EUR
en
Asset ID: 7412 Available: 1 Worthington Split case pump. Model 5LN-22. Size is 8" x 5" - 22" Impeller, epoxy lined. Rated at 1250 gpm at 420 ft TDH. (Requires 250 HP motor 1775 rpm not included). This pump has been rebuilt and was never used after rebuild. Used as a back up fire pump so it is high head. Rebuilt by HydroAire Services job # 6082-12-11-11. Rotation: GREY pump looking at the shaft, rotation is counter clockwise. Note Worthington pumps are now backed by Flowserve. Bare pump only - Grey. Shipping dimensions 48 x 48 x 45" tall, 1350 pounds.
Asset ID: 1945 Available: 1 Vertical sump pump by Pumpworks model 820. New - stored in warehouse as spare. Size 1.5 x 1 -8 with 8" impeller. Material carbon steel, heavy duty configuration. Rated capacity 25 gpm at 58 ft TDH. Pump serial number 18-23305-8-1. Motor is Baldor 2 HP 1755 rpm 230/460v 3/60 TEFC Frame 145TC
Asset ID: X2007 Available: 1 Small positive displacement pump (gear pump probably). Specs unknown. Pump by FFA Pot.
Asset ID: X2012 Available: 1 Viking positive displacement pump. Specs unknown - lste used as pump from Glycerin settler
Asset ID: X2013 Available: 1 Positive displacement pump. Specs unknown - last used as a Stripper feed pump
Asset ID: X2019 Available: 1 Positive displacement pump - probably gear. Specs unknown - last used as Small pump located under glycerin coalescer
Asset ID: X2020 Available: 1 Positive displacement pump, probably Gorman Rupp gear pump. Specs unknown - last used as Larger pump under glycerin coalescer
Asset ID: X2043 Available: 1 Centrifugal condensate pump at condensate receiver. Vertical. Driven by 5HP motor. Specs unknown
Asset ID: X2046 Available: 1 Positive displacement pump. Specs unknown - last used as Settler pump.
Asset ID: X2049 Available: 1 Positive displacement pump. Specs unknown - last used as MRU pump.
Asset ID: X2051 Available: 1 Vertical centrifugal pump. Specs unknown - last used as Scrubber pump.
Asset ID: X2054 Available: 1 Positive displacement pump. Specs unnown - last used as Knockout Pot Pump
Asset ID: X2059 Available: 1 Positive displacement pump. Specs unknown - last used as MRU Bio Cooler South
Asset ID: X2062 Available: 1 Centrifugal pump. Specs unknown - last used as Break Tank Pump
Asset ID: X2065 Available: 1 Positive displacement pump. Specs unknown - last used as HydraSep 1 Pump
Asset ID: X2067 Available: 1 Gorman Rupp positive displaceent pump. Specs unknown - last Used as Hydra Sep 2 Pump
Asset ID: X2071 Available: 1 Positive displacement pump. Specs unknown - last used as VLF Feedpump
Asset ID: X2072 Available: 1 Centrifugal pump. Specs unknown - last used as Precoat Pump
Asset ID: X2074 Available: 1 Centrifugal pump. Specs unknowm - last used as Cold Soak Pump West
Asset ID: X2079 Available: 1 Positve displacement pump. Specs unknown - last used as RDO pump
Asset ID: X2082 Available: 1 Positive displacement pump. Specs unknown - last used as settling tank 1 pump
Asset ID: X2091 Available: 1 Positive dispacement pump. Specs unknown - last used as crude tank pump
Asset ID: X2092 Available: 1 Positive displacement pump. Specs unknown - last used as oil dryer pump
Asset ID: X2104 Available: 1 Goulds centrifugal pump, model 3196. Size 1.5 x 3-8 with 5.5 inch impeller. 3600 rpm. Designed for 92 gpm at 102 ft TDH. Material CD4MCU - stainless steel. Includes pump, motor, coupling, and bedplate
Asset ID: PK-2097 Available: 2 Simflo Vertical 7-stage Multistage pump. Motor is 300 HP, 3565 rpm 460v 3/60 inverter duty. Model SD10C. (New model cross references to SP10L - same pump). Pump designed for 600 gpm at 1245 ft TDH. Includes MCC with VFD drives and the portable building the MCC is in. Package Includes: - Two (2) Simflo (Simmons) Vertical pumps Model SD10C (SP10L is new model # but same pump) 7-Stage, 600 gpm at 1245 ft/head, 300 HP Bowl dia 10.19", BEP head 158 ft per stage - MCC Portable Building - MCC 4000A Cutler-Hammer Advantage Series 2100 480 V 3 Phase 3-wire 60 Hz 3200 A Sect.1-2 800 amp Sect.3-5 1200 amp w/ 4000 amp Main and Breakers for each VFD/pump and includes spare breaker - Starters installed in MCC (2) Allen-Bradley VFD's - CAT # 1336E-BP350-AN-CM-EN AC Input: 300-378 KVA 380-480 V 455 amps 50/60 Hz 3 Phase AC Output: 366 KVA 0-460 V 459.2 amps 0-400 Hz 3 Phase - Allen Bradley PanelView 1000 plc controls This pump package is used. It was in good working order when idled and removed in late 2023. Units are removed and ready to load.
