :2900 RPM
TEXMO 6" BOREWELL SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance.
Power :2.0 to 30.0 HP
Voltage :180V – 240V
Head :Max. 468M
Disc :Max. 1440LPM
Speed :2900 RPM
TEXMO 5" BOREWELL SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance.
Power :2.0 to 10.0 HP
Voltage :340V- 440V
Head :Max. 65M
Disc :Max. 48000LPH
Speed :2900 RPM
TEXMO 4" BOREWELL SUBMERSIBLE PUMPSETS are easy to install, efficient and require minimum maintenance.
Power :0.5 to 7.5 HP
Voltage :220V- 240V
Head :Max. 616M
Disc :Max. 22000LPH
Speed :2900RPM
TEXMO 3" BOREWELL SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance.
Power :0.5 to 1.5 HP
Voltage :220V- 240V
Head :Max. 165M
Disc :Max. 4500LPH
Speed :2900 RPM
It is a Pump which is designed to operate in submerged condition and is used in water bodies like openwells, rivers, ponds & lakes
The Pumpsets creates a vacuum which sucks the water and lifts it to the ground.
As it is submerged in water, it does not have any suction limit and can supply water continuously till water level completely drops down to pumpset level.
Openwell Pumpsets are made with Single Stage impeller and Multi-Stage impellers. We also have vertical openwell models suitable for vertical installations.
We TSO series pumpsets which can be installed both vertically and horizontally
Openwell Pumpsets, available in Single phase are generally used for Domestic applications while Three Phase Pumpsets are used in Agriculture and industrial applications.
Energy Efficient – Our Pumpset have high energy efficiency and are BEE star Rated
Low operating Cost – Easy to maintain and Operate
Variety – Pumpsets are available with multiple options in regards to applications, field conditions and budgets
Use of Carbon vs Stainless steel thrust bearing increases the life of pumpsets.
Suitable for pumping water in Homes, Agricultural Field, Gardening.
Can also be used with any irrigation systems available in the market.
Ideal for River and Canal Irrigation
Water Supply to Commercial Establishments like Hotels, Lodges and Hospitals etc.
Pressure boosting in High Rise buildings
AQUATEXEAHM Series Three phase submersible openwell pumps suitable for use in high pressure and high discharge applications like Pumping in rivers, lakes and ponds
Power :3.0 to 7.5HP
Voltage :380 -415 v
Head :Max. 116m
Disc :Max. 600 lpm
Speed :2900 RPM
AQUATEXVTO SeriesOpenwell Multistage Submersible Pumpsets offer the convenience of high head with high discharge.
Power :3.0 to 7.5HP
Voltage :380 -415 V
Head :Max. 285m
Disc :Max. 1600 lpm
Speed :2900 RPM
TEXMOTSO/TTO Series Multistage open well submersible pumpsets – offer the convenience of high head and low discharge
Power :0.5 to 2.0 HP
Voltage :380 -415 V
Head :Max. 97m
Disc :Max.9000lpm
Speed :2880 RPM
AQUATEX EAVM Series Vertical Open-well Submersible pumpsets are easy to install noise free, efficient and require minimum maintenance.
Power :3.0 to 30.0 HP
Voltage :380 - 415 V
Head :Max. 128m
Disc :Max. 5100 lpm
Speed :2900 RPM
AQUATEXASM Series is a Three Phase Openwell Submersible Pumpset designed for very high discharge for agricultural applications.
Power :3.0 to 30.0 HP
Voltage :380 - 415 V
Head :Max. 90m
Disc :Max. 55 LPS
Speed :2900 RPM
AQUATEXASM SP Series is a single phase openwell pumpset with high water discharge available
Power :1.0 to 7.5 HP
Voltage :200V- 240V
Head :Max.42M
Disc :Max. 700 LPM
Speed :2900 RPM
As the name suggests, a Centrifugal Monoblock Pump is water Pump which converts Mechanical Centrifugal force or rotational force in a spinning impeller to Hydraulic force or Pressure force of the water, in order to lift water to a greater height.
The Pumpset creates a vacuum which can suck water from a maximum suction limit of 20 ft and depending on water level at which the pumpset is installed accordingly.
It consists of a Pump part and Electric Motor part. Electric Motor is the driver part while the Pump is the driven part.
