twin casing slurry pump 600 hp

Little Giant 506600 50 GPM Automatic Submersible High Temperature Effluent Pump

Details

This high temperature version of the 6E Sump/Effluent Pump is capable of pumping heated liquid up to 200°F liquid. Uses include boiler blow-down sump pits, rendering plant wash-down sump pits, public utility underground transformer vaults, industrial steam cleaning sump pits, etc. These pumps handle liquids and solid waste materials up to 1/2" in diameter. Pumps feature a 1-1/2" discharge, with a lift of 20'. Cast iron housing and volute with protective epoxy coating, high-temperature thermoplastic base and vortex nylon impeller.

Handles liquids up to 200° F 1/2" solids handling capability Cast iron pump housing with protective epoxy coating for corrosion resistance Oil-filled motor housing for lifetime lubrication and rapid heat dissipation Integral mechanical float switch Stainless steel screws, bolts and lifting ring to protect against corrosion Mechanical seals (stainless steel spring, Carbon and Ni-Resist faces) to assure maximum protection against pump failure Bearings: Upper and lower sintered sleeve bearings for extended motor life Thermal overload protection Automatic operation has 10" to 12" "On" level range

Dimensions and Measurements

Cord Length 15 in. Depth 8.7 in. Discharge Diameter 1.5 in. Flow Rate by Feet of Head 42 gal / 10 ft, 50 gal / 5 ft, 27 gal / 15 ft Height 10.9 in. Length 8.8 in. Maximum Diameter Solids 0.5 in. Maximum Head Height 20 in. Minimum Head Height 5 in. Product Weight 32 lbs. Shut Off Height 20 in. Shut Off Pressure 8.7 Water Connection 1-1/2" Water Pressure (Max)8.7 PSI Width 8.5 in.

Characteristics and Features

Automatic Yes Configuration Sump / Effluent Pump Impeller Material Nylon Material Cast Iron Material Casing Iron Material Housing Iron Shutoff Head in Feet 20 Submersible Yes Switch Type Mechanical Float Water Connection Type NPT

Electrical and Operational Information

Amperage 10.1 Electrical Phases 1 Frequency 60 Hertz Horsepower 0.33, 0.34 Maximum Fluid Temperature 200°F Voltage 115 Wattage 735

Warranty and Product Information

Approved for Commercial Use Yes Certifications CSA