metal slurry pump cost

Stanley Submersible Trash Pump w/3in. Discharge (Excludes Hose Whips - Includes Couplers)

Application:

Dewatering, Dredging, Cleaning

Features:

Submersible and Self Priming, Dredges solids up to 3 inches in size, Removes sand, clay and mud from work structures, 450 gpm (1688 lpm) discharge, Easy bowl inspection and clean out, Built in reverse flow check, Can run dry without damage, 3 in. discharge, CE Certified

Specifications:

Capacity: 3 in. NPTF with 3 in. Camlock, Performance: 450 gpm / 1688 lpm, Flow Range: 7-9 gpm / 26-34 lpm, Working Pressure: 2000 psi / 140 bar, Full Relief Setting: 2250 psi / 155 bar, Weight: 31 lbs / 14 kg, Length: 14 in. / 35.5 cm, Width: 12 in. / 30.4 cm, Hydraulic Ports: -8 SAE O-ring, Connection: 3/8 in. Male Pipe Adapter, Couplers: Yes, Hose Whips: No

Features

Lightweight and durable urethane bowl and impeller, Submersible, no priming required, Able to run dry without damage, Lifting eye, HTMA quick disconnect couplers, 3 in. discharge.

Specifications

Model: TP03, Capacity: 3 in. discharge, Performance (gpm): 450 gpm, Performance (lpm): 1688 lpm, Flow Range (gpm): 7–10 gpm, Flow Range (lpm): 26–34 lpm, Pressure (psi): 2000 psi, Pressure (bar): 140 bar, Ports: -12 and -14 SAE O-Ring, Weight (lbs.): 31 lbs., Weight (kg): 14 kg, Length (in.): 14 in., Length (cm): 35.5 cm, Connection: HTMA flush faced couplers, Discharge Connection: 3 in. female pipe thread

The Stanley TP03 Submersible Trash Pump boasts 450 gpm of output flow, this pump is an efficient way to move large volumes of liquid with concentrations of solids up to 25% by volume. The TP03 handles solids up to 3 inches in size and is used for dredging and light cleaning tasks. The urethane bowl and impeller is abrasion resistant, resilient and impervious to petrochemical solvents. No priming necessary, just drop it into the material and it’s ready for work.

The urethane bowl is virtually indestructible - tough, lightweight, abrasion resistant, resilient and impervious to petrochemical solvents. The Stanley TP03 can pump almost anything without damaging the bowl.

The Stanley TP03 Submersible Trash Pump’s efficient design places the urethane impeller above material flow, reducing blockage, jamming and overall pump wear while keeping liquids moving fast enough to pump high volumes of solids at a much higher head than non-submersible pumps.

For easy maintenance and inspection, simply remove the wing nuts and top plate, clean out the bowl and replace the cover and nuts. You’re back to work in less than 5 minutes. The TP03 can run dry without damaging motor or impeller, reducing the possibility of downtime.

Note:In an effort to improve portability and ease of use, modifications have been made to all TP03 and TP08 model trash pumps. For both pumps a quick link clip (p/n 73577) and carrying handle (p/n 73576) were added and connected to the eyelet located on the top plate. The rounded handle allows for increased comfort while carrying when compared to the previous square handle. With the clip feature, the handle can be removed to allow for large crane hooks to attach to the eyelet. In addition, the color of the TP03 urethane bowl has been changed from black to yellow. This change was made to increase pump visibility while operating in murkier substances or liquids.

The STANLEY® TP03 Trash Pump is the lightest, most efficient solution for moving large volumes of liquid with up to 25% solid content. No priming is needed—just drop it in, and it's ready to work. Featuring a virtually indestructible urethane bowl, it is tough, abrasion-resistant, resilient, and impervious to petrochemical solvents, allowing it to pump a wide range of materials without damage. Its durability and ease of use make it an ideal choice for demanding tasks.