EUR
en
Type 304 Stainless Steel 18 gauge smooth shank stick brads Approved for use in ACQ Lumber Brads are thinner than finish nails and used for trim work, baseboards, as well as cabinets and furniture construction. The thin profile of a brad is designed to help prevent wood splitting. Stainless brads are preferred for outdoor applications. They are perfect for projects like bird houses, storage containers, window/door trim, and flower boxes.
304 & 316 Stainless Steel with Annular Thread Large flat head, diamond point Use to fasten natural wood, slate or copper roofing Available in annular thread for superior holding power Made in USA AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
Stainless Steel Wire collated, 15°, annular thread Full round diamond patterned head Available in both AISI 304 & 316 stainless steel Nail dimensions meet Fiber Cement Siding Industry requirements
The Construction screw does the job of a lag screw. Dome Head enhances the structural capability. Tapper Point which consists of the Cork Screw Start and Blade Cutting Thread for easy piercing and alleviating strain on the material. Specially designed Tight Star Recess system holds U2 bits firmly in place allowing these screws to be installed with one hand. "Talon Grip" nibs under the head hold the screw tight to prevent loosening and dig into the material when countersunk. Reamer Thread enlarges the hole in the material to create a larger passage when drawing materials together and reduces tension on the screw head.
6 Lobe Star drive recess, similar to Torx® Self-countersinking bugle head in medium & soft density wood Type 17 notched point for fast penetration Threaded approximately 2/3 of shank on most sizes Deep coarse threads for better hold Approved for use in all pressure treated lumber Always specify Type 316 Stainless Steel for Salt Water applications
Type 316 Stainless Steel for Superior Corrosion Resistance Sharx Marine Screws are made of salt water safe type 316 Stainless Steel. Use in composite materials, fiberglass, engineered wood products such as plywood, OSB, laminated wood veneers and wood substitutes High-low thread form with "teeth" bites fast and holds tight Strength compares favorably with that of carbon steel fasteners Screws up to 1" in length are fully threaded; screws more than 1" long are threaded 2/3 of the shank length #2 Phillips drive; Extra sharp point Also available in pan head
Star Drive - Type 316 Stainless Steel Experience the revolutionary 4 corner thread with raised ridge point for fast penetration, reduced drive torque and outstanding holding power. Self Countersinking Flat Head with Nibs Install using 35% less torque! For Decking, Docks and Boardwalks; Finishing, Millwork & Trim Star Drive 6 Lobe Type 316 Stainless Steel for the ultimate in corrosion resistance Approved for use in ACQ treated lumber
Type 316 Stainless Steel Annular Thread, flat head Made of type 316 stainless steel for the ultimate corrosion resistance For installation of stainless steel joist hangers & framing connectors Made in USA AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
Packages of 375 screws to go with the Pro Plug System®. ✔ Composite screws with a star drive and undercut head to penetrate the hard decking surface. ✔ Reverse threads under the head prevent mushrooming. Screw features a tri-lobe shank and acute thread angle to increase its driving power and penetrate cleanly through dense decking material. ✔ Screws feature a type 17 auger tip that allows for fast and easy driving while preventing splitting.Available in: Epoxy Stainless Steel Salt Water Grade 316 Stainless Steel Type 410 Stainless Steel for use with Trex Elevations® and other metal framing systems
Type 304 Stainless Steel 16 gauge smooth shank stick brads Straight Collation Available in 1,000pc boxes, discounts at 5 or more boxes Remember to check your nail gun for leg length limitations before ordering
304 & 316 Stainless Steel Annular thread, diamond patterned head Slender shank reduces splitting Have a wider head than our standard wood siding nails to firmly secure shakes and shingles Ring shank reduces wind damage and nail head popping Ideal for natural wood shakes and shingles, including hand splits Nails should be long enough to penetrate sheathing 1/2" to 3/4" plus the shingle thickness Available in both AISI type 304 and 316 stainless steel Made in USA AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
The Strong-Drive SD Connector screw is designed for use in stainless steel connectors, replacing the need for nails. Load Rated Tested and approved for use with many Simpson Hangers and Connectors In certain applications, the load values achieved by the #9 SD Screw is greater than that of 10d common nails Specially designed screw shank pairs with holes in Simpson Connector Box includes the hex driver
Type 305 Stainless Steel - Wood Screws Type 17 notched point for fast penetration Self-countersinking bugle head Square drive recess reduces driver cam-out Threaded approximately 2/3 of shank on most sizes Deep coarse threads for better hold
15 gauge angled finish nails 35° tape collated Smooth shank brad head Fits Senco DA Series Available in 1,000 pc boxes and discounted at 5 or more boxes Fits SENCO, Porter Cable, Hitachi, DeWalt and more...