The Electric Motor and the Pump is connected together via a common shaft which transfers the power from the Electric motor to the Pump respectively.
Since the set of Motor and Pump coupled together resemble as if they are single part or block, it is called a Monoblock Pumpset.
Centrifugal Monoblock Pumpsets are available in both single phase and three phase power supply.
Absolute Quality – All pumpsets parts are manufactured and assembled within our own facilities.
Highly Energy Efficiency – Our Pumpsets are star-rated for their energy efficiency
Only Pure Copper Winding – We have a separate Copper Winding Unit and maintain highest standards of quality.
Best in Class Durability –Our Pumpsets are heavier and are built to withstand adverse field conditions.
High Quality Materials – All Pumpsets are made from virgin Pig Iron
Agricultural Irrigation
Pressure Boosting in high rise buildings
Industrial Water Supply & transfer
Cooling water circulations
Gardening and sprinkler irrigation.
AQUATEXAMS Series pumpsets were designed developed and field tested with help of farmers to meet their requirements.
Power :2.0 to 15.0 HP
Voltage :340V- 440V
Head :Max.24M
Disc :Max. 4600LPM
Speed :2900RPM
AQUATEXAMH Seriespumpsets were designed developed and field tested with help of farmers to meet their requirements.
Power :1.5 to 30.0 HP
Voltage :340V- 440V
Head :Max. 95M
Disc :Max. 2600 LPM
Speed :2900 RPM
AQUATEXACS Series single phase monoblock pumps were designed for customers who use pumpsets for both agriculture and as well in domestic applications.
Power :1.5 to 5 HP
Voltage :200V – 240V
Head :Max. 42M
Disc :Max. 42m
Speed :2900 rpm
AQUATEXHCS Series single phase monoblock pumps were designed for customers who use pumpsets for both Home and as well in agriculture.
Power :0.5HP to 1.0 HP
Voltage :200V – 240V
Head :Max. 33M
Disc :Max. 690lpm
Speed :2900 rpm
These are a type of Pumpsets in which multiple diffuser and impeller sets are mounted on top of the other connected via common shaft.
Each set of diffuser and impeller is called a stage. Pumpset having more than two stages are called multistage pumpsets.
Multistage Pumps which are built vertically are called Vertical Multistage pumpsets.
Multistage Pumpsets works on the idea that multiple stages connected serially, will impart high pressure force to lift the water to greater height.
High Efficiency Motors
Available in Cast iron and Stainless Steel configurations
Usage of High Grade bearings
Seals available in Carbon v Ceramic and Silicon carbide v Silicon carbide.
Industrial Water Supply
Farming and Animal Husbandry
Boiler Feed Applications
Pressure Boosting systems
AQUATEXAV, AVI, AVS & AVN Series Vertical Multistage High Pressure Centrifugal In-line pumps are non self priming pumps of In-line Design.
Power :Single Phase: 0.5HP to 3HP Three Phase0.5HP to 100HP
Voltage :Single Phase: 200-240V,50hz.
Head :Max. 300m
Disc :Max. 120m3/hr
Speed:2800RPM
AQUATEX High pressure vertical multistage pumpsets are reliable and rugged construction.
Power :3.0 to 20.0 HP
Voltage :340V- 440V
Head :Max. 147M
Disc :Max. 1000 LPM
Speed :2800RPM
Compressor pumps are pumps which utilizes air to push water from the borewell to the surface.
The Compressor Pump consists of the pump connected to a air hose which goes down to the bottom connecting to a air distributor. The air distributor is connected to a perforated delivery pipe which allows water to come in.
It works on the idea that when compressed air pumped into the bore and distributed into the perforated delivery pipe, the very fine air bubbles mix with the water thus lowering their density and lifting the air water mixture through the delivery pipe to the surface.
Efficient Motors.
High Quality Compressors
Our High HP pumpsets can be used with to pump water from two bores simultaneously
High Quality Air distributor creating fine air bubbles
High grade belt to withstand wear tear under filed conditions.
Suitable for Borewell Pumping for homes and offices.
