slurry sand pump backwash hose

NEW Weir Warman 16649 Sleeve Shaft 2.5x2 Slurry Pump

NEW Weir Warman 16649 Sleeve Shaft 2.5x2 Slurry Pump

SKU:A-12-LEX-2-DB

Vendor:Weir

We currently have 1 in stock.

Availability:In Stock

Condition:NEW

Buy 2+ Save 10%

$64.99

NOS, surplus in packaging. Packaging has wear.

Related Products

NEW Allen-Bradley 1732ES-IB12XOB4 ArmorBlock Guard IO Safety Module 12 IN 4 OUT

NEW SEALED

•Inputs/Outputs: 12 Sink Inputs and 4 Solid State Sourcing Outputs

•Operating Voltage: 24V DC nominal (19.2–28.8V DC range)

•Network Protocol: EtherNet/IP Safety

•Protection Rating: IP65/IP67 industrially-hardened housing

NOS, surplus in packaging. Packaging has wear.

NEW TDK-Lambda DPP480-24-1 DIN Rail Power Supply AC-DC 24VDC 20A 480W

•Part Number: DPP480-24-1

•Input Voltage: 90–264 VAC / 120–370 VDC (Single-phase)

•Output Rating: 24V DC, 20A, 480W

•Output Adjustment: 22.5 to 28.5V DC via potentiometer

•Efficiency: 89% typical

NOS, surplus no box. Minor storage wear, comes as shown

NEW Square D FY14020C I-Line Circuit Breaker 1 Pole 20A 277V

•Part Number: FY14020C

•Amperage: 20 Amp

•Voltage Rating: 277 VAC at 50/60 Hz; 125 VDC

•Interrupt Rating: 14 kA at 240 VAC

•Mounting Type: I-Line Style Plug-In

NOS, surplus in packaging. Packaging has wear.

NEW Vermont Gage 9512045400 #4 Brass Pin Gage Handle Bushing .3821-.3940

Part Number: 9512045400 (or #4 Bushing .3821-.3940)

Accessory Type: Reversible-Handle Bushing

Material: Brass

Compatible Gage Diameter Range: 0.3821 in to 0.394 in

Handle Number:#4

NOS, surplus

NEW Vermont Gage 951205200 #4 Brass Pin Gage Handle Bushing 0.3611 in to 0.371 in

Part Number: 951205200

Handle Number:#4 Bushing

Material: Brass

Compatible Gage Diameter Range: 0.3611 in to 0.371 in

Handle Type: Reversible-Handle, Double End

NOS, surplus

NEW Parker HAEVXBG023A Single Solenoid Valve 4 Way 2 Position 120VAC Spring Air Ret

•Part Number: HAEVXBG023A (Isys ISO HA Series)

•Type: 4-Way, 2-Position Single Solenoid Valve

•Voltage: 115/120 VAC, 50/60 Hz

•Interface: ISO 15407-2, Plug-in, Size 26mm (HA)

NOS, surplus in packaging. Packaging has wear.

NEW ASCO 8215B50 Red Hat Solenoid Valve 1 Inch NPT 120/60 110/50 25 PSI Fuel Gas

•Part Number: 8215B50 (Series 8215)

•Pipe Size: 1 inch NPT

•Voltage: 120V/60Hz, 110V/50Hz

•Pressure Rating: 25 PSI (Air, Inert Gas, and Fuel Gas)

•Valve Operation: 2-Way Normally Closed (NC)

•Body Material: Aluminum

NOS, surplus in packaging. Packaging has wear.

NEW Timken LM104949 Tapered Roller Bearing Cone 2 Inch Bore Made in USA

•Part Number: LM104949 (Cone)

•Bore Diameter: 2.0000 in (50.8 mm)

•Width: 0.8750 in (22.225 mm)

NOS, surplus in packaging. Packaging has wear.

NEW Timken G1115KRRB + COL AG Fafnir Ball Insert Bearing 1-15/16 Inch Bore USA

•Part Number: G1115KRRB + COL AG

•Bore Diameter: 1-15/16 inch (49.21 mm) cylindrical bore

•Outside Diameter: 3.5433 inches (90 mm) spherical OD

NOS, surplus in packaging. Packaging has wear.

NEW Sony A6750129A Gear Box Block Assembly LVO-7000 VTR

Part Number: A-6750-129-A (also A6750129A)

Accessory Type: Gear Box Block Assembly

Brand: Sony

Compatibility: LVO-7000 VTR (Video Tape Recorder) systems

NOS, surplus

NEW Timken 42584 Tapered Roller Bearing Single Cup 5.8437 Inch OD Made in USA

•Part Number: 42584

•Type: Single Tapered Roller Bearing Cup (Outer Ring)

•Outside Diameter: 5.8437 in (148.43 mm)

•Cup Width: 0.8438 in (21.433 mm)

NOS, surplus in packaging. Packaging has wear.

