EUR
en
20° dash wedge kit This kit is designed to mount the helm at a 20 degree angle to the mounting surface. For raised or recessed mounts, four possible mounting configurations are available. Horizontal recessed mount requires HA5408 drain kit. Not for use with BayStar helm pumps.
Mount/adapter Required for converting a SyTen steering cylinder to a current SeaStar Steering cylinder.
Front cover assembly For Teleflex installation purposes. Includes O-rings.
Teleflex SeaStar hose kit 18" SeaStar cylinder hose kit. Used to connect 3/8" diameter copper tubing to SeaStar steering cylinders. Adapters and compression nuts included.
HF5502 Fitting kit for 2nd station/autopilot to inboard or sterndrive applications. This kit is used with systems plumbed with 3/8" diameter nylon or copper tube only.
HF5501 Fitting kit to add a 2nd station or autopilot to an outboard steering system. To be used when the system has been plumbed with SeaStar outboard steering hose only. Includes non-vented fill plug for lower station helm.
HF5528 3/8 compression X 1/4" MNPT straight adapter fitting. Three per package.
HF5527 3/8" compression union. Three per pack.
Fittings Elbow. 1/4" X 3/8". Three per package.
HF5331 1/4 MNPT X 3/8 compression X 3/8" compression tee. Three per package.
Fittings 3/8" X 3/8" X 3/8". Three per package.
HF5536 3/8" compression X 1/4" MNPT X 3/8" compression tee. Three per package.
208MS-6-5B Female #6 SAE 45° swivel X 5/16" ID hose. Brass construction. Field attachable. Fits MSH-5 hose.
This kit is used to service many BayStar and SeaStar helms. Includes: - Quad ring seal - Woodruff key - 5/8" nut - A top plate - 3 screws - Detailed instructions for servicing a SeaStar helm.
Nylon tubing For hydraulic control systems. Diameter: 1/4".
Pressure gauge Rear-mounted gauge. Displays 0 - 60 PSI.
Quad ring seal For H-80 before 8000.
SeaStar standard outboard steering hose kit. Includes two hoses. For all SeaStar systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. Factory swaged fittings. Length: 34'
Hydraulic steering hose kit SeaStar standard outboard steering hose kit. Includes two hoses. For all SeaStar systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. Factory swaged fittings. Length: 30'
Hydraulic steering hose kit SeaStar standard outboard steering hose kit. Includes two hoses. For all SeaStar systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. Factory swaged fittings. Length: 6'
Hydraulic steering hose kit SeaStar standard outboard steering hose kit. Includes two hoses. For all SeaStar systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. Factory swaged fittings. Length: 8'
Hydraulic steering hose kit SeaStar standard outboard steering hose kit. Includes two hoses. For all SeaStar systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. Factory swaged fittings. Length: 12'
Hydraulic steering hose kit SeaStar standard outboard steering hose kit. Includes two hoses. For all SeaStar systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. Factory swaged fittings. Length: 10'
Hydraulic steering hose kit SeaStar standard outboard steering hose kit. Includes two hoses. For all SeaStar systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. Factory swaged fittings. Length: 22'
Hydraulic steering hose kit SeaStar standard outboard steering hose kit. Includes two hoses. For all SeaStar systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. Factory swaged fittings. Length: 24'
Hydraulic steering hose kit SeaStar standard outboard steering hose kit. Includes two hoses. For all SeaStar systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. Factory swaged fittings. Length: 26'
Hydraulic steering hose kit SeaStar standard outboard steering hose kit. Includes two hoses. For all SeaStar systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. Factory swaged fittings. Length: 28'
HO6144 Allows a user to manually steer an auxiliary engine (kicker motor) using their existing SeaStar hydraulic steering system. Incorporates a 40 series Xtreme cable as linkage between the two engines. Allows independent trim/tilt and full steering stroke of both engines. Works with SeaStar HC5345, HC5358, HC5348, HC5345-3, HC5358-3, & HC5348-3 steering cylinders. Not for use with Baystar steering systems. Simplified installation, using universal connections. Maximum auxiliary engine horsepower: 20HP Cable length: 44".
#6 male SAE to #4 female SAE. Brass.
HT5095 SeaStar 3/8" OD nylon tubing is recommended for inboard, sterndrive, and SeaDrive steering systems with SeaStar (1.7 cubic inch/rev displacement) helms only. Length: 50'
HT5092 SeaStar 3/8" OD nylon tubing is recommended for inboard, sterndrive, and SeaDrive steering systems with SeaStar (1.7 cubic inch/rev displacement) helms only. Length: 25'
Power steering pump slide base For use with Marol power steering pump. Includes mounting hardware.
Tiebar kit For use with SeaStar single cylinder outboard system. Length: 27-1/2". Includes instructions.
Tie bar for twin cylinders For pivot mount cylinders. No adapters are required.
Custom adapter plate for Honda Outboard motors. Used with Marol outboard cylinders
Power steering pump pulley Replacement pulley for Marol steering pump.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.