Type 304 & 316 Stainless Steel Smooth shank, brad head, diamond point Excellent for interior/exterior trim and cabinetry exposed to wet conditions Available in both AISI type 304 and 316 stainless steel Made in USA AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
For Attaching Fiber Cement Siding through Furring Strips to Wood Studs Fasten fiber cement to wood studs and Stress-Skin panels .390" diameter wafer head with countersinking nibs #2 square drive - threaded full length Type 17 point with coarse threads Type 316 Stainless Steel for the ultimate in corrosion resistance Use 1-1/4" screws to attach fiber cement siding to Stress-Skin panels Use 1-5/8" & 2-1/4" screws to blind fasten fiber cement lap siding to wood studs AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
Type 304 Stainless Steel 3/8" head diameter Ring Shank for superior holding power Type 304 Stainless Steel
Full Round Head Ring shank 9/32" diameter full round checker patterned head Approved for use in ACQ Lumber Available in convenient 1,000 nail job packs Fits nailers designed for 20-22°, full round head, plastic collated nails
Type 316 Stainless Steel - Salt Water Safe 16 gauge smooth shank stick brads Straight collation Approved for use in ACQ lumber
304 & 316 Stainless Steel Features an annular thread and diamond patterned head. Blunt diamond point and slender gauge minimize splitting Small head diameter allows face nailing or blind nailing (tongue & groove) Annular threads prevent cupping of siding & provide outstanding withdrawal resistance Generous under-head filet allows nail to be driven flush or countersunk Always use type 316 stainless steel siding nails in saltwater exposures Made in USA Siding nail length should be sufficient to penetrate a minimum of 1-1/2" into studs or studs & sheathing combined. AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
304 & 316 Stainless Steel Use for construction of decks, docks, planters or any outdoor wood construction Diamond point **Please note: Sizes 2-1/2" - 3-1/2" nails have a checkered head Recommended First Choice by the American Plywood Association, California Redwood Association, American Wood Preservers Bureau and Western Red Cedar Lumber Association Available in both AISI type 304 and 316 stainless steel Made in USA Annular Ring Thread: Use this shank style for maximum resistance to withdrawal in cross grain nailing. Annular ring shank nails are especially effective in preventing cupping and nail head popping in siding and decking installations. Not recommended for high shear, lateral or racking loads or end -grain nailing. AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application
For Attaching Wood Siding, Wood Panels and Metal Trim to Steel Studs Also perfect for use with stainless steel, aluminum and steel deck framing systems Screws have a trim head, #3 drill point and T-15 star drive. Triple strength corrosion resistance: 410 stainless steel + Xylan coating + Bright hardening Drill point with auger tip for self-tapping Pre-drilling a pilot hole is recommended
Full Round Head Type 316 Stainless Steel Plastic strip, 20-22°, ring shank 9/32" diameter full round checker patterned head Type 316 stainless steel should be specified for salt water applications Available in convenient 1,000 nail job packs Fits nailers designed for 20-22° full round head, plastic collated nails
The Universal Screw™ is great for use in deck construction. Tapper Point, consisting of the Cork Screw Start and Blade Cutting Thread allows the screw to pierce materials easily. Screws feature a Star Recess system that holds the U2 bits securely in place. This allows the screw to be installed one-handed. The universal screw includes nibs that help the screw to countersink into the toughest of materials. Below the smooth shank is the Reamer Thread*, which enlarges the hole to create a passage when drawing materials together and reduces tension for the screw head. #10 x 3-1/8" screws are Case Hardened Carbon Steel, the rest are 316 Stainless Steel *Reamer Thread is only present on screws 2" and longer
316 Stainless Steel - Wood Screws Salt Water Safe Type 17 notched point for fast penetration Self-countersinking bugle head Square drive recess reduces driver cam-out Threaded approximately 2/3 of shank on most sizes Deep coarse threads for better hold Use with cedar, redwood, engineered wood and preservative treated *Type 316 Stainless Steel should always be specified for salt water applications. 316 grade stainless steel has a lower carbon content than 18-8 type stainless (302HQ, 304 and 305) and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application to prevent rusting & bleeding through.
