EUR
en
Wire Mesh Box Gabions Container
Hot dipped zinc coating, pvc coating, galfan coating.
tying of steel wire and lacing of c rings.
Gabion boxes are generally more rigid and often designed as smaller, modular units than gabion cages. Gabion boxes can stack easily, ideal for constructing retaining walls and protective structures.
MADE OF HOT –DIP GALVANIZED WIRE MESH is a popular type of box gabions in corrosion resisting bank works.
Dimensions (LXWXH) in meters 3 X 1 X 1 2 X 1 X 1 1,5 X 1 X 1 1 X 1 X 1 2 X 1 X 0,5
The standard type box gabion shall be made from flexible hot dip galvanized wire mesh.
Twist Weave Wire Mesh
The mesh shall be hexagonal woven mesh of the type 8 X 10 cm with the Joins formed by twisting each pair of wires through three half turns.
The wire used in the fabrication of the gabions and in the wiring operation during, construction shall be in accordance with BS 1052:1980 “Mild steel wire” having an average tensile strength of 360-520 N/mm². These values refer to the wire before fabrication of the netting. The diameter of the wire used in the fabrication of the netting shall not be less than 2.7 mm.
All wires used in the fabrication of the gabions and in the wiring operation during construction shall be galvanized in accordance with CYS EN 10244 – 2:2009. The minimum zinc coating on wire 2.7 mm in diameter shall not be less than 245 gr/m². In case the diameter of the wire used in the fabrication of the netting is greater than the value specified, then the thickness of the zinc coating shall be in accordance with CYS EN 10244-2:2009.
The adhesion of the zinc coating to the wire shall be such that when the wire is wrapped six turns round on a cylindrical mandrel having four times the diameter of the wire it does not flake or crack when rubbing it with the bare fingers.
All edges of the standard gabions including end panels and the diaphragms shall be mechanically selvedged in such a way as to prevent reveling of the mesh and to develop the full strength of the mesh. The wire used for the selvedge shall have a diameter equal to or greater than 3.4 mm. The zinc coating of these wires shall be in accordance with CYS EN 10244-2:2009.
Sufficient lacing and connecting wire shall be supplied with the gabions for all the wiring operations to be carried out in the construction of the gabions work. The quantity of such wire is estimated to be about 5 per cent approx. of the gabion weight supplied. The diameter of the lacing wire shall be 2.2 mm and the minimum mass of zinc coating shall be as given CYS EN 10244 – 2:2009.
Tolerances on diameter of zinc coated round wire shall be as given in table 2 of BS1052:1980.
Gabion busket / gabion boxes of the following size:4x2x0.5, the edges wire 6mm and the wire 4 mm used between the edges.
Gabion Boxes of following specifications for project in India: Wire Dia : 2.7mm + 1mm PVC coating MOC of Wire : Galvanised Total wire dia : 3.7mm Mesh Size : 80 to 100 Size of Box : 1M x 1M x 1M
Box Gabions Galfan & Green Plastic coated - Mesh Wire with Diaphragms and binding Wire Mesh Size: 80 x 100 mm Mesh Wire Galfan + PVC: 2.7/3.7 mm Selvedge Wire Galfan + PVC: 3.4/4.4 mm Ties Wire Galfan + PVC: 2.2 /3.2 mm Size (Thick. x Width x Length): 1m x 1m x 3m
Australia gabion box in grey color: Gabion box 2x1x1 Mesh size 8x10 cm Mesh wire 2.7/3.8m Selvedge wire 3.4/4 partition Gabion to conform to BS1052/1980 Hot dipped galv coating on fabric ferrous articals to AS/NZS 4680:2006
Description GABION boxes - 3 m wide x 0.3 m height with cover and lacing wire Quality conforming to BS443, BS 1052 GRADES GABION boxes - 1 m wide x 1 m height with cover and lacing wire Quality conforming to BS443, BS 1052 GRADES