Asset ID: 7139A Available: 1 Viking positive displacement pump. Model LL4124A, ser no. 11297045 . Size 3 x 3, LL4124A - pump is rated up to 140 gpm. Includes pump, gearbox ratio 3.705 (IN 1750 / OUT 472 rpm), baseplate - no motor (was sized for 30HP motor at 1750 rpm missing). Used - will need reconditioning; it has sat idle for quite a while. Price includes loading on your truck.
Asset ID: S3210 Available: 1 PIAB air driven vacuum ejector. Model M125D, series 21.01.010. Vacuum gauge can be placed on either side. Cross references to PIAB model M50B5-EN . Very little use, in original box
Asset ID: X3146 Available: 2 Tru20 Vertical multistage stainless steel pumps. Model OVIMF32-20. Stainless steel CF8. 10 HP motor. Sized for 175 gpm at 140 ft TDH. Quantity (2), priced separately.
Asset ID: X3153 Available: 1 Hydraulic power pack with two 30 HP pumps and reservoir. Hydraulic pump is Continental Hydraulics, Model PVX-15B30-RF-P-1S17-B. Max pressure 3000 psi
Asset ID: X3203 Available: 1 Centrifugal pump. Use: For above tank
Asset ID: X3208 Available: 1 Positive displacement pump
Asset ID: X3209 Available: 1 Positive displacement pump
Asset ID: X3242 Available: 1 Positive displacement pump
Asset ID: X3243 Available: 1 Centrifugal Pump
Asset ID: X3248 Available: 1 Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3249 Available: 1 Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3250 Available: 1 Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3251 Available: 1 Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3252 Available: 1 Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3253 Available: 1 Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3254 Available: 1 Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3257 Available: 1 Positive displacements - priced or the LOT of 4
Asset ID: X3396 Available: 1 Centrifugal pump with motor on baseplate
Asset ID: X3405 Available: 1 Multi stage vertical pump with motor
Asset ID: X3525 Available: 1 (2) Goulds vertical multistage pumps. Model 66SV21GL4F60 with 20 HP motor. ESV 4X4X5-2P-PM
Asset ID: V2206 Available: 1 Vacubrand 4C vacuum pump, Model MD 4C NT. Thee-stage diaphragm pump rated at 2.2 cfm and max vacuum 1.1 torr. Has 4 heads, 3 stages
Asset ID: V2225 Available: 1 AMT self priming cast iron centrifugal pump Model 2876-96. Pump 3 1/4 x 3 1/4 AMT pump with 7.5 HP motor. Lot 114. See pump curve - approx 250 gpm at 60 ft TDH
Asset ID: V2230 Available: 1 Flex Pro peristaltic metering pump A2F series. Max feed 14.3 GPH and 50 psi, 3/8 inch OD tubing 115v. Serial # 000908938-180716
Asset ID: V2231 Available: 1 AMT centrifugal pump 429K-X8 self priming driven by 1 3/4 HP motor. Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use in hazardous liquids. These 1" pumps are fitted with FKM mechanical seal and O-ring. Self-priming to 6 feet. Type 6 seal.