It can also be used in Gardening purposes
AQUATEX BOREWELL COMPRESSOR PUMPS are designed for Domestic,Industrial,Agricultural, Small Farm and Garden purposes. It can draw water from greater depth from 100feet to 650feet. The Bore well compressor Pumps are Splash Oil lubricated, air cooled and reciprocating type. It is not necessary that the compressor should be installed on the bore well. It can be installed at a distance from the Bore well
Head Range :Upto 650feet
Working Pressure:9 Kg/ cm²
Voltage Range :200 / 240 V
HP range :1 to 2.0 HP
Motor Speed :1440 RPM
AQUATEX MONO COMPRESSOR PUMPSare designed for Domestic,Industrial,Agricultural, Small Farm and Garden purposes. It can draw water from greater depth from 100feet to 400feet. The Bore well compressor Pumps are Splash Oil lubricated, air cooled and reciprocating type. It is not necessary that the compressor should be installed on the bore well. It can be installed at a distance from the Bore well
Head Range :Upto 400feet
Cylinders :1
Voltage Range :200 / 240 V
HP range :1 to 1.5 HP
Speed :1440
Hydro Pneumatic Systems is designed to used in large scale pressure boosting operations in apartments, colonies, commercial high rise buildings, Office building, hotels and others.
Hydro- Pneumatic systems consist of 2 to 6 High Pressure Multistage Pumpsets, Suction and Delivery manifolds with valves, Base Frame and suitable control panel.
The Pressure Tanks are connected to the delivery manifold to reduce the no. of starts and stops of pumpsets.
Based on requirement, the Hydro Pneumatic Systems are available with constant speed control panel and variable speed control panel.
Energy Efficient Motors.
Automatic / Manual Selection of pumps
LCD display to show complete systems status.
Time Based Pressure switch sensing for energy saving.
Dry Run and overload protection.
Suitable for Pressure boosting for apartments, High Rise commercial buildings.
Used to increase pressure in gardens and fountains.
Suitable for high pressure water supply in industries for cleaning.
Hydro-pneumatic systems with multistage submersible pumpsets are suitable for negative suction sites.
AQUATEX APS Hydropnuematic system with Vertical multistage pumpsetsis designed to deliver water continuously at all outlets in all Floors of High Rise Apartments and Commercial Buildings with uniform pressure .
Power :Single Phase: 0.5HP to 2HP,Three Phase: 0.5HP to 100HP
Voltage :Single Phase: 220 – 230V,Three Phase: 380 – 415V
Head :Max. 320m
Disc :Max. 150m3/hr
Operating Pressure:Upto 35bar
AQUATEXAPS Hydropnuematic system with Borewell Submersible pumpsets . is designed to deliver water continuously at all outlets in all Floors of High Rise Apartments and Commercial Buildings with uniform pressure .
Power :Single Phase: 0.5HP to 2HP,Three Phase: 0.5HP to 25HP
Voltage :Single Phase: 220 – 230V,Three Phase: 380 – 415V
Head :Max. 350m
Disc :Max.30m3/hr
Operating Pressure:Upto 35bar
Booster Pump systems are designed to improve the water pressure in your piping system.
They are suitable to homes and offices where the water pressure is low or where the pressure of the water is dependent on gravity.
Booster pump systems come with a pressure tank. The pressure tank consists of a diaphragm enclosed within air pressurized tank.
When pumpset is turned on, the diaphragm expands within the same tank, since air is compressible, the volume occupied by air decreases while the pressure increases.
The amount of pressure to be imparted is controlled using a pressure switch.
The pressure switch has two scales on it – Range and Difference. Range refers to maximu pressure and is used to set the cut out pressure (pressure at which pumpset is turned off). Difference refers to level of p[ressure drop and is used to set the cut in pressure (pressure at which pumpset is turned on).
Eg. If range is 3 bar and difference is 1 bar. The cut off pressure is 3 bar and the cut in pressure is 2 bar. (i.e Range = cut out pressure and Range-Difference =cut in pressure)
When the water pressure in the pipe line comes down blow the cut-in pressure, the pumpset will switch on and when pressure increases to cut-out pressure, the pumpset will switch off.
Energy Efficient Motors.
Dynamically balanced rotors ensure vibration free and noiseless operation.
Powered by AC induction motor with High Grade ‘F’ Insulation, suitable for continuous duty.
High quality Forged brass 5 way connector and non return valve.
Automatic ON and OFF depending upon requirement
Suitable for Pressure boosting for homes and offices.