Description GABION BOXES HEAVILY GALVANIZED + PVC COATED HEXAGONAL GABION BOXES MESH SIZE: 80 x 100 MM MESH WIRE GI + PVC: 2.7 / 3.7 MM SELVEDGE WIRE GI + PVC: 3.4 / 4.4 MM PARTITION: EVERY ONE METER COLOUR: GREY SIZE IN (M) : [LENGTH : 3M] x [WIDTH : 1M] x [HEIGHT : 1M] PARTITION : 2 SIZE IN (M) : [LENGTH : 3M] x [WIDTH : 1.5M] x [HEIGHT : 1M] PARTITION : 2 SIZE IN (M) : [LENGTH : 1.5M] x [WIDTH : 1M] x [HEIGHT : 1M] PARTITION : 0 SIZE IN (M) : [LENGTH : 1.5M] x [WIDTH : 1M] x [HEIGHT:0.5M] PARTITION : 0 LACING WIRE SIZE ( MM ) : 2.2 / 3.2 ( G.I + PVC ) ALL WIRES QUOTED ABOVE CONFORMS TO : 1: BS EN 10223 – 3 FOR HEXAGONAL STEEL WIRES FOR NETTING 2: BS EN 10244 – 2 CLASS A FOR ZINC COATING 3: BS 1052 FOR TENSILE STRENGTH
Dimension (L x W x H) = 2 x 1 x 0.5 (all units in Meter) Mesh Size : 80 x 100 mm Item Wire Type Diameter (mm)Weigh of Zinc that use for galvanized Wire After PVC Coated Gram / mm2 1 Wire (Structural)3.4 4.4≥ 270 2 Wire Mesh 2.7 3.7≥ 250 3 Tie wire 2.2 3.2≥ 240
Description 2.7mm Galvanised, and 4mm pvc coated hot dipped. Gabion Boxes Length Width Height Height 2.0 m 1,0 m 0.5m 1.0m 3.0 m 1.0m 0.5m 1.0m 4.0 m 1.0m 0.5m 1.0m Mattress 2m X 1m X .3m 3m X 1m X .3m 3m X 2m X .3m 4m X 1m X .3m 4m X 2m X .3m
Description Hot dipped galvanized box gabions, Double - Torsion wire mesh 8X10cm, wire diameter 3.00mm and wire selvedge diameter 3.90mm min, dimensions of the box: Base 1.00m X 2.00m., Height 0.50m. galvanization weight 260gr/m2 Hot dip galvanized wire of 2.50mm diameter packed in the roll of 25 Kgr each.
Description Gabions and plastic bags for Kabul Supply of Empty Box of Gabions for river embankment protection made of steel and consist of uniform mesh as under: 1. size 1 m x 1 m x 2 m (Tolerance of ±5% of length, width and height shall be permitted), 2. Weight 18 Kg , 3. Wire diameter for gabions (Selvedge wire) 4 mm ± 0.1 mm, 4. Internal wire (Mesh wire) diameter 3 mm ± 0.1 mm, 5. Lacing wire diameter 2.2 mm ± 0.1 mm 6. Size of net hole 120 x 100 mm ± Tolerance (10%) 6. Wire for fabrication and assembly shall be Galmac coated only and confirming to ASTM A856-97 With: HDPE ( High Density Polythene) / PP (Polypropylene) woven bags capacity to carry 50 Kg sand with details as under: 1. Width 50 cms (± 1 cm) 2. Height 120 cms (± 2 cm) 3. Weight Minimum 0.10 Kg/Bag
Description Conforming to the technical specification of Galfan Gabion Boxes & Mattresses
Box Gabions Galfan coated - Mesh Wire with Diaphragms and binding Wire Mesh Size: 60 x 80 mm Mesh Wire Galfan: 2.7 mm Selvedge Wire Galfan: 3.4 mm Ties Wire Galfan: 2.2 mm Size (Thick. x Width x Length): 0.5m x 1m x 3m
Box Gabions Galfan coated - Mesh Wire dia. 2.4 mm with Diaphragms and binding Wire dia. 2.2 mm Mesh Size: 60 x 80 mm Mesh Wire Galfan: 2.4 mm Selvedge Wire Galfan: 3.0 mm Ties Wire Galfan: 2.2 mm Size (Thick. x Width x Length): 1m x 1m x 2m
Box Gabions Galfan coated - Mesh Wire dia. 2.4 mm with Diaphragms and binding Wire dia. 2.2 mm Mesh Size: 60 x 80 mm Mesh Wire Galfan: 2.4 mm Selvedge Wire Galfan: 3.0 mm Ties Wire Galfan: 2.2 mm Size (Thick. x Width x Length): 0.5m x 1m x 2m
Additional Notes: 1. Gabion Boxes & Mattresses structure made of hexagonal double twisted wire mesh laced together. All steel wires used for manufacturing the Gabion Boxes & Mattresses are conforms to BS 1052 for tensile strength requirements. The zinc coating or Alu-zinc coating or wires conform to BS 443/EN 10244-2 requirement. 2. Tensile strength 350-500 N/mm2 3. Elongation not less than 10% 4. Galfan ZN 95 %-AL 5% According to BS 443/EN 10244-2 5. PVC coated wire conforming to various ASTM standards. 6. PVC Wire: Thickness not less than 0.5 mm. 7. Lacing operation: Submitted by the manufacturer. 8. Lasing tools: pilers, piler with nipper, nipper, crowbar, additional necessary tools submitted by the manufacturer. 9. Galfan durability curves should be submitted by the manufacturer. 10. Diaphragms to stitched every 1m distance to make one cubic meter box. Packing: Gabion boxes mattresses must be stowed and wrapped up so that it can be transported easily by forklift. Every bundle marked by a tied label( plate ) bearing box size, mesh size, length, width, height, and Etc.
