EUR
en
All rotors are heat-treated for high-temperature ratings. Stator winding is impregnated with varnish and head-dried in an industrial oven. Assembled professionally and tested for the highest quality. Standard accessories include cable with an epoxy resin-sealed water-resistant cable base, auto-cut thermal motor protector, dual mechanical seals, and lip seal design. The A-05A is an extremely practical and low-temperature pump with an oil-filled motor and single seal design.
Discharge Sizes 2–3″ Hp Ranges 0.5–3 Applications Sump, Basins & Tanks Motor 2 Pole Solids Handling Size 1/4–1/2″ Max Head 119 ft Max Flow 170 GPM
International standard design: industrial-grade cable, air-cooled motor, silicon carbide seals, and highest-grade cast iron construction. P/U/E impellers capable of performing in sewage applications with solids & fibrous materials. Full range of pumps capable of meeting high head and/or high flow duty points & applications. Oil lip seal mounted outside of seal chamber stops solids from gathering around seal faces. Epoxy-coated surfaces to protect the exterior during the life of operation. Integrates airlock valve
Discharge Sizes 2–4″ Hp Range 0.5–40 Applications Wastewater and Sewage Motor 2–4 Pole Solids Handling Size 1.5–4″ Max Head 119 ft Max Flow 580 GPM Optional Float switch
Rotors heat-treated for high-temperature ratings Stator winding impregnated with varnish and then heat-dried in an industrial oven Assembled professionally and tested for the highest quality Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design
Discharge Sizes 2–4″ Hp Range 0.5–40 Applications Wastewater and Sewage Motor 2–4 Pole Solids Handling Size 1.5–4″ Max Head 119 ft Max Flow 580 GPM Optional Float switch
Designed for the construction industry Lightweight, portable, and durable Motor frame & mechanical seal bracket are made of aluminum alloy Provides extra water cooling to the motor Features all-new design with exchangeable discharges (vertical & horizontal orientations) Equipped with an auto-cut motor protector Automatic version available with built-in float switch to turn the pump on and off
Discharge Sizes 1–2″ Hp Ranges 1/3–1 Applications Sumps, Basins & Tanks Motor 2 Pole Max Head 54 ft Max Flow 76 GPM
Vortex impeller design prevents clogging Radial cutter/cutter ring are corrosion resistant and hardened to 55-60 Rockwell C Single-phase grinder pump equipped with centrifugal switch & internal capacitor motor design provides 5x higher torque than the average capacitor starting motor Assembled professionally and tested for the highest quality Standard accessories include an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design
Discharge Sizes 1.25–2” Hp Range 1–10 Applications Residential Wastewater & Sewage Motor 2 Pole Max Head178 ft Max Flow90 GPM
Rotors heat-treated for high-temperature ratings Stator winding impregnated with varnish and then heat-dried in an industrial oven Precision manufactured Assembled professionally and tested for the highest quality Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design
Discharge Sizes 2–3” Hp Range 0.5–1 Applications Sewage/Effluent Motor 2 Pole Solids Handling Size 0.5–1.5” Max Head50 ft Max Flow143 GPM
Rotors heat-treated for high-temperature ratings Stator winding impregnated with varnish and then heat-dried in an industrial oven IP68 Grade water resistance Precision manufactured Assembled professionally and tested for the highest quality Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design
Discharge Sizes 2–3” Hp Range 2–5 Applications Wastewater/Effluent Motor 2 Pole Solids Handling Size 1.25–2” Max Head90 ft Max Flow345 GPM
All rotors are heat-treated for high-temperature ratings. Stator winding is impregnated with varnish and head-dried in an industrial oven. Assembled professionally and tested for the highest quality. Standard accessories include cable with an epoxy resin-sealed water-resistant cable base, auto-cut thermal motor protector, dual mechanical seals, and lip seal design. The A-05A is an extremely practical and low-temperature pump with an oil-filled motor and single seal design.
