slurry pump casing ammo

Little Giant - 6EN Series - Sump Effluent Pumps

Little Giant 6EN Series (6EN-CIM, 6EN-CIA) Sump Effluent Pumps

1-1/2 FNPT Outlet, 50 GPM, 1/3 HP, 115 or 230 Volts, For Basement Sumps, Dewatering and Water Transfers, Fully Submersible

Little Giant - 6EN Series (6EN-CIM, 6EN-CIA) - Sump Effluent Pumps

The Little Giant 6EN series pumps feature 1/3 HP permanent split capacitor (PSC) motors providing lower current draw, energy efficiency, improved performance and cooler-running for durability. Built on the industry's best 6E platform, the 1/3 HP 6EN series consumes only 6.0 amps while producing 50 gpm @ 5 ft of head and reaching a maximum shut off of 22 ft. The new unit also includes a stainless steel plate on the volute as a debris filter, creating lower intake velocities and pump stability.

Stop! Required before ordering:

Unless specified above, all pumps are for water use only and are not to be used for any other purpose.

If you are selecting a pump that is designed for pumping products other than water, please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.

Warranty is subject to the proper selection of material and seals of the product you are pumping.

• Applications: continuous duty use in dewatering and light effluent applications
• 1/3 HP PSC motors with thermal overload protection
• Energy saving low amp draw
• Cooler running motor which extends the life of the pump
• Cast iron pump housing with protective epoxy coating for corrosion and rust resistance, polypropylene base
• Stainless steel screws, bolts and handle
• Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces)
• Upper and lower sintered sleeve bearings
• Vortex impeller
• 1 1/2 in. FNPT discharge
• Handles liquid and solid waste materials up to 1/2 in. diameter
• Available in manual or automatic operation with two switch options Integral snap action float switch: on level 7 in. - 10 in. off level 2 in.- 5 in. or Piggyback mechanical float switch: on level 12 in. - 14 in. off level 5 in.- 7 in.
• cCSAus Listed
• Two year warranty
• Fully submersible

• Cover - Polycarbonate
• Motor Housing - Epoxy-coated cast iron
• Impeller Material - Nylon
• Impeller Type - Vortex
• Volute - Epoxy-coated cast iron/propylene
• Power Cord - SJTW (506612 with SJTOW)
• Mechanical Shaft Seal - Nitrile with carbon & ceramic faces
• Fasteners - Stainless steel
• Shaft - Cold rolled steel
• Bearings - Upper and lower sintered sleeve bearings