8 dredge pump check valve

HondaWSP100 | Submersible Water Pump | Honda Pumps

WSP100

WSP100AA 1hp 115V submersible trash pump

Side discharge

150 gal./min capacity

Solids handling capability up to 2"

Automatic non-mercury float switch

Rated for continuous use

Features

1 hp, 115V submersible trash pump 115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).

Solids handling up to 2.0" Move slurry and dirty liquids without the worry of damaging the pump.

Ideal for draining basements, window wells, garden irrigation, decorative fountains and more

150 gal./min capacity

Rated for continuous use Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.

Solids handling up to 2.0" Move slurry and dirty liquids without the worry of damaging the pump.

Lightweight, durable stainless steel casing The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.

Automatic non-mercury float switch Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.

Built in thermal reset switch If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.

25 foot heavy duty cord

Side discharge Side discharge submersible pumps offer higher discharge and solids handling capabilities of up to 2 inches.

Operates fully or partially submerged No need to worry about the water level for the pump!

Shielded ball bearings for added durability Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.

Efficient air-insulated motor

Oil lubricated double mechanical seals Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.

Specifications

Pump Type Submersible Trash pump

Starting Type Automatic

Casing Stainless Steel

Motor (HP) 1

Voltage 115

Starting amps 47

Running amps 11.1

Duty Continuous

Motor insulation Class F

Overhead protection Built-In Thermal Automatic Reset

Discharge Type Side

Discharge capacity 150 gpm

Max. head (feet) 42

Port diameter ( inches) 2.0 FNPT

Maximum pressure 18 psi

Solids handling 2.0"

Impeller Single Channel Stainless Steel

Seals Tandem Mechanical Carbon/Ceramic-upper SIC/SIC-lower

Cord length (feet) 25

Cord type Heavy-Duty 115V

Dimensions (WxH) 9.0" x 22.8"

Pump diameter 9.0"

Dry weight 41 lbs.

Residential Warranty 1 year

Commercial Warranty 1 year