Discharge Sizes 2–3″ Hp Ranges 0.5–3 Applications Sump, Basins & Tanks Motor 2 Pole Solids Handling Size 1/4–1/2″ Max Head 119 ft Max Flow 170 GPM
International standard design: industrial-grade cable, air-cooled motor, silicon carbide seals, and highest-grade cast iron construction. P/U/E impellers capable of performing in sewage applications with solids & fibrous materials. Full range of pumps capable of meeting high head and/or high flow duty points & applications. Oil lip seal mounted outside of seal chamber stops solids from gathering around seal faces. Epoxy-coated surfaces to protect the exterior during the life of operation. Integrates airlock valve 5Hp and above come standard with seal leak protection, thermal protection, and 50-ft cable
Discharge Sizes 2–14″ (14>16″ discharge available) Hp Range 0.5–60 Applications Wastewater and Sewage Motor 2–6 Pole Solids Handling Size 1.5–4 3/4″ Max Head 178 ft Max Flow 6700 GPM Optional Float switch
Tungsten Carbide-edged impeller is perfect for pumping sewage and breaking/tearing debris International standard design: epoxy resin-sealed cable, motor protector, dry motor, silicon carbide seal, and high-grade cast iron Superior abrasion-resistant silicon carbide mechanical seal to ensure the best seal C-type impeller and cutter casing cover, on the impeller vanes, shred against the inner cutting blades to break down destructible solids Heat-hardened casing cover designed to withstand abrasions
Discharge Sizes 3” Hp Range 2–5 Applications Wastewater and Sewage Motor 2 Pole Solids Handling Size 2″ Max Head180 ft Max Flow490 GPM Optional Float switch
Equipped with thermal motor protector and epoxy cable base treatment Water-resistant and IP68 compliant Entire cast iron construction Compact design, high head, and high efficiency for a wide range of uses Pressure-reducing design 7.5Hp–15Hp triangular handle design for easy handling on guide rail systems
Discharge Sizes: 2–3” Hp Range: 2–15 Applications: Sumps, Basins, & Tanks Motor: 2 Pole Solids Handling Size 3/4” Max Head 175 ft Max Flow 520 GPM
Rotors heat-treated for high-temperature ratings Stator winding impregnated with varnish and then heat-dried in an industrial oven Assembled professionally and tested for the highest quality Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design
Discharge Sizes 2–4” Hp Range 1–5 Applications Sumps, Basins, & Tanks Motor 2 Pole Solids Handling Size 1/4–3/4” Max Head 102 ft Max Flow 345 GPM
Rotors heat-treated for high-temperature ratings Stator winding impregnated with varnish and then heat-dried in an industrial oven Precision manufactured Assembled professionally and tested for the highest quality Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design
Discharge Sizes 2–3” Hp Range 1/3–1 Applications Sewage/Effluent Motor 2 Pole Solids Handling Size 0.5–1.5” Max Head 50 ft Max Flow 143 GPM
Rotors heat-treated for high-temperature ratings Stator winding impregnated with varnish and then heat-dried in an industrial oven IP68 Grade water resistance Precision manufactured Assembled professionally and tested for the highest quality Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design
Discharge Sizes 2–3” Hp Range 2–5 Applications Wastewater/Effluent Motor 2 Pole Solids Handling Size 1.25–2” Max Head 90 ft Max Flow 345 GPM
Designed for the construction industry Lightweight, portable, and durable Motor frame & mechanical seal bracket are made of aluminum alloy Provides extra water cooling to the motor Features all-new design with exchangeable discharges (vertical & horizontal orientations) Equipped with an auto-cut motor protector Automatic version available with built-in float switch to turn the pump on and off
Discharge Sizes 1–2″ Hp Ranges 1/3–1 Applications Sumps, Basins & Tanks Motor 2 Pole Max Head 54 ft Max Flow 76 GPM
Vortex impeller design prevents clogging Radial cutter/cutter ring are corrosion resistant and hardened to 55-60 Rockwell C Single-phase grinder pump equipped with centrifugal switch & internal capacitor motor design provides 5x higher torque than average capacitor starting motor Assembled professionally and tested for the highest quality Standard accessories include an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design
Discharge Sizes 1.25–3” Hp Range 1–10 Applications Residential Wastewater & Sewage Motor 2 Pole Max Head178 ft Max Flow90 GPM
