c diesel slurry pumps

Impeller O-ring RV064S10 for 100RV SP Cantilever Sump Pump

Impeller O-ring RV064S10

Impeller O-ring RV064S10 is used for 100RV-SP Cantilever Sump Pump and 100RV-SPR Rubber Vertical Pump.

Slurry pump O-ring

Slurry pump O-ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.

100RV-SP Vertical Slurry Pump

100RV-SP Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.

Design Features:

Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones. The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.

Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered.

Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.

Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.

Upper Strainers – Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump.

Lower Strainers – Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.

Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.

Submerged Bearings - None

Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.

Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.

100RV SP Vertical Pump Parts List:

No.Pump ModelPart NameBasic Part No.Part CodeMaterial1 100RV-SP Bearing Housing 004 RV004-1 Ductile2 100RV-SP Bearing Sleeve 008 RV008-3 100RV-SP Bearing 009 R009 SKF/Timken4 100RV-SP Bearing 009D R009D-1 SKF/Timken5 100RV-SP Mounting Plate 019 RV10019 Steel6 100RV-SP End Cover 024 RV024 Ductile7 100RV-SP Low End Cover 024L RV024L-1 Steel8 100RV-SP Key-RV070 Steel9 100RV-SP Washer-85 Steel10 100RV-SP Shim Set 025 RV025-11 100RV-SP Nipple-M10X1 Steel12 100RV-SP Name Plate---13 100RV-SP Rivet--Steel14 100RV-SP Back Liner 041Chrome alloy15 100RV-SP Suction Joint 060 SP10060-16 100RV-SP Lock Nut 061 RV061 Steel17 100RV-SP Labyrinth 062 RV062 Steel18 100RV-SP Nipple 45-M10X1 Steel19 100RV-SP O Ring 064-20 100RV-SP Shaft 073 RV10073 Steel21 100RV-SP Shaft Sleeve Ejector 077 RV077-22 100RV-SP Bearing Seal 089 RV089-23 100RV-SP Casing 092Chrome alloy24 100RV-SP Column 102-25 100RV-SP Piston Ring 108 R108 Steel26 100RV-SP End Cover Set Screw-S027M Steel27 100RV-SP Strainer 116 SP10116-1-28 100RV-SP Lower Strainer 116L SP10116L D2129 100RV-SP Casing Seal 124 E4124-30 100RV-SP Discharge Pipe 154 RV10154-31 100RV-SP Flinger 184 RV-184-1-32 100RV-SP Discharge Pipe Gasket 204 SP10204-33 100RV-SP Impeller 206Chrome alloy34 100RV-SP O Ring 217 RV217 Steel35 100RV-SP Spacer Set 290 RV290-36 100RV-SP Suction Pipe 322 SP10322-