EUR
en
Vertical froth pumps
Sala VF Series vertical froth pumps increase the efficiency of pumping frothy slurry. They are ideal for all applications involving handling of air entrained slurries, such as flotation froth in base metal concentrators, phosphate and apatite washing plants and calcium carbonate upgrading plants.
Flotation froth pumping. Phosphate and apatite washing plants. Calcium carbonate upgrading plants. Mixing and distribution units. Cement plants.
More efficient pumping at higher capacities and a smooth operation, free from pulsations caused by air locking.
Extra-long wear life. Parts in different materials are fully interchangeable and can be combined.
No submerged stuffing box, bearings or shaft seals. Design ensures minimum maintenance and eliminates any requirement for water flushing.
The concept behind a froth pump is to avoid pumping air and to separate as much air as possible from the slurry before it reaches the pump impeller.
The vertical froth pumps utilize the same principle as hydrocyclone separation where air is separated from the slurry in a vortex created by the impeller rotation and the tangential inlet to the pump’s conical sump.
This results in more efficient pumping at higher capacities and a smooth operation, free from pulsations caused by air locking.
Sala VF froth pumps are often used in applications that involve handling of air entrained slurries, such as flotation froth in base metal concentrators, phosphate and apatite washing plants and calcium carbonate upgrading plants.
They can also be utilized as a mixing and distribution unit, where dry powder has to be mixed with water, as well as with cement in ready mixed concrete and for grouting and injection mixing.
Standard pumps are supplied with parts in wear resistant Natural Rubber or High Chrome iron alloy, with a nominal hardness of 600 BHN. Other materials are also available.
The wear parts have large material sections for extra-long wear life and are designed for the toughest applications.
Parts in different materials are fully interchangeable and can be combined for optimum life.
The heavy-duty pump shaft is a cantilever design, hanging below the bearing housing. There are no submerged stuffing box, bearings or shaft seals. This design ensures minimum maintenance and eliminates any requirement for water flushing.
Impeller clearance is maintained by external axial adjustment of the shaft/bearing assembly. Bearings have double protection seals against the ingress of slurry.
The casing on the Sala VF froth pump is supported by a beam. The beam is either lowered by hand or a hydraulic jack, depending on the pump size. The beam can be turned out so that the “wet end” parts can be accessed by a lifting device.
| Model | Pump discharge | Height | Width | Weight* | Tank volume |
|---|---|---|---|---|---|
| VF50 | 50 mm (2") | 1 600 mm (63") | 800 mm (31") | 355 kg (783 lbs) | 0,14 m3 (37 USG) |
| VF80 | 80 mm (3") | 2 250 mm (88") | 1 000 mm (39") | 605 kg (1 334 lbs) | 0,37 m3 (98 USG) |
| VF100 | 100 mm (4") | 2 700 mm (106") | 1 400 mm (55") | 975 kg (2 150 lbs) | 0,82 m3 (217 USG) |
| VF150 | 150 mm (6") | 2 700 mm (106") | 1 400 mm (55") | 1 095 kg (2 414 lbs) | 0,82 m3 (217 USG) |
| VF200 | 200 mm (8") | 3 760 mm (148") | 1 850 mm (73") | 2 700 kg (5 952 lbs) | 2,30 m3 (607 USG) |
| VF250 | 250 mm (10") | 3 760 mm (148") | 1 850 mm (73") | 2 900 kg (6 392 lbs) | 2,30 m3 (607 USG) |
| VF350 | 350 mm (14") | 4 500 mm (177") | 2 150 (85") | 5 555 kg (12 245 lbs) | 3,50 m3 (925 USG) |
| *Weight with metal parts. Rubber parts reduce weight by 10% |
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.