sewage treatment plant

Zoeller - Zoeller 282-0029 Model D282 "Waste-Mate" Sewage Pump 0.5 HP 230V 1PH 25' Cord Automatic #ZLR282-0029

Zoeller Model 282 Sewage Pump Description

The 282 Series of submersible pumps is designed to transfer raw sewage or stormwater in lift station applications. The Model 282 is built with a non-clogging vortex impeller allowing it to pass 2" spherical solids. This ensures reliable operation in the toughest sewage applications.

The 282 series is built for long term, reliable performance. The motor housing and adapter are cast iron and include the addition of cast-in place fins to maximize heat dissipation. Heavy-duty construction and oversized bearings ensure the 282 is able to withstand even the most challenging sewage lift station applications.

Zoeller Model 282 Sewage Pump Features and Benefits

Nonautomatic Pumps will Require a Piggyback Float Switch or Control Switch with a Control Panel to Run the Pump

Cast Iron Vortex Impeller Allows the Free Passage of 2" Spherical Solids Which Prevents Clogging and Increases Reliability

Stainless Steel Screws, Handle and Hardware to Prevent Rust and Corrosion

Powder-Coated Epoxy Finish Provides Corrosion-Resistance and Extends the Life of the Pump in Harsh Environments

100% Factory Tested - Every Pump is Submerged in Water and Tested at the Factory to Ensure that it Performs as Expected when you Receive it.

Comes with a 1-Year Limited Warranty Giving you Protection Over Your Investment and the Peace of Mind you Expect in a Quality Product

Zoeller 282-0029 Sewage Pump Specifications

VOLTAGE: 1ø, 230V, 60Hz

HORSEPOWER: 0.5 HP

AMP DRAW (full load): 5.0

MOTOR TYPE: Permanent Split Capacitor (PSC)

RPM: 1750

MAXIMUM HEAD: 26'

MAXIMUM CAPACITY: 123 GPM

SWITCH TYPE: Automatic

SWITCH 'ON' LEVEL: 16-1/2"

SWITCH 'OFF' LEVEL: 5-1/4"

DISCHARGE PIPE SIZE: 2" NPT Vertical Discharge

MAXIMUM SOLIDS HANDLING SIZE: 2" Spherical Solid

IMPELLER TYPE: Cast Iron, Non-Clogging Vortex

CORD LENGTH: 25'

CORD TYPE: UL Listed 3-Wire Neoprene Cord and Plug

BODY CONSTRUCTION: Cast Iron

MAXIMUM LIQUID TEMPERATURE: 130°F (54C)

Zoeller Limited Warranty

Zoeller products often carry warranty terms that vary in length based on the product type. Refer to the installation manual for specific warranty term.

Manufacturer warrants, to the purchaser and subsequent owner during the warranty period, every new product to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of three years from the date of purchase. Proof of purchase is required. Parts that fail within the warranty period, that inspections determine to be defective in material or workmanship, will be repaired, replaced or remanufactured at Manufacturer's option, provided however, that by so doing we will not be obligated to replace an entire assembly, the entire mechanism or the complete unit. No allowance will be made for shipping charges, damages, labor or other charges that may occur due to product failure, repair or replacement.

This warranty does not apply to and there shall be no warranty for any material or product that has been disassembled without prior approval of Manufacturer, subjected to misuse, misapplication, neglect, alteration, accident or act of nature; that has not been installed, operated or maintained in accordance with Manufacturer's installation instructions; that has been exposed to outside substances including but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or other person to assume for us any other liability in connection with our products.

Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211, Attention: Customer Service Department to obtain any needed repair or replacement of part(s) or additional information pertaining to our warranty.

MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY.

Some states do not allow limitations on the duration of an implied warranty, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.