gravel sand pump vs sand pump

How to Clean and Maintain My Sewage Pump ?

Benefits of a sewage pump

Sewage pumps are designed to remove standing water from basements and crawl spaces and store it safely through the house's wastewater system. Sewage pumps are relatively simple to operate, although they are more complex to install.

Prevents flood damage

When heavy rains trigger flooding into your basement, you can quickly have 15 inches of flood water flooding the floor and damaging almost everything inside, which can be especially damaging if you store valuable items in your basement. With a working sewage pump, this disaster can be easily avoided.

Reduce mold and mildew

Constant moisture in the basement due to standing water can lead to the growth of mold and mildew. These are not only harmful to building materials, but are also a health concern.

Reduces the risk of fire

Water can short-circuit basement appliances, such as washing machines, water heaters and heating systems. Therefore, in addition to damaging these valuable appliances, water can also create a fire hazard. A sump pump will prevent water from threatening appliances that could start a home fire.

Maintenance and repair

A sewage pump eliminates wastewater from the basement. It is important to perform routine maintenance on sewage pump and ejector pumps at least once or twice a year.

1 Clean and prepare the pump

Turn off the pump's circuit breaker and water source so it will not turn on while working. Carefully open the access panel on the tank and inspect the interior for debris. Put on a pair of rubber gloves and remove food, paper towels or other items from the pump.

2 Check the oil

Check the outside of the pump to locate its oil gauge. If there is no external gauge, open the pump to gain access to the oil tank. Remove the dipstick from this container and check the reading. Remove the oil plug and drain the oil into the pan. Wait for it to stop running before replacing the cap and adding new lubricant.

3 Check the pump impeller

Locate the pump impeller and motor body inside the pump. These areas tend to clog. If you find grease buildup, wipe them down carefully and remove the clogs.

4 Tighten connecting elements

Check connecting components, such as any screws, belts, and hose brackets, to ensure they are tight. Use a regular screwdriver to tighten as needed.

5 Seals Stay Tight

Rub the seal area of the motor, such as a welded section, with your finger to feel for any visible signs of fracture or wear. These seals will usually break in about 10 to 20 years. Replace or repair damaged seals or o-rings.

6 Clean Vents

Locate the pump vents on the unit - location will vary by model. Check the vents for waste buildup, such as dirt, dust, or other debris. Use your fingers to separate them and dispose of them in a trash bag. Open the vents to let fresh air in.