EUR
en
Built in 2018 at Dragflow in Italy. Hydraulic motor. Pump has been used for only 300 hours. Suitable for bentonite water, slurry water, sand-water, salt sand water, etc. Location: Netherlands General Information Built: 2018 / Italy Working Hours: 300 hr Principal Dimensions and Characteristics Weight: 885 kgs…
Built in 1997 and completely renovated in 2019, and both engines were replaced by two new ones. The split hopper barge has a hold capacity of 400m3 (523 yd3). It is powered by 2 Diesel Volvo Penta engines with 630 hp. It has 2 Azimuthal Columns Aquamaster Rauma thrusters. The barge has a GT of…
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
This DSC dredge was rebuilt in 2018 (built 1997) and has new controls switches and wiring new paint and a new seat. The CAT 3116 was overhauled as well, injection pump rebuilt alternator and starter inspected and tested. All functions were tested on land before going to storage. Minimum dredging depth is 3-ft and maximum…
4,000-feet available – 12-inch SDR 17 HDPE Pipe. Mostly in 50-ft sections. The pipe was used for a few dredging projects over a few months pumping mud/clay/water slurries. SOLD Location: State of California, USA Principal Dimensions and Characteristics Material High Density Polyurethane Pipe OD (Nominal) 12-inches 304.8 mm Pipe ID (Nominal) 12.75-inches 323.6 mm Wall…
Built in 1966 in Germany, the barge was rebuilt in 1980. Self propelled crane barge has a new class for European inland water. The crane is a Demag 410 hoisting/dredging crane. On the stern deck, there is a 16 tons A-frame for 16 tons hydraulic hoisting. The barge is powered by 2 Daimler Benz Germany…
Components for a four-point anchoring system. Barge not included. Package includes winches, hydraulic power units, interconnecting line packages, vertical fairleads, anchors and buoys. 1) Quantity Four (4) ACE 30 Heavy Ton Winches. 2) Quantity Two (2) ACE 89 kW Hydraulic Power Units, Open Loop Diesel 3) Quantity Four (4) ACE Interconnecting Hydraulic Line Packages 4) 5…
2 miles of 12-inch SDR 17 HDPE Pipe in 50-ft sections. Used for fresh water transfer. Pipe is reported to be in excellent reusable condition. Location: state of Tennessee, USA Principal Dimensions and Characteristics Material High Density Polyethylene Pipe OD (Nominal) 12-inches 304.8 mm Pipe ID (Nominal) 12.74-inches 323.6 mm Wall Thickness (Nominal) 0.75-inches 19.05…
This 20-inch Cutter Suction dredger, IHC Beaver 1600 was built in Holland in 2000. The IHC Beaver is well known for its robust construction, reliable operation and excellent performance. Among the salient features of the vessel are the compact dredge pump drive incorporating a reduction gearing with integrated pump bearing, and a fresh water engine…
This 6-inch Horizontal Cutter Dredger was built in 2012, and has 1966 total runtime hours on it. It worked on one job-site for it’s entire life. The dredger is in great working condition and has no leaks, and no mechanical issues. It is ideal for sediment removal from small bodies of water such as (for…
This 20-inch SDR 11 HDPE Pipe is new surplus and is in very good condition. 1,000 feet Available Location: Tennessee Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 508 mm 20 inches Pipe ID (Nominal) 410.11 mm 16.146 inches Wall Thickness (Nominal) 46.18 mm 1.818 inches Weight…
5,000-feet of 10-inch SDR 17 Pipe. 46-Sets of Pipe Floats Location: State of Georgia, USA Price for Pipe Floats: USD $250.00 per set Principal Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 10.75-inches 273.05-mm Pipe ID (Nominal) 9.410-inches 239-mm Wall Thickness (Nominal) 0.632-inches…
This large Cutter Suction Dredger was built in China in 2007. It is is Indian flagged, and classed IRS (International Registry of Shipping). Total Installed Power is 5,866 kW (7,866 hp). It is currently in use and working in India. Location: Western India Dimensions and Characteristics Length Over All 73.2 m 240-feet Length…
This 1,604 hp Twin Screw Tug was built in 1988 in the USSR and its Classification Society is RMRS (Russian Maritime Register of Shipping), KM*L1 R2RSN AUT2 Tug. It was last Dry Docked in June, 2013 and the next is due in December, 2016 and the next Special Survey is due in November, 2019. Flag:…
This dredge pipe is straight and undamaged with minimal weld joints and almost no wear. Quantity Available: 16,000-feet in 40 to 50-foot lengths.. Location: State of Colorado, USA Principal Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 10.75-inches 273 mm Pipe ID (Nominal) 8.219-inches…
This 10-inch Cutter Suction Dredger (CSD) Ellicott 370-26 has a simple design making it an ideal dredge for first-time owners. It is very easy to train on and operate and is easily portable by truck. The dredger has high durability and easy maintenance. The control system, engine, and mechanical components are specially selected for use…
This 30 m Deck Barge w/ 2.7 Tonne/m2 deck rating was built in 2015. Such barges are often used for transportation on the lakes and rivers of Africa, as well as for mining deck barges. The design as well as the construction will be inspected and certified in accordance to the relevant rules by SAMSA…
This 90-tonne Self Propelled Crane Barge was built in 1982 in Japan and was reclassed in2012 in Thailand and was modernized in 2015 in Russia. Its Classification Society and Notation is RMRS (Russian Maritime Register of Shipping), (KM) R2 Crane Ship. Its last Dry Docking was in November, 2015, the next Dry Docking is due…
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.