EUR
en
The 10-inch Heavy Duty Slurry Pump is engineered for high-solids, abrasive, and high-viscosity applications where conventional pumps fail. Designed to handle 40-70 percent solids and particles up to 9 inches, it delivers flow rates of 1,600-5,000 GPM, with a head of up to 240 feet. Built with a non-clog EDDY Pump design, this pump excels in mining, dredging, and industrial slurry transport while maintaining consistent performance in demanding environments.
Non-clog pump design that maintains steady flow when handling high solids, debris, and abrasive materials
Capable of pumping 40 to 70 percent solids by weight, reducing water usage, and increasing material transfer efficiency
Handles large solids up to 9 inches, minimizing the need for pre-screening or size reduction
High flow capacity supports demanding production rates in dredging, mining, and industrial operations.
Designed for high viscosity and high specific gravity slurries that overwhelm conventional centrifugal pumps
Heavy-duty wear components extend service life in abrasive and corrosive environments
A self-contained mechanical-seal flushing system improves seal reliability and reduces maintenance downtime.
Flexible deployment options allow vertical or horizontal installation to suit site-specific requirements.
Flow Range: 1600 – 5000 GPM
Head Range: Up to 240 ft
Solids Handling: Up to 9 inches
Percent Solids: Up to 40–70%
Production Rate: 300 – 350 yd³/hr
Motor Speed: 1200 RPM
Discharge Size: 10 inch
Suction Size: 12 inch
Pump Orientation: Can be deployed horizontally or vertically
Rotor: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless
Volute Casing: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless
Shaft: Chromoly or Stainless Steel
Mechanical Seal: Dual Tungsten Carbide or Silicon Carbide with self-contained seal flushing system
Bearing Housing: Ductile Iron or Stainless Steel
The pump curve for the 10-inch slurry pump shows that the pump maintains strong flow performance across varying head conditions while handling high-solids, abrasive, and viscous slurries. It helps operators predict operating efficiency, power requirements, and system behavior, ensuring proper pump selection and reliable performance in demanding industrial and dredging applications.
The 10-inch slurry pump is widely used in mining operations for moving abrasive slurries, tailings, and high-density materials. Its ability to handle large solids and high solids concentrations supports continuous production while reducing downtime in harsh mining environments.
This pump is well-suited for dredging projects that require efficient transport of sand, silt, and sediment over long distances. High flow capacity and non-clog performance make it effective for river, harbor, and pond dredging applications.
In sand and aggregate processing, the pump reliably transfers sand mixtures and coarse materials without frequent blockages. Its robust construction supports high production rates while handling abrasive materials common in aggregate operations.
The pump supports oil and gas operations by handling drilling mud, sludge, and abrasive fluids encountered during extraction and processing. Its ability to manage high viscosity fluids improves reliability in demanding upstream and midstream applications.
Designed to handle corrosive and abrasive slurries, the pump is used in chemical processing facilities where material consistency and uptime are critical. Durable materials and seal systems help maintain performance in aggressive chemical environments.
In paper and pulp mills, pumps transfer fibrous slurries, waste streams, and process byproducts. Its non-clog design reduces interruptions caused by stringy or debris-laden materials common in pulp processing.
The pump is commonly deployed in power generation facilities to move fly ash and coal ash slurries. High solids-handling capability enables efficient ash transport while minimizing wear and maintenance requirements.
For wastewater treatment and industrial sludge handling, the pump manages thick sludge, grit, and solids without performance loss. This supports reliable material movement in treatment plants and industrial waste management systems.
An onshore oilfield drilling operation was experiencing persistent issues with drilling-mud transfer due to high-viscosity fluids, abrasive cuttings, and fluctuating solids content. Existing pumps were prone to clogging and rapid wear, resulting in unstable flow rates, frequent shutdowns, and increased maintenance demands. These interruptions slowed drilling progress and raised overall operating costs.
The operation integrated a 10-inch heavy-duty slurry pump into the drilling mud circulation and transfer system. The pump’s non-clog design and ability to handle high-solids concentrations enabled it to move dense, abrasive drilling mud without flow disruption. Its robust construction and seal system improved reliability while accommodating variations in mud density and solids loading throughout drilling cycles.
The drilling site achieved consistent, predictable mud flow, enabling uninterrupted drilling operations. Pump-related downtime was significantly reduced, maintenance intervals were extended, and component wear decreased despite abrasive conditions. Overall drilling efficiency improved, leading to better schedule adherence and lower long-term operating costs.
The pump is designed to handle abrasive slurries, sludge, drilling mud, sand mixtures, grit, mine tailings, and industrial waste streams. It performs well with high viscosity fluids and solids-laden materials that typically cause clogging or rapid wear in conventional pumps.
The 10-inch slurry pump can operate with solids concentrations ranging from 40 to 70 percent by weight. This high solids capability allows operators to move more material with less water, improving overall system efficiency and reducing disposal or processing costs.
This pump can handle solids up to 9 inches in diameter. This capability reduces the need for upstream screening or size reduction, making it suitable for applications with debris, rocks, or oversized particles.
The pump delivers flow rates between approximately 1,600 and 5,000 GPM with head capabilities reaching up to 240 feet. This wide operating range supports a range of applications, from short-distance transfers to long slurry pipelines.
The non-clog design prevents material buildup inside the pump, ensuring consistent flow even with abrasive, debris-laden slurries. This reduces unplanned shutdowns, minimizes maintenance requirements, and improves overall system reliability.
Yes, the 10-inch slurry pump supports both vertical and horizontal installations. This flexibility allows it to be adapted to different site layouts, dredging setups, and industrial process requirements.
The pump is widely used in mining, dredging, sand and aggregate processing, oil and gas, chemical processing, paper and pulp, power generation for fly ash handling, and wastewater or industrial sludge applications.
Heavy duty wear components and hardened materials allow the pump to operate reliably in highly abrasive conditions. This design extends component life and maintains performance, unlike conventional centrifugal pumps, which experience rapid degradation.
The pump features durable wear parts and a self-contained mechanical-seal flushing system that helps protect seals and bearings. This reduces maintenance frequency, extends service intervals, and lowers overall lifecycle costs.
The pump curve helps engineers understand how flow, head, and power interact under operating conditions. By reviewing the curve, users can select the correct operating point to ensure efficient performance, proper motor sizing, and long-term reliability for their specific application.
At EDDY Pump Corporation, we promise innovative, reliable, and efficient pump solutions with exceptional service, ensuring optimal performance and minimal downtime in the most challenging environments.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.