Designed for civil engineering applications: its portability, double outer casing, and water-cooling motor make it possible to run the pump in low water levels IP68 standard epoxy resin cable, automatic rest motor protector, and silicon carbide double mechanical seal make it durable and leakproof Multi-impeller design with high chrome alloy steel (HiCrFC) impeller, wear plate/wear rings with hardness 55–60 Rockwell
Hp Range 1.5–20 Applications Flood/water control Motor 2 Pole Max Head190 ft Max Flow690 GPM
Designed for civil engineering applications: its portability, double outer casing, and water-cooling motor make it possible to run the pump in low water levels IP68 standard epoxy resin cable, automatic rest motor protector, and silicon carbide double mechanical seal make it durable and leakproof Multi-impeller design with high chrome alloy steel (HiCrFC) impeller, wear plate/wear rings with hardness 55–60 Rockwell
Discharge Sizes 3–6” Hp Range 2–10 Applications Dewatering Motor 2 Pole Max Head125 ft Max Flow670 GPM
Internal casing treated with high solids epoxy coating to improve anti-corrosion and extend product life Dry motor with thermal auto-cut, heat-efficient cast iron motor frame, abrasion-resistant double mechanical seals, and additional oil seal Highly efficient water-cooled motor ensures energy savings even in continuous/intermittent operation Suction impeller design allows for dewatering or circulation applications Pump strainer can be easily replaced with a check valve for dewatering up to 26 feet New casing cover with a metric thread bolt hole to ease valve and adapter connection
Discharge Sizes 2–6” Hp Range 1.5–10 Applications Dewatering Motor 2 Pole Max Head135 ft Max Flow690 GPM
Large flow capacities achieved with the use of axial and mix flow designs Impeller flow guide vane for high efficiency Easy handling and low maintenance Heavy-duty housing and cable leads are waterproofed with hardened epoxy Casted ALBC3 material (aluminum bronze) impeller with superior abrasion/corrosion resistance Equipped to handle small solids; epoxy coating prolongs abrasion/corrosion resistance
Discharge Sizes 4–12” Hp Range 0.5–20 Applications Dewatering Motor 2 Pole (0.5–1Hp) or 4 Pole (2–20Hp) Max Head32 ft Max Flow2480 GPM
Motor connects directly to the impeller for highest efficiency Shaft and impeller precisely balanced to reduce noise and extend product life Standard protection: thermal protector & mechanical leakage detector; other protection devices available Design of impeller and vanes produces higher pump efficiency Equipped with sacrificial anodes, high active metals used to prevent a less active material surface from corroding; reduces rusting corrosion in seawater and increases the pump’s lifetime
Discharge Sizes22 & 28” Hp Range 50–100 Applications Large Volume Dewatering Motor 10 Pole (50–60Hp) or 12 Pole (75–100Hp) Max Head22 ft Max Flow18400 GPM
Capable of priming without flap valve Non-clogging and able to handle large solids Unique lubrication of mechanical seal cavity makes performance more reliable Low rotary speed, reliable operation, easy maintenance, and long product life Equipped with pressure relief valve, solids-handling impeller, abrasion-resistant seal, removable cover plate with easy-grip handle, replaceable wear plate, and removable rotating assembly
Discharge Sizes2–10” Hp Range 1–125 Applications Municipal, Residential, Industrial, Paper Mills, Mines, Poultry & Construction Projects Solids Handling Size 3/4–1.25” Max Head209 ft Max Flow3400 GPM
High Capacity Diaphragm Pump provides automatic and fast priming Oil-Bathed Mechanical Seals allows dry-running capability without damaging the shaft seals Tier 4 Final Engine comes standard with all DBP units and meets the latest engine emission standards Lifting Beam comes standard with all DBP units Different Skid Styles configured to meet your needs High-Efficiency Hydraulic End ensures lower fuel consumption Hinged Pump Housing allows for easy servicing of pump
The DBP Series also contains the following features: Discharge4, 6, 8” Horsepower30–134 Max Capacity3.22 gal/hr Max Head90 ft
All rotors are heat-treated for high-temperature ratings. Stator winding is impregnated with varnish and head-dried in an industrial oven. Assembled professionally and tested for the highest quality. Standard accessories include cable with an epoxy resin-sealed water-resistant cable base, auto-cut thermal motor protector, dual mechanical seals, and lip seal design. The A-05A is an extremely practical and low-temperature pump with an oil-filled motor and single seal design.