Used to increase pressure in gardens and fountains
AQUATEXAMB a compact pump ideal for pressurised water supply to 1 - 2 showers in residence and apartments.
Power :0.5 HP
Voltage :220V
Head :Max. 32m
Disc :Max. 2300lph
Speed :2800 RPM
AQUATEXADBS Domestic Pressure Booster Pumps are reliable, efficient and boost the pressure in your shower, bathrooms, and kitchens.
Power :0.5HP to 2HP
Voltage :220V,50hz.
Head :Max. 72m
Disc :Max. 7.5m3/hr
Speed:2800RPM
Water Transfer System is a full-fledged system designed to transfer and control the water supply with a fully automatic control system.
The system was developed in order to prevent dry running of pumps and to prevent overflowing of water.
Water Transfer System consists of multiple parallel pumpsets, suction and delivery manifolds with valves, base frame and suitable control panel.
The control panel controls the number of pumpsets to operate based on system discharge and head.
The system is pre-assembled, tested in factory and ready for installation at site.
Protection from Field issues like Low / High voltage, Phase missing / reversal, unbalanced current etc.
Dry running and overload protection with float switch operation.
Automatic PLC allows equal running time for pumpsets.
Timer function available to start and stop the entire system based on customer requirement.
Water Transfer systems with multistage submersible pumpsets are suitable for negative suction sites
Water Transfer in High rise Apartments, High rise Commercial Buildings and Row Houses in housing projects.
Water transfer in hotels, hospitals and hostels.
AQUATEXWater Transfer System is designed to transfer water from the underground water storage to the overhead water tank with fully automatic control system to prevent dry running of pumps and prevents overflow of water. The system is most ideal for High Rise Apartments and Buildings. Water Transfer system consists of Multiple parallel pumpsets, Suction and Delivery manifolds with Valves, Base frame and suitable control panel. The system is pre assembled, tested in the factory and ready for installation at site. Control panel controls the number of pumpsets to operate based on system discharge and Head.
Power :Single Phase: 0.5HP to 2HP,Three Phase :0.5HP to 100HP
Voltage :Single Phase: 220 – 230V,Three Phase: 380 – 415V
Head :Max. 350m
Disc :Max.150m3/hr
Operating Pressure:Upto 35bar
As the name suggests, these types of pumps are used to lift sewage from the underground collection tanks.
It is generally used in apartments, high rise buildings and Sewage treatment plants to remove wastes.
These pumps come with a large channel casing with single vane impeller allowing large solids.
Some models also come with cutters that cut larger semi-solid materials to smaller and manageable sizes.
When in operation , the pumpsets creates a vacuum which sucks the nearby solids and liquids and ejects them out through the discharge pipe.
Our Pumps can handle from 10mm upto 40mm solids
Dual Mechanical Seals to prevent water leakage
Impeller and Casing are chemically coated to improve life and performance.
High Grade Class ‘F’ Insulation to greater heat protect while running.
Available with Cutter option for dealing with large semi solids.
Industrial Waste Water Removal
Farming and Animal Husbandry Waste Removal
Domestic Home Waste Removal
Waste Water Removal from High Rise Apartments and Commercial buildings.
AQUATEXESWP submersible sewage pumps are reliable and easy to use pumps which can be used to remove light sewage from homes and cow dung from dairies.
Power :Single phase 0.5 to 1.5 HP Three phase 0.5 to 3.0 HP
Voltage :Single phase : 220V, 50Hz Three phase : 380V, 50Hz
Head :Max. 20m
Disc :Max. 108m3/hr
Speed :2850 rpm
AQUATEXASWPsubmersible sewage pumps are reliable and high performance high-duty pumps that can be used to remove sewage and waste water.
Power :1.5 to 10.0 HP
Voltage :380V, 50Hz
Head :Max. 43m
Disc :Max. 108m3/hr
Solid handling size:25mm to 50mm
AQUATEX TSWPpumps are submersible sewage pumps with cutters. The Mechanism cuts incoming fibrous material into pieces & permits the smooth passage of fibrous particles.
Power :1.5 to 15HP
Voltage :380V, 50Hz
Head :Max. 49m
Disc :Max. 78m3/hr
These pumpsets are used for the purpose of removing water from a flooded area.