Description Gabion Box, G.I, Size: 1M x 0.5M x 0.5M Specification: G.I. Wire mesh conform to BS443 for Zinc coating and BS1052. * Mesh Size: 80 x 100 * Mesh Wire: 2.4mm, Hot Dip G.I. Wire. * Slev. Wire: 2.7mm, Hot Dip G.I. Wire. * Lacing Wire: 2mm, Hot Dip G.I. Wire.. * Diaphragm at every 1M Centre.
Description Hex mesh gabions box Made of Galvanized Wire Gage 6 Net size 2" X 2" or 1,1/2" x1,1/2" High Gage Cloth Bag in black Sizes a Length 4 Feet Height 4 Feet Width 4 Feet b Length 3 Feet Height 4 Feet Width 2 Feet A Wall size (for road) Length 233 Feet Height 8 Feet Width 4 Feet B Wall size ( for road) Length 275 Feet Height 8 Feet Width 4 Feet
Gabions Protection project. Description #Size (m) 1 1.0 x 2.0 x 1.0 2 1.0 x 2.0 x 0.5 3 1.0 x 2.0 x 0.3 Gabions Box (hot dipped galv. wire ) 2x1x1 metre main wire: 2.7mm edge wire: 3.4mm Opening: 100X120
Description Supplied with Matress PVC COATED Geo Fabric patch 250 mm sqare glued to backs of walls to screen weepholes to Tanzania.
Description Hot dipped galvanized box gabions, Double - Torsion wire mesh 8X10cm, wire diameter 3.00mm and wire selvedge diameter 3.90mm min Dimensions of the box: Base 1.00m X 2.00m., Height 0.50m. Stitching galvanized wire of 2.50mm diameter Packed in the roll of 25 Kgr each.
Description Details about the gabions : Mesh wire 2.8mm thickness; Selvedge wire: 3.4mm; Mesh type: approximately 50x50mm All wires should be galvanized. The gabion box dimensions: Heigh x width x length: 0.3 x 3 x 4m 1 x 2 x 3m 1 x 1 x 3m 0.5 x 3 x 7m 1 x 1.5 x 2m 0.5 x 3 x 3m 1.5 x 3 x 3m Dimensions (surfaces): 3x4m 0.3x3m 0.3x4m 2x3m 2x1m 1x3m 1x1m 3x7m 0.5x3m 2x1.5m 1x1.5m
Description Material (mesh wire or welded if available 7.2cm x 7.2cm) Wire diameter 2.7mm or 3.00mm or 3.4mm Electro galvanized or hot dipped galvanized ( around 250g per square meter) PVC coated (with above wire diameters) Mesh opening 120mm x 150mm Size: 3m length x 1m width x 1m height, with 2 diaphragms Size: 2m length x 1m width x 1m height, with 1 diaphragm Size: 2m length x 0.50m width x 1m height, with 1 diaphragm
Description Size: 2M (L) x 1M (W) x 1M (H) Mesh Opening: 10cmx12cm Mesh wire: 2.70mm Salvedge wire: 3.40mm Tie Wire: 2.20mm (lacing wire) Heavy Galvanized Zinc coated Mattress Box Size: 6M (L) x 2M (W) x 3M (H) Mesh Opening: 10cm x12cm Mesh wire: 2.70mm
Description Mesh size 80x100mm Wire diameter 4mm Gabion size 2m x 1m x 1m, 3m x 1m x 1m, 4m x 1m x 1m, 2m x 1m x 0.5m, 4m x 1m x 0.5m. Material: Zinc coating metallic Gabion boxes: length 2 metres width 1 metre height 1 metre Mesh opening 120 x 150 mm, wire diameter 2.7 mm Length 2 metres width 0,50 metre height 1 metre Mesh opening 120 x 150 mm, wire diameter 2.7 mm
Description
Description Galfan&PVC coated gabion boxes Size(thick*width*lenght):1m*1m*2m mesh size :60*80mm dia wire:3mm Size(thick*width*lenght):1m*1m*3m Mesh size :80*100mm Dia wire:3mm Size(thick*width*lenght):0.5*1*3m Mesh size :60*80mm Dia wire:2.7mm Size(thick*width*lenght):0.5*1*2m mesh size :60*80 dia wire:3mm Size(thick*width*lenght):0.25*2*3m mesh size :60*80mm dia wire:2.2mm Cover gabion(2*3) mesