heavy duty slurry pump lowes

fm0487.pdf

SUMP/SEWAGE BASINS

CONSULT FACTORY FOR LARGER SIZE BASINS OR SPECIAL APPLICATIONS.

Available in high density polyethylene structural foam (PSF), polyethylene or fiberglass

Ideal for residential, commercial and industrial applications

Complete with necessary sealing hardware and flanges

Available with 2" or 3" vent and 2" or 3" discharge

Lid with gasket and 4" cast iron inlet hub with anticorrosion coating are included with the sewage basins

Centerline of hub is located 10-1/2" from top of basin (std.). Custom locations available

Polyethylene sewage pump basins are IAPMO approved. For 10' stack test models, refer to charts on pages 2 and 3

Sealed (Radon) basins for sump pumps in 18" x 22" and 18" x 30" sizes

Polyethylene sump basin available with plastic unsealed covers in 18" x 22"

Sewage basins are watertight and gastight when properly installed

Durable steel cover with gasket standard on simplex and duplex sewage basins

One piece, seamless construction on all basins

Duplex covers include two pump plates and inspection plate

Ready to install for economical and simple installation

Dimensional Engineering data available

Temperature rated 130°F

Fiberglass models available that will pass the 10' water stack test (Refer to charts on pages 2 and 3) (L. A. - RR-5311)

Various custom diameters & lengths available in fiberglass, consult factory. Also with 10' water stack test.

18" SUMP BASIN COVERS AND EXTENSIONS

SIMPLEX SEWAGE BASIN SUMP BASINS RADON BASINS

One Piece, Polyethylene with 1-1/2" Discharge and Cord Grommet.

One Piece, Polyethylene Molded with 3" x 13" Opening.

One Piece, Steel with 3" Vent, 1-1/2" Discharge, and Cord Grommet (Radon Lid).

Basin Extensions, for use with PSF 18" diameter basins:

6" riser extension w/ hardware.

12" riser extension w/ hardware.

ADDITIONAL INFO FOR PSF BASINS

PSF basin predrilled 4" inlet, no hub, no torque stops - 18" x 30"

PSF basin no hole, no hub, no torque stops - 18" x 30"

PSF basin predrilled 4" inlet, w/ 4" pipe seal, no torque stops

18" & 24" DIAMETER BASIN AND COVERS

POLYETHYLENE/POLYETHYLENE STRUCTURAL FOAM/FIBERGLASS

DUPLEX BASIN AND COVER INCLUDES:

Discharge and vent flange

Cord seals

4" inlet hub - cast iron shown

Inspection plate

Gaskets and hardware

SIMPLEX BASIN AND COVER INCLUDES:

Discharge and vent flange

Cord seal

4" Inlet hub

Gaskets and hardware

SIMPLEX SEWAGE BASINS DUPLEX SEWAGE BASINS

18" x 30" Polyethylene Structural Foam (PSF), Polyethylene or Fiberglass

24" x 30" Polyethylene or Fiberglass

30" x 36" Polyethylene or Fiberglass

36" x 36" Polyethylene or Fiberglass

48" x 48" Fiberglass

30", 36" & 48" DIAMETER BASINS AND COVERS - POLYETHYLENE/FIBERGLASS

Basins are not designed to be installed where saturated soil hydrostatic pressure extends above the top of the pit unless the pressure is relieved by an independent drainage system. Basin cover vent and discharge seals may be rubber insert or bolted on flange design.

CONSULT FACTORY FOR LARGER SIZE BASINS OR SPECIAL APPLICATIONS.

BASIN DIMENSIONS

Available in: Fiber-glass

OUTDOOR BASINS AND ACCESSORIES

Additional basin sizes with options (i.E. Rail studs) are available. Consult factory.

OUTDOOR INDOOR

OUTDOOR BASINS - FIBERGLASS ONLY - NO HOLES DRILLED

All basins include 5 field installed adapta-flex seals - (1) 1-1/4", (1) 1-1/2", (2) 2" and (1) 4" grommets.

OUTDOOR TANK VENTS