It is generally used in homes and businesses during storms, floods and in mines to remove underground water.
Some models also come with cutters that cut larger semi-solid materials to smaller and manageable sizes.
When in operation, the pumpsets creates a vacuum which sucks the nearby solids and liquids and ejects them out through the discharge pipe.
Dual Mechanical Seals to prevent water leakage
Impeller and Casing are chemically coated to improve life and performance.
High Grade Class ‘F’ Insulation to greater heat protect while running.
Oil lifters to extend the life of mechanical seals by providing efficient lubrication and cooling.
Industrial Waste Water Removal
Farming and Animal Husbandry Waste Removal
Domestic Home Waste Removal
AQUATEX ADP Drainage pumps are rigid pumps that are suitable for draining flood water and stagnant water from basements and storm water drains.
Power :Single Phase: 0.5HP to 3.0HP Three Phase: 1.0HP to 3.0HP
Voltage :Single Phase : 220V, 50Hz Three Phase: 380V, 50Hz
Head :Max. 28m
Disc :Max. 42m3/hr
Solid handling size:8mm to 10mm
AQUATEXCRDSpumps have the unique characteristic of draining water down to the very bottom.
Power :0.5HP
Voltage :220V
Head :Max. 12m
Disc :Max. 6.6m3/hr
Solid handling size:Max. 3mm
AQUATEX CDS pumps have the unique characteristic of draining water down to the very bottom.
Power :0.5HP & 1.0HP
Voltage :Single Phase : 220V, 50Hz Three Phase: 380V, 50Hz
Head :Max. 16m
Disc :Max. 18m3/hr
Solid handling size:Max. 7mm
AQUATEX CDT high performance construction dewatering pumps can take on the toughest construction sites by virtue of their rugged cast iron construction and superior design.
Power :2HP to 7.5HP
Voltage :380V, 50Hz
Head :Max. 40m
Disc :Max. 96m3/hr
Solid handling size:Max. 8.5mm
These are a type of Pumpsets in which multiple diffuser and impeller sets are mounted on top of the other connected via common shaft.
Each set of diffuser and impeller is called a stage. Pumpset having more than two stages are called multistage pumpsets.
Multistage Pumps which are built vertically are called Vertical Multistage pumpsets.
Multistage Pumpsets works on the idea that multiple stages connected serially, will impart high pressure force to lift the water to greater height.
High Efficiency Motors
Available in Cast iron and Stainless Steel configurations
Usage of High Grade bearings
Seals available in Carbon v Ceramic and Silicon carbide v Silicon carbide.
Industrial Water Supply
Farming and Animal Husbandry
Boiler Feed Applications
Pressure Boosting systems
AQUATEXAV, AVI, AVS & AVN Series Vertical Multistage High Pressure Centrifugal In-line pumps are non self priming pumps of In-line Design.
Power :Single Phase: 0.5HP to 3HP Three Phase0.5HP to 100HP
Voltage :Single Phase: 200-240V,50hz.
Head :Max. 300m
Disc :Max. 120m3/hr
Speed:2800RPM
AQUATEX High pressure vertical multistage pumpsets are reliable and rugged construction.
Power :3.0 to 20.0 HP
Voltage :340V- 440V
Head :Max. 147M
Disc :Max. 1000 LPM
Speed :2800RPM
These are a type of Pumpsets in which multiple diffuser and impeller sets are mounted on top of the other connected via common shaft.
Each set of diffuser and impeller is called a stage. Pumpset having more than two stages are called multistage pumpsets.
Multistage Pumps which are built horizontally are called Horizontal Multistage Pumpsets.
Multistage Pumpsets works on the idea that multiple stages connected serially, will impart high pressure force to lift the water to greater height.
High Efficiency Motors
Available in Corrosion resistant Stainless Steel
Hot water application pumps are also available.
Dynamically balanced rotor ensures noiseless operation.
Industrial Water Supply
Farming and Animal Husbandry
Boiler Feed Applications
Pressure Boosting systems
TEXMOAHS SeriesHorizontal Multistage centrifugal pumps are the products from AQUA GROUP- Asia’s only totally integrated pump manufacturing group of companies.
Power :0.5HP to 2HP
Voltage :220V,50hz.
Head :Max
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.