200m barbed wire

AN Aluminum tube / hardline, tube ends, tube nuts, olives

AN Aluminum tube & fittings

SPD aluminum hardline tube, tube ends and tube nuts.Available in sizes AN4 (1/4"), AN6 (3/8"), AN8 (1/2"), AN10 (5/8") and AN12 (3/4"). Used for fuel system, water system, oil system and air system. 37deg. flare.

Subcategories

AN Aluminum tubing

AN Aluminum tube ends

AN Aluminum tube Olives

Filter

AN Size: - AN4 - AN6 - AN8 - AN10 - AN12

Products

Aluminum tubing AN4 1/4" (6.35mm)

Aluminum tubing AN5 5/16" 7,94mm

Aluminum tubing AN6 3/8" (9,52mm)

Aluminum tubing AN8 1/2" (12.7mm)

Aluminum tubing AN10 5/8 " (15,87mm)

Aluminum tubing AN12 3/4" (19,05mm)

AN10 aluminum cutting ring (5/8")

AN12 aluminum cutting ring 3/4"

AN4 - 1/4" female Aluminum tube cutter fitting

AN4 aluminum cutting ring (1/4")

AN6 aluminum cutting ring (3/8")

AN6 aluminum cutting ring (5/16")

AN8 aluminum cutting ring 1/2"

AN4 - 1/4" male Aluminum tube cutter fitting

AN6 - 3/8" female Aluminum tube cutter fitting

AN Hardline & fittings

Are the aluminum tubes the same size as the AN hose?Pipe and hose are called the same, but the sizes differ. The AN measurement is an outer measurement, and the tubes are thicker than the hose; therefore, the inner diameter is smaller. Hence, you often have to use larger pipes than hoses.

When should pipes be used instead of hose?Hose or piping is entirely a matter of taste

What are the advantages of an aluminum pipe instead of a hose?A significant advantage is that aluminum pipes conduct heat well and help to cool fuel, oil, and the media used in the tube. It works like a big cooler. As a reference, 4 meters of aluminum pipes in a system corresponds to 10 40cm pipe coolers or four 1-meter pipe coolers.

What are the disadvantages of an aluminum pipe instead of a hose?The aluminum pipe takes longer to install than a hose. There will also be more joints in the system as hoses must be used between the engine and body and in the places where it moves, as aluminum pipes are not flexible like a hose.

Can a hose and hose clamp be used directly on the aluminum pipe?Using a hose with a clamp on the tube is not recommended as it has no barbs, so the risk of breaking apart is high.

Can the pipes be bent easily?Yes, the pipes are easily bent and are standard inch size, which allows you to use most pipe bending tools.

Do shear ring couplings work with steel pipes?Do not use cutting ring couplings with steel pipes, as steel pipes are too hard for the cutting ring to prune correctly.