Discharge Sizes 2–3″ Hp Ranges 0.5–3 Applications Sump, Basins & Tanks Motor 2 Pole Solids Handling Size 1/4–1/2″ Max Head 119 ft Max Flow 170 GPM
International standard design: industrial-grade cable, air-cooled motor, silicon carbide seals, and highest-grade cast iron construction. P/U/E impellers capable of performing in sewage applications with solids & fibrous materials. Full range of pumps capable of meeting high head and/or high flow duty points & applications. Oil lip seal mounted outside of seal chamber stops solids from gathering around seal faces. Epoxy-coated surfaces to protect the exterior during the life of operation. Integrates airlock valve 5Hp and above come standard with seal leak protection, thermal protection, and 50-ft cable
Discharge Sizes 2–14″ (14>16″ discharge available) Hp Range 0.5–60 Applications Wastewater and Sewage Motor 2–6 Pole Solids Handling Size 1.5–4 3/4″ Max Head 178 ft Max Flow 6700 GPM Optional Float switch
Tungsten Carbide-edged impeller is perfect for pumping sewage and breaking/tearing debris International standard design: epoxy resin-sealed cable, motor protector, dry motor, silicon carbide seal, and high-grade cast iron Superior abrasion-resistant silicon carbide mechanical seal to ensure the best seal C-type impeller and cutter casing cover, on the impeller vanes, shred against the inner cutting blades to break down destructible solids Heat-hardened casing cover designed to withstand abrasions
Discharge Sizes 3” Hp Range 2–5 Applications Wastewater and Sewage Motor 2 Pole Solids Handling Size 2″ Max Head180 ft Max Flow490 GPM Optional Float switch
Equipped with thermal motor protector and epoxy cable base treatment Water-resistant and IP68 compliant Entire cast iron construction Compact design, high head, and high efficiency for a wide range of uses Pressure-reducing design 7.5Hp–15Hp triangular handle design for easy handling on guide rail systems
Discharge Sizes: 2–3” Hp Range: 2–15 Applications: Sumps, Basins, & Tanks Motor: 2 Pole Solids Handling Size 3/4” Max Head 175 ft Max Flow 520 GPM
Rotors heat-treated for high-temperature ratings Stator winding impregnated with varnish and then heat-dried in an industrial oven Assembled professionally and tested for the highest quality Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design
Discharge Sizes 2–4” Hp Range 1–5 Applications Sumps, Basins, & Tanks Motor 2 Pole Solids Handling Size 1/4–3/4” Max Head 102 ft Max Flow 345 GPM
Rotors heat-treated for high-temperature ratings Stator winding impregnated with varnish and then heat-dried in an industrial oven Precision manufactured Assembled professionally and tested for the highest quality Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design
Discharge Sizes 2–3” Hp Range 1/3–1 Applications Sewage/Effluent Motor 2 Pole Solids Handling Size 0.5–1.5” Max Head 50 ft Max Flow 143 GPM
Rotors heat-treated for high-temperature ratings Stator winding impregnated with varnish and then heat-dried in an industrial oven IP68 Grade water resistance Precision manufactured Assembled professionally and tested for the highest quality Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design
Discharge Sizes 2–3” Hp Range 2–5 Applications Wastewater/Effluent Motor 2 Pole Solids Handling Size 1.25–2” Max Head 90 ft Max Flow 345 GPM
Designed for the construction industry Lightweight, portable, and durable Motor frame & mechanical seal bracket are made of aluminum alloy Provides extra water cooling to the motor Features all-new design with exchangeable discharges (vertical & horizontal orientations) Equipped with an auto-cut motor protector Automatic version available with built-in float switch to turn the pump on and off
Discharge Sizes 1–2″ Hp Ranges 1/3–1 Applications Sumps, Basins & Tanks Motor 2 Pole Max Head 54 ft Max Flow 76 GPM
