EUR
en
Dredge Overview For Charter. Trailing Suction Hopper Dredge (TSHD) with a hopper capacity of 2,306 m³. General Year Built: 1995 / Germany Type: TSHD Hull Material: Steel Class: RMRS Class Notation: KM★R1 AUT1 Hopper dredger Dimensions Length Overall: 99,83 m Width: 17,70 m Gross Tonnage: 3785 tons Characteristics Sailing speed loaded: 10 knots Max. draught…
Dredge Overview 2017 Royal IHC Beaver® 45 Cutter Suction Dredger (CSD) for sale. Designed for high-efficiency, consistent dredging of sand, silt, clay and gravel mixtures. This dredge model is reliable, fuel efficient and has a low maintenance cost. Equipped with state-of-the art technology, including: low cost per cubic meter, an exceptional rate of pumping power,…
Dredge Info 12″ Electric Cutter Section Dredge for sale (Very Motivated Seller). Dredge is located in Arkansas. The dredge was purchased at auction in 2024 and has been sitting since then. It was in operating condition at that point in time. Seller is unsure on make, model, age, or hours. Commonly used in dredging operations…
Dredge Overview This 2020 Mud Cat MC275D has approximately 6,300 hours of operation and features a one-truck transportable dredging system equipped with both a cable drive system and a heavy-duty dual marine prop drive system for self-propelled dredging. It has a 25 ft max dredging depth, and a nominal capacity of 3,000 GPM (681 m³/hr)…
Dredge Overview IHC Beaver 50 Cutter Suction Dredger for sale. Year Built & Place: 2014 / The Netherlands Vessel Type: CSD Flag: Saudi Class: RINA GRT: 300 tons Dimensions length overall: 32.3 m Length over pontoons: 21.65m Breadth: 7.87m Side Pontoons: 19.00 x 2.40 x 2.44 m Mean Draught with full bunkers: 1.45m Dredge Characteristics…
Dredge Info For sale, Trailing Suction Hopper Dredger (TSHD) with a capacity of 7,047 cbm. Operating water depth of 9-27m, with wind speeds below 13.8m/sec. Wave level below 5, and swell wave level below 3, suitable for operations with wave height below 2m. Unable to operate during typhoons or severe weather conditions with strong winds…
Dredge Overview Dragflow HY400B dredger for sale. The HY400 is an hydraulic pump with high abrasion resistance and can handle material concentrations up to 70%. Ideal applications include mining, industrial and dredging operations. Dredger Information Excellent condition The main refueler pump has been completely overhauled at the official Dragflow service department Central hydraulic unit REXTROT…
Dredge Info DSC Barracuda Swinging Ladder Dredge for sale. Built in 1990 (Dredging Supply Company). Although the dredge can be used in conventional configuration, it has always been used in Swinging Ladder Mode. 95% of all works were performed in fresh water in the Piedmont Carolinas. She has been maintained and serviced regularly with upgrade…
Dredge Overview DSC Moray Total Dredge Package, 8×8 Swinging Ladder or Conventional Dredge. Built in 2009. Included Items 2009 DSC Moray 8×8 Swinging Ladder or Conventional Dredge 8,000 engine hours 8×8 Booster Pump CAT 3306 300hp Metso 8×8 H24HD dredge pump Twin Disc PTO 88 hp single crew Truckable Tug 1,820′ of 8″ SDR 17…
Dredge Info 1990 Ellicott 370 Dragon Series Cutter Suction Dredge for sale. It currently has 8,500 operating hours from 2019 to the present. Suction pump is nearly new Entire flotation has recently been replaced Motor has been recently overhauled Includes 500 meters of discharge pipe The dredge is in good working order, as the suction…
Dredge Overview VMI MDE-615 8-Inch Cutter head dredge built in 2007 and in excellent condition. Has ICS controller. This dredge is a cable-driven cutter suction dredge, that’s easily transportable. Dredging applications include marinas, lakes, ponds, and lagoons. Features include a full-width cutterhead and recessed impeller pump for efficient sediment removal. Additional pictures available here: 251105-DH…
Dredge Info For sale, TSHD / Aggregates Carrier, located in the Netherlands. Accommodations refurbished / upgraded in 2022. Vessel Overview Type: TSHD Year Built: 1986 (Appledore Ferguson Shipbuilders) Flag: British Location: Netherlands Class Society and Notation: Bureau Veritas class due 11.2026, last dd 3.2024 incl hull and af. 6.300 TDW on draft loaded 6.7 m…
Dredger Overview Suction dredger for sale in Spain. Refurbished in 2013. More than 90% of the original vessel has been renewed in different phases. In 2022-2023 current owners changed a lot of steel plates, 50% of the hopper floor. A new dismountable deck cover was added, new dredging circuit, new hydraulic engine for the pump…
Dredge Overview New cutter suction dredger CSD250 type, built in 2024. The dredger has been used for silt. The weight is about 32 tonnes and can easily be lifted on deck on a RAL container vessel. She has about 1200 running hours. Also has 800 m of HPDE hose, 100 m of rubber hose, and…
Dredge Overview DSC Moray Class 8″ Submerged Pump Swinging Ladder Dredge available for sale. A 2022 survey has the dredge in good condition with good coatings. Vessel length: 42 ft. Vessel width: 11 ft. Dredging Depth: 17.5 ft. (5.3 m) Dredge Ladder: 20 ft. Discharge: 203.2 mm (8″) Power: 275 hp (205 kW) Cutter Power:…
Dredge Overview This 16×12 Cutter suction dredger (CSD) is reliable, fuel efficient and has low maintenance costs. This robust and highly productive dredger is equipped with state-of-the art technology. Built in Estonia, possibility of delivery to other regions and training there by the yard specialists. Price available upon request. Location: Estonia Key features include: low…
Dredge Overview Built in 2009 and purchased new in 2011. Highly portable swing ladder designed to work in narrow channels and small projects. One truck transportable. Maximum dredging depth of 15 ft. and min depth of 2 ft. 4 in. Powered by a 375 hp John Deere Model 9.0L 6090HF070 Turbocharged Diesel Engine. Cutter has…
Dredge Info 450 mm (18″) IHC Beaver King Cutter Suction Dredger, Built in 1974 in Holland now available for sale. Dredge Overview & Features: Location: Iceland Manufacturer: IHC Year Built: 1974 Rebuilt: 1976 and 1988 Maintenance-work and classification inspection: 2007-2008 Icelandic Maritime Administration certificate: to 3.3.2009 Dimensions: 21,5×7,08×1,8 m Draft loaded: 1 m Suction depth…
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.