NEW SPX VJ14101805169-1 Gate Valve Assembly 2'' Relief Valve

Part Number: VJ14101805169-1 (also T95262-1, VBDY 215190 601)

Valve Type: Gate Valve Assembly, Inlet VBDY

Brand: SPX Flow

Inlet/Outlet Connection: 2"

NOS, surplus no box. Minor storage wear, comes as shown

NEW Parker Denison 024-44065-0 T6CM B25 1R00 C1 Vane Pump Hydraulic

•Part Number: 024-44065-0

•Model Number: T6CM B25 1R00 C1

•Brand: Parker Denison Hydraulics

•Displacement: 79.3 ml/rev

•Rotation: Right (clockwise when viewed from shaft end)

•Mounting Interface: SAE-B 2-bolt J744c Type

NOS, surplus no box. Minor storage wear, comes as shown

NEW Timken 399A Tapered Roller Bearing Cone 2-11/16 Inch Bore Made in USA

•Part Number: 399A

•Bore Diameter: 2.6875 in (68.263 mm)

•Cone Width: 0.8660 in (21.996 mm)

Brand:Timken Manufacturer:Timken MPN:399A Model Number:399A

NOS, surplus in packaging. Packaging has wear.

Allen-Bradley 20-HIM-A6 PowerFlex Enhanced HIM Human Interface Module Series A

•Part Number: 20-HIM-A6 Series A

•Input Voltage: 12V DC (supplied from host drive)

•Current Draw: 140 mA

•Communication Protocol: Drive Peripheral Interface (DPI)

Used condition, with normal signs of wear. Comes as shown, please check pics.

Balluff BNI00E1 BNI EIP-538-005-Z063 EtherNet/IP IO-Link Master 8-Port Module

•Part Numbers: BNI00E1 / BNI EIP-538-005-Z063

•Interface: EtherNet/IP I/O with 8x IO-Link master ports

•I/O Capacity: 12x PNP Type 3 digital inputs and 8x PNP digital outputs

•Operating Voltage: 18–30.2 VDC (24V DC nominal)

Used condition, with normal signs of wear. Comes as shown, please check pics.

Balluff BNI00AJ BNI IOL-719-002-Z012 IO-Link Analog Sensor Actuator Hub Module

•Part Numbers: BNI00AJ / BNI IOL-719-002-Z012

•Interface: IO-Link 1.1 (M12, A-coded, male)

•Analog Inputs: 8x configurable ports for voltage, current, RTD (Pt100/1000), or Thermocouple (J, K)

•Operating Voltage: 18–30.2 V DC (supplied via IO-Link master)

Used condition, with normal signs of wear. Comes as shown, please check pics.

Global CNC 86-11C 3/4 Tool Holder Bushing 1 inch OD Type C CNC Lathe

Part Number: 86-11C 3/4

Bushing Type: CNC Style Type C

Inner Diameter (ID): 3/4 Inch (0.750")

Outer Diameter (OD): 1 Inch (1.00")

Length Under Head: 2-3/4 Inch

Used condition, with normal signs of wear. Comes as shown, please check pics.

Global CNC 86-11C 3/4 Tool Holder Bushing 1 OD C Style

Bushing Type: CNC Style Type C

Inner Diameter (ID): 3/4 Inch (0.750")

Outer Diameter (OD): 1 Inch (1.00")

Length Under Head: 2-3/4 Inches

Material: Hardened and Ground Steel (often 8620L Alloy Steel) with black oxide coating

Used condition, with normal signs of wear. Comes as shown, please check pics.

Global CNC SJ11CS 3/4 Shortened Tool Holder Bushing 1 Inch OD

Part Number: 86-11CS 3/4 (also CNC86-11CS-3/4 or 8611CS .750)

Bushing Type: CNC Style Type CS (Shortened C Style)

Inner Diameter (ID): 3/4 Inch (0.750")

Outer Diameter (OD): 1 Inch (1.00")

Length Under Head: 1-3/4 Inches (approx, based on metric equivalent)

Material: Hardened and Ground Alloy Steel with Black Oxide Coating

Used condition, with normal signs of wear. Comes as shown, please check pics.

Kennametal FTE037444 3/8 Tap Extension Driver 0750 OD Straight Shank

Part Number: FTE037444

Accessory Type: Tap Extension Driver, Tapping Chuck

Tap Diameter Capacity: 3/8 inch

Outer Diameter (OD): 0.750 inch (3/4")

Shank Diameter: 0.590 inch (approx 15mm)

Overall Length (OAL): 4-1/2 inches

Adapter Style Machine Side: Straight-Cylindrical Shank

Used condition, with normal signs of wear. Comes as shown, please check pics.

Global CNC 11C 1/2 Tool Holder Bushing 1 Inch OD C Style CNC Lathe

Part Number: 86-11C 1/2 (or CNC86-11C-1/2, 8611C .500)

Bushing Type: CNC Style Type C

Inner Diameter (ID): 1/2 Inch (0.500")

Outer Diameter (OD): 1 Inch (1.00")

Length Under Head: 2-3/4 Inches (2.750")

Material: Hardened and Ground Alloy Steel with black oxide coating

Used condition, with normal signs of wear. Comes as shown, please check pics.