EUR
en
Also referred to as packaged pump skids, nearly all industrial pumps are sold as skid systems. A skid package includes the pump itself (typically a centrifugal pump) and a driver (such as an electric motor or a diesel engine) that is mounted upon a steel base.
For the most part, skid systems are assembled by the manufacturer themselves, though sometimes pump suppliers will purchase the components separately and assemble the skid instead.
Nearly all industrial pumps are sold as skid systems, which includes all major components required for its application.
Common components included in pump skid packages include the centrifugal pump itself, filtration systems, pressure gauges, control systems, pipes, and valves.
Industries that most commonly utilize pump skid systems include the oil and gas, pharmaceutical, petrochemical, food and beverage, water and wastewater, chemical, pulp and paper, brewing, and agricultural industries.
It is typically more cost-effective to purchase an entire skid-mounted system than to purchase each component separately and have it assembled in-house.
C&B Equipment is a regional manufacturer of industrial pump skids and other types of industrial equipment.
The following components can be commonly found in industrial pump systems.
pumps
filters
pressure gauges
control systems
piping
valves
The type of centrifugal pump used in each skid system depends on the application it is being used for. Depending on the skid, the system can have just one pump or multiple pumps.
Typically, air-cooled centrifugal pumps are used for applications that are 660 degrees Fahrenheit or less. Water-cooled pumps are used for temperatures greater than that but typically don’t exceed 750 degrees Fahrenheit.
Filters are used to prevent debris and particles from entering into the pump and causing it to back up. Ideally, these filters should be designed in such a way that they are able to catch these unwanted particles without restricting the flow of fluids.
It is recommended that they either be replaced (or taken out and cleaned, depending on the design of the skid) to prevent excessive backpressure.
Pump skids are typically outfitted with pressure gauges to, well, gauge the pressure of the pump. It is important to monitor the pressure of both the inlet and outlet to ensure that both remain in their sweet spots. The inlet’s pressure gauge measures suction, whereas the outlet’s measures discharge.
Pump skids should feature some type of mechanical or electrical control system, and this often comes in the form of some kind of control panel.
These control panels usually feature switches that allow the user to select a specific pump, on/off switches, motor starters, and indicator lights. For outdoor pumps, it is important that these controls are made to be weatherproof.
The skid-mounted piping is what the fluid flows through when pressure is applied by the centrifugal pump itself.
Piping is connected to both the inlet and outlet sides of the pump, and these pipes are usually independently supported so as to not put too much stress on the pump itself.
Depending on the nature of the application, these pipes may need to be insulated in order to withstand either pressure or temperatures.
Pump skids are usually equipped with valves that are used to control the pressure of the centrifugal pumps, restrict flow, and perform emergency shut-offs.
The following types of pump skids are the most commonly used.
Water and wastewater pump skids
Chemical pump skids
Pulp and paper pump skids
These types of industrial pump packages are used for a variety of water-related applications including water purification, rainwater harvesting, and the treatment of wastewater.
Chemical pump packages are used for many applications that are related to the use of chemicals. This includes things like chemical metering, mixing, blending, and injection.
These pump skids are often equipped with chemical metering and injection components and are used in the production of pulp and paper products.
Petroleum
Petrochemical
Pharmaceutical
Agriculture
Food and beverage
Brewing
C&B Equipment has years of experience in the industrial equipment industry. We are a trusted supplier of industrial equipment that has been manufactured by reputable companies like Grundfos.
We can help you find whatever type of equipment you need for your business to run smoothly and keep your operations up and running.
In addition to supplying industrial pump skids and other types of machinery, we also provide top-notch repair, maintenance, and installation services. Our preventative maintenance programs will keep your equipment operating efficiently for as long as they possibly can.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.