Designed for civil engineering applications: its portability, double outer casing, and water-cooling motor make it possible to run the pump in low water levels IP68 standard epoxy resin cable, automatic rest motor protector, and silicon carbide double mechanical seal make it durable and leakproof Multi-impeller design with high chrome alloy steel (HiCrFC) impeller, wear plate/wear rings with hardness 55–60 Rockwell
Hp Range 1.5–20 Applications Flood/water control Motor 2 Pole Max Head190 ft Max Flow690 GPM
Designed for civil engineering applications: its portability, double outer casing, and water-cooling motor make it possible to run the pump in low water levels IP68 standard epoxy resin cable, automatic rest motor protector, and silicon carbide double mechanical seal make it durable and leakproof Multi-impeller design with high chrome alloy steel (HiCrFC) impeller, wear plate/wear rings with hardness 55–60 Rockwell
Discharge Sizes 3–6” Hp Range 2–10 Applications Dewatering Motor 2 Pole Max Head125 ft Max Flow670 GPM
Internal casing treated with high solids epoxy coating to improve anti-corrosion and extend product life Dry motor with thermal auto-cut, heat-efficient cast iron motor frame, abrasion-resistant double mechanical seals, and additional oil seal Highly efficient water-cooled motor ensures energy savings even in continuous/intermittent operation Suction impeller design allows for dewatering or circulation applications Pump strainer can be easily replaced with a check valve for dewatering up to 26 feet New casing cover with a metric thread bolt hole to ease valve and adapter connection
Discharge Sizes 2–6” Hp Range 1.5–10 Applications Dewatering Motor 2 Pole Max Head135 ft Max Flow690 GPM
Large flow capacities achieved with the use of axial and mix flow designs Impeller flow guide vane for high efficiency Easy handling and low maintenance Heavy-duty housing and cable leads are waterproofed with hardened epoxy Casted ALBC3 material (aluminum bronze) impeller with superior abrasion/corrosion resistance Equipped to handle small solids; epoxy coating prolongs abrasion/corrosion resistance
Discharge Sizes 4–12” Hp Range 0.5–20 Applications Dewatering Motor 2 Pole (0.5–1Hp) or 4 Pole (2–20Hp) Max Head32 ft Max Flow2480 GPM
Motor connects directly to the impeller for highest efficiency Shaft and impeller precisely balanced to reduce noise and extend product life Standard protection: thermal protector & mechanical leakage detector; other protection devices available Design of impeller and vanes produces higher pump efficiency Equipped with sacrificial anodes, high active metals used to prevent a less active material surface from corroding; reduces rusting corrosion in seawater and increases the pump’s lifetime
Discharge Sizes22 & 28” Hp Range 50–100 Applications Large Volume Dewatering Motor 10 Pole (50–60Hp) or 12 Pole (75–100Hp) Max Head22 ft Max Flow18400 GPM
Capable of priming without flap valve Non-clogging and able to handle large solids Unique lubrication of mechanical seal cavity makes performance more reliable Low rotary speed, reliable operation, easy maintenance, and long product life Equipped with pressure relief valve, solids-handling impeller, abrasion-resistant seal, removable cover plate with easy-grip handle, replaceable wear plate, and removable rotating assembly
Discharge Sizes2–10” Hp Range 1–125 Applications Municipal, Residential, Industrial, Paper Mills, Mines, Poultry & Construction Projects Solids Handling Size 3/4–1.25” Max Head209 ft Max Flow3400 GPM
High Capacity Diaphragm Pump provides automatic and fast priming Oil-Bathed Mechanical Seals allows dry-running capability without damaging the shaft seals Tier 4 Final Engine comes standard with all DBP units and meets the latest engine emission standards Lifting Beam comes standard with all DBP units Different Skid Styles configured to meet your needs High-Efficiency Hydraulic End ensures lower fuel consumption Hinged Pump Housing allows for easy servicing of pump
The DBP Series also contains the following features: Discharge4, 6, 8” Horsepower30–134 Max Capacity3.22 gal/hr Max Head90 ft
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.