Type 305 Stainless Steel - Star Drive For fast and easy installation in high-exposure environments. DWP screws are built to last. Revolutionary 4 corner thread with raised ridge point for fast penetration and outstanding holding power Self Countersinking Flat Head with Nibs Installs with 35% less torque! For Decking, Docks and Boardwalks; Finishing, Millwork & Trim Star Drive 6 Lobe Type 305 Stainless Steel Approved for use in ACQ treated lumber
Fits 16 ga Paslode ToolsType 304 Stainless Steel 16 gauge smooth shank - brad head 20° tape collated Fits popular Paslode IM250A and DeWalt (DC618KN) & (DC618KA) See the Nail Gun Reference Toolfor more compatible nailers Approved for use in ACQ lumber
Square Drive #1 Square Drive - small unobtrusive .230" head Type 17 point for fast penetration Self-countersinking trim head Square drive recess reduces driver cam-out problems Dry lubricated with non-stick film Our stainless steel trim head screws are threaded approximately 2/3 of shank Available in AISI type 305 and 316 stainless steel AISI Grade 316 Stainless Steel has a lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
Star Drive - Type 316 Stainless Steel Trim Head T15 star drive - 6 lobe 4 corner thread with raised ridge point Fast penetration & superior holding power Installs using 35% less torque! Type 316 stainless steel for the ultimate in corrosion resistance Salt Water Safe Approved for use in treated lumber
Fits 15 ga BostitchType 304 Stainless Steel 15 gauge smooth shank- brad head 25° tape collated Type 304 Stainless Steel packaged in 2m boxes Approved for use in ACQ lumber
Type 316 Stainless Steel 18 gauge smooth shank stick brads Approved for use in ACQ Lumber Type 316 stainless brads are best suited for outdoor applications in a seaside or corrosive environment. Type 316 stainless steel will provide extra protection from salt water, salt air and chemicals like chlorine from pools and spas. Brads are ideal for finishing work, furniture, and outdoor projects. They are used to construct outdoor games such as cornhole and dartboards, storage containers for pool floats, and for racks for surf and bodyboards.
15 gauge angled finish nails 35° tape collated Smooth shank brad head Available in 4,000 pc boxes Approved for use in ACQ lumber Fits SENCO, Porter Cable, Hitachi, DeWalt and more...
The Construction screw does the job of a lag screw. This code-compliant heavy-duty self-tapping structural fastener is versatile and great for a variety of uses. Dome Head provides an extra-large bearing surface under the head. Tapper Point enables easy piercing and relives strain on material while installing. Tight Star Recess system is specially designed to hold U2 bits firmly in place. They won't slip, even when upside down, allowing these screws to be installed with one hand. Talon Grip nibs secure screw fastening to prevent loosening over time. Reamer Thread enlarges the hole in the material to create a larger passage when drawing materials together and reduces tension on the screw head. The perfect fastener for staircases, deck frames, ledger boards, joists, rafters, planters, play sets and more.
Type 316 Stainless Steel Annular thread, checkered head Produced expressly for siding materials made of fiber cement composites AISI Type 316 stainless provides the ultimate in corrosion protection Extra sharp diamond point for optimum driving Made in USA AISI Grade 316 Stainless Steel has a lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application to prevent rusting & bleeding through finishes.
Perfect for trim board, railings and fine carpentry Small Finishing head, 0.196" T-10 Star Drive Double twist at the head provides drawing strength Tapper Point allows for the screw to easily pierce the material and alleviate strain. 316 Stainless Steel, marine-grade for ultimate corrosion resistance.
The Universal Screw™ is great for use in deck construction. Tapper Point, consisting of the Cork Screw Start and Blade Cutting Thread allows the screw to pierce materials easily. Screws feature a Star Recess system that holds the U2 bits securely in place. This allows the screw to be installed one-handed. The universal screw includes nibs that help the screw to countersink into the toughest of materials. Below the smooth shank is the Reamer Thread, which enlarges the hole to create a passage when drawing materials together and reduces tension for the screw head. Screws are also available in Case Hardened Carbon Steel and 316 Stainless Steel
U2's Cap Screw is designed for interior and exterior use. Modified low-profile truss head with star drive Perfect for cabinets, trim, moulding, light-duty framing, vinyl siding and window installations. Dome head features a cutting ribbon underhead The Tapper Point is designed to easily pierce while evenly dispersing any strain on the material. The tip of the screw begins with a Cork Screw start. When paired with the blade cutting thread, this screw is installed quickly and easily. As with all U2 screws, it features a tight star recess that holds the U2 bit tightly. It is such a perfect fit that this screw can be installed with one hand. This screw takes a T15 bit.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.