Asset ID: V2232 Available: 1 Silverson inline high shear mixer - Like NEW Silverson model 275LS B1759 stainless steel, Inline mixer/emulsifier. Sanitary connections. Driven by 2HP motor. This high shear pump is Like New - used for about 20 hours.
Asset ID: V2233 Available: 4 AMT centrifugal pump 429K-X8 driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. Qty(4) - priced separately
Asset ID: V2249 Available: 1 AMT self priming centrifugal pump model 2876-95. Approx capacity 250 gpm at 60 ft TDH. Driven by 7.5 HP motor 3525 rpm 460/3/60
Asset ID: V2250 Available: 6 AMT self priming centrifugal pump model 2875-95. Driven by 5 HP motor 3525 rpm 460/3/60. Approx capacity 250 gpm at 60 ft TDH. Quantity (6), priced separately
Asset ID: V2262 Available: 1 AMT self priming centrifugal pump model 2875-95 driven by 5 HP motor 3550 rpm 480/3/60. Rate approx 250 gpm. See pump brochure
Asset ID: V2263 Available: 1 AMT centrifugal pump model 429K-X8 stainless steel driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use in hazardous liquids. These 1" pumps are fitted with FKM mechanical seal and O-ring. Self-priming to 6 feet. Type 6 seal
Asset ID: V2269 Available: 1 Self Priming Centrifugal Pump with motor
Asset ID: V2268 Available: 1 Cast iron self priming pump with motor
Asset ID: V2270 Available: 1 AMT centrifugal pump model 429K-X8 stainless steel driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use in hazardous liquids. These 1" pumps are fitted with FKM mechanical seal and O-ring. Self-priming to 6 feet. Type 6 seal
Asset ID: P-207A Available: 1 DXP Cat Pump 1DXM7562T, 10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last used as PW HP Feed pump
Asset ID: AF16 Available: 1 PC-31 Slurry Stock. Verderflex peristaltic pump by Verder. Model VF65, serial 43260E6. Driven by gearmotor Baldor 10Hp at 1760 rpm inverter duty. Gearbox ratio 38.4:1. Material cast iron body/cast iron rotor. Size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev. Flow capacity controlled by VDF and ranges from approx. 60 gpm at 75 psig to 90 gpm at 10 psig. Maximum solids content 16.25mm compressible. Maximum lift is 9.5 mWc (meters water column)
Asset ID: BD-1511 Available: 1 Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004312,20 gpm, 160 Ft. Hd., Driven by 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD motor. Last used as Pump from BD Dryer
Asset ID: P-705A Available: 1 Pump 264 GPM, 138 Ft., 22.8 HP, 3600 RPM, 31 FLA
Asset ID: XL95 Available: 1 Lot of Positive Displacment Pumps (5). For photos see LOT 95
Asset ID: P-201 Available: 1 Teikoku Canned Motor Pump F60-3211N4BL-0204F1-AV, s/n 2014004324, 22 GPM, 103 Ft, 5.3 HP, 3600 RPM, 8 Fla. Last used as Filtered FD Feed Pump
Asset ID: P801 Available: 1 Teikoku Feedpump F64-215C4BM-0405S1V-AV, S/N CV-4637-2
Asset ID: P-1005A Available: 1 Centrifugal Pump CPT31-6 Sulzer 100133882 8x6x13, 120 ft Head, 1500 USGPM, 1770 RPM Driven by 75 HP, 1770 RPM, 60 Hz Motor. Last used as Cooling Tower Pump
Asset ID: X4001 Available: 2 NEW Goulds 22SV9GE30N e-SV Stainless Steel Series Vertical Multi-Stage Pump. CI-304 Configuration with 2" Connections. Bare pump only. Material ss304, Viton Standard Shaft Seal, 9 Stages, 116 GPM Nominal Flow, Low NPSH model. A Xylem Brand Product. Quantity (2) - priced separately.
