woven steel mesh sheets

1/4 in. x 1/4 in. MJIC Union, 316 Stainless Steel Hydraulic Straight JIC Flare 37 Degree Adapter Fitting

1/4 in. x 1/4 in. MJIC Union, 316 Stainless Steel Hydraulic Straight JIC Flare 37 Degree Adapter Fitting

316 -04 MJIC X -04 MJIC UNION

SS2403-04-04 1/4 1/4 7/16-20 7/16-20 1.370 SS2403-06-04 3/8 1/4 9/16-18 7/16-20 1.401 SS2403-06-06 3/8 3/8 9/16-18 9/16-18 1.409 SS2403-08-04 1/2 1/4 3/4-16 7/16-20 1.511 SS2403-08-06 1/2 3/8 3/4-16 9/16-18 1.519 SS2403-08-08 1/2 1/2 3/4-16 3/4-16 1.618 SS2403-10-08 5/8 1/2 7/8-14 3/4-16 1.779 SS2403-10-10 5/8 5/8 7/8-14 7/8-14 1.881 SS2403-12-04 3/4 1/4 1-1/16-12 7/16-20 1.850 SS2403-12-06 3/4 3/8 1-1/16-12 9/16-18 1.850 SS2403-12-08 3/4 1/2 1-1/16-12 3/4-16 1.948 SS2403-12-12 3/4 3/4 1-1/16-12 1-1/16-12 2.161 SS2403-16-12 1 3/4 1-5/16-12 1-1/16-12 2.318 SS2403-16-16 1 1 1-5/16-12 1-5/16-12 2.251

The hydraulic tube fittings conform to the performance requirements specified in SAE J514, SAE J518, SAE J1453, SAE J1926/ISO 11926 and related standards. The working pressure ratings listed below are based on a 4:1 design factor for minimum burst. As specified in SAE J514, these are dynamic pressure ratings and the fittings are capable of passing a cyclic endurance (impulse) test for one million cycles at 133 % of the corresponding working pressure. The rated working pressure for any fitting is based on the lowest pressure rated fitting end.

For example, a fitting may include one -4 (1/4") male 37-degree tube end and one -6 (3/8") male pipe end. From the tables below, the rated working pressure for the -4 male 37-degree tube end is 34.5 MPa (5,000 psi) and the rated working pressure of the -6 (3/8") male pipe end is 21 MPa (3,000 psi). The rated working pressure of the fining would be 21 MPa (3,000 psi). For proper performance, the design of any hydraulic system should take into consideration the rated working pressures for each of the components of the system, including standard ratings for hose and tubing components and assemblies. For any application, testing should be performed to assure safe and satisfactory performance.

Pressure Ratings - 37° Flare SAE J514

Allowable Working Pressure Ratings (Capable of 4 to 1 Minute Burst)

Nom. SAE Dash Size Nom. Tube OD Inches 37° Flare Straight Thread Nom. Pipe Size SAE St. Threads Union and Bulkhead (Psi) Fittings with Pipe Threads (psi) 2 1/8 5/16-24" 1/8" 5000 5000 3 3/16 3/8"-24 1/8" 5000 5000 4 1/4 7/16"-20 1/8" 5000 5000 5 5/16 1/2"-20 1/8" 5000 5000 6 3/8 9/16"-18 1/4" 5000 5000 8 1/2 3/4"-16 3/8" 4500 4000 10 5/8 7/8"-14 1/2" 3500 3000 12 3/4 1-1/16"-12 3/4" 3500 3000 14 7/8 1-3/16"-12 3/4" 3000 2500 16 1 1-5/16"-12 1" 3000 2000 20 1-1/4 1-5/8"-12 1-1/4" 2500 1150 24 1-1/2 1-7/8"-12 1-1/2" 2000 1000 32 2 2-1/2"-12 2" 1500 1000

Additional Information

Size (inches):.250 (1/4") Material Type:316 Stainless Steel Product Type:JIC Union Category Type:Hydraulic Adapters Weight (lbs):.05 Additional:From Import