d 6 inch slurry pump parts

Zoeller M57 3/10 HP 1-1/2-Inch Discharge Automatic Sump Pump

Product Description

Standard Features

Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems available. Corrosion-resistant, powder-coated epoxy finish. No sheet metal parts to rust or corrode. Stainless steel screws, switch arm, guard, and handle. No screens to clog. Watertight, neoprene square ring between motor and pump housing. Solid, buoyant, polypropylene float. Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor. Upper and lower sleeve bearings running in bath of oil. Entire unit pressure-tested after assembly. Carbon and ceramic shaft seal. Maximum temperature for effluent or dewatering: 130 °F (54 °C). Passes 1/2” (13 mm) spherical solids. 1-1/2” NPT discharge. On point: 7-1/4” (18 cm). Off point: 3” (8 cm). Major width: 10-3/32″ (26.2 cm). Major height: 10-1/16″ (25.6 cm). Watertight and dust-tight. 3 year limited warranty on Models 53 & 57. 1 year limited warranty on Models 55 & 59.

Model 57 (60 Hz only)

Cast iron switch case, housings, base, and impeller. Stainless steel guard and handle. Cast iron sleeve bearings.

Options for Special Applications:: Variable level float switches. Variable level long cycle systems. Special cord lengths of 15’, 25’ or 35’ (5 m, 8 m or 11 m). 50′ (15 m) cord lengths available for 230 V units only. Alarm systems. Duplex systems. Variable level control systems.

Motor 3/10 HP Voltage 115 or 230 V Phase 1 Ph Hertz 60 Hz RPM 1550 RPM Type Shaded pole Insulation Class B Amps 4.8 – 9.7 Amps Operation Automatic or nonautomatic Auto On / Off Points 7-1/4″ / 3″ (18.4 cm / 7.6 cm) Discharge Size 1-1/2″ NPT Solids Handling 1/2″ (12 mm) spherical solids Cord Length 9′ (3 m) auto, 15′ (5 m) nonauto Cord Type UL listed, 3-wire cord and plug Max Head 19.25′ (5.9 m) Max Flow Rate 43 GPM (163 LPM) Max Operating Temperature 130 °F (54 °C) Cooling Oil filled Motor Protection Auto reset thermal overload Cap Cast iron or bronze Motor Housing Cast iron or bronze Pump Housing Cast iron or bronze Base Cast iron, bronze or engineered thermoplastic Upper Bearing Sleeve bearing Lower Bearing Sleeve bearing Mechanical Seals Carbon and ceramic Impeller Type Non-clogging vortex Impeller Plastic, cast iron or bronze Hardware Stainless steel Motor Shaft AISI 1215 cold roll steel Gasket Neoprene

Other Details

3 years