Asset ID: P-502 Available: 1 Teikoku Feed pump F60-3211N4BL-0204SF1-AV, S/N 2014004326, 15 gpm, 166 Ft. Hd, Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase, with VFD motor. Last used as ME Dryer Feed pump
Asset ID: P304 Available: 1 Teikoku F60-3211N4BL-0204SF1-AV, S/N 2015004881 Pump 20 GPM, 92 Ft, 5.3 HP, 3600 RPM, 8.0 FLA
Asset ID: 8576 Available: 4 Sanitary pump with explosion proof motor. Turbine pump for negative NPSH pressure to negative pressure 0.09 Mpa. Pump rated at 1 MT/hr at 30 m head (4.6 gpm at 98.4 ft TDH). Pump inlet/outlet 51mm/38mm. All stainless steel 316L. Motor is 2.2 KW (3 HP) at 3410 rpm 460v 3/60. Quantity (4) - priced separately
Asset ID: 7139B Available: 1 Durco centrifugal pump. Size 2K 3x1.5-10/96. Serial 405665. Includes 50HP Marathon electric motor @ 3515 RPM. 230/460V, 116/80A. Used - will need reconditioning
Asset ID: P-402A Available: 1 CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as Methyl Ester HP Feed Pump.
Asset ID: P-B100 Available: 1 Sulzer Pump CPT 21-3, No 100132829, 2725 RPM. Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as B100 Loading Station Pump
Asset ID: P-111A Available: 1 Busch vacuum pump 3.0 HP, 460 volts, 60 Hz, 3 phase. Last used as FD Filter Vacuum System
Asset ID: P-703 Available: 1 Teikoku feed pump 15 GPM, 180 ft. hd., driven by 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Feed pump
Asset ID: 380-PU-872 Available: 1 Recirculation pump. 4350 GPM @ 65TDH, Alloy D20, Durco Mark III Centrifugal pump, Size 3K10x8-16H/160RV. Designed for capacity 4950 gallons at 65 ft TDH. Skid mounted. Inlet 10 inch/outlet 8 inch. Driven by 125 HP motor 460v/1200 rpm
Asset ID: P116 Available: 1 Busch Vacuum pump LB0063A AMB XX IX,4 GPM, Driven by 7.5 HP, 1800 RPM, 38 ACFM 5.5 FLA, 28.9 in HG. Last used as FD Dryer Vacuum Pump
Asset ID: P-102 Available: 1 Teikoku 22 GPM, 155 Ft, 10 HP, 3600 RPM, 14.5 FLA. SN 4014004318 Last used as FD Dryer Feed pump.
Asset ID: P-4300D Available: 1 Vertical turbine cooling tower pump. 3 stage design. Bowls are 14" dia, 10" pipe, 114" OAL. With 150 HP US Electric Motor. 460V, 167A, 60Hz, 1785 RPM. Built 2003
Asset ID: P-508 Available: 1 Teikoku F60-3215N4BL-0204SF1-AV, S/N 2014004320 pump, 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Post E Dryer Flash Vessel Drain pump
Asset ID: P-807 Available: 1 Teikoku Feed pump 150 GPM, Driven by 1HP, 460 volts, 60 Hz, 3 Phase. Last used as Feed pump
Asset ID: P-203 Available: 1 DXP Cat Pump 1DXM75627,10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last used as FD HP Feed Pump
Asset ID: P-706 Available: 1 Teikoku F41-215U4L-02045S1-AV, S/N FG-1379A Pump 13.2 GPM, 29.3 Ft. Hd, Driven by 2.3 HP, 3600 RPM, 3.7 FLA motor
Asset ID: P-8622 Available: 1 Vacuum pump by Gardner Denver Nash, Model 44SX010V5K000, 1750 max RPM, Driven by 3 HP, 17670 RPM, 60 Hz motor. Last used as Flash Dryer Vacuum Pump
Asset ID: P-214 Available: 1 Viking Positive displacement pump 10.3 GPM, 218.8 Ft, 3 HP, 28 ft Net positive suction head, suction pressure 25.4 psi. Last used as Sweet water drain pump
Asset ID: 7628 Available: 1 Flowserve positive displacement rotary gear pump, Model 1.5GRM. Suction/Discharge 1-1/2" Shaft size 7/8". Last used for High pressure pump for votator, Flows to 1200 gpm at 500 psi. GR pumps provide high efficiency, pulse-free pumping, Ser no. 1162803CHP001A. Driven by Baldor 15 HP 230/460v 3/60 at 1160 RPM.
Asset ID: P305 Available: 1 Flowserve Innomag Feed pump 10 HP, 460 volts, 60 Hz, 3 phase with VFD. 1.5x1x8 inches. BM69011100-BCO, Serial 69400, 6.9 inch imp. Diameter. Last used as Methanol Daty Tank Feed Pump
Asset ID: 7137G Available: 1 Centrifugal pump with Baldor Super-E Cat. No EM3771T, Spec 07H02W279, Frame 215T, 10 TE HP, sn F999, Volts 230/46, 23.8/11.9 Amps, 3525 RPM, 60 Hz, 3 phase
Asset ID: 6574 Available: 1 Aurora Pump 8" split case centrifugal water pump. No. 91-10426, Type 411 SF. Size 8x8x11B. 2000 GPM. 120 Ft. head. 1750 RPM. Powered by a 75 HP General Electric motor. Model 5K365BL21502, S/N R66141250. 1780 RPM. 230/460V, 3 Ph., 60Hz, 175/88A.
Asset ID: P-107 Available: 1 Teikoku canned motor pump 7 GPM, 148 ft. hd.F41-217U4L-0204S1-AV, S/N FG-1378A, 36.4 GPM, 148 Ft,3.1 HP, 3450, RPM, 7.5 Fla
Asset ID: P-404 Available: 1 Teikoku F60-3115N4BL-02045G1-AV, S/N 2014004327 Pump 20 GPM, 92.4 Ft, 3.3 HP, 3600 RPM, 5.5 FLA
Asset ID: 5993 Available: 1 Stainless Steel close coupled sanitary centrifugal pump. Waukesha S-line Model C218. 2 x 1 1/2 - 8. Max capacity 217 gpm @ 42 ft head. Gator Motor is 5 HP, 1765 rpm 460v 3/60. All wetted parts are stainless 316L. Open impeller design for easy cleaning, CIP capability.
Asset ID: P-1005B Available: 1 Centrifugal Pump CPT31-6 Sulzer 10013390, 1500 GPM, 120 Ft Hd. Driven by 75 HP, 1800RPM, 460 volts, 60 Hz, motor. Last used as Dow X Water Pump
Asset ID: 7139I Available: 1 Bare pump - Viking Pump Model LQ4124R, Serial No. 1702284, Size is 2.5" inlet x 2.5" outlet, cast iron body with mechanical seal. Includes integral relief valve in head, Has gear unit. Nominal flow of 135 gpm,. Approx 125 gpm. Designed to be driven by 10HP motor but motor is not included
Asset ID: P-505 Available: 1 Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004319,20 gpm, 160 Ft. Hd., Driven by 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD motor. Last used as ME Dryer Drain pump
Asset ID: P120 Available: 1 Pump 41 GPM, 92 Ft, 4.6 HP, 3500 RPM, 7.5 Fla, Last used as Biodist. Feed Pump
Asset ID: P-709 Available: 1 Teikoku Reflex pump 25 GPM, 169 ft. Hd., F60-3315N4BL-0204TF1-AV, S/N 2014004322, 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Reflex pump
Asset ID: BD-1507 Available: 1 Biodiesel loadout pump
Asset ID: 2031 Available: 1 Nikkiso non-seal pump (sealless). This pump is new unused. still in original crate. Also called canned-motor pumps. Leak free pump best suited for use with chemical industry for metering critical chemicals/fluids. Nikkiso Non-Seal Pump Model HX22C-5 Item No 3027-1200-7, Designed for 30 gpm at 129.7 Ft TDH. Output 4.96 HP 460v 3/60 3600 RPM. Ready to load
Asset ID: P-509 Available: 1 Teikoku 3.3 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as PW Feed pump
Asset ID: AF15 Available: 1 Verderflex peristaltic pump by Verder. Model VF65 FCNBSS/S, serial 43260B6. Driven by gearmotor SEW 7.5 KW (10HP) at 1775 rpm inverter duty. Material cast iron body/cast iron rotor. Physical size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev. Flow capacity controlled by VFD and ranges from approx. 60 gpm at 75 psig to 90 gpm at 10 psig. Maximum solids content 16.25mm compressible. Maximum lift is 9.5 mWc (meters water column)
Asset ID: P-112 Available: 1 Sulzer Centrifugal pump CPT-23-1B, S/N 100131147, 40 GPM, 120 Ft. Hd. Driven by 7.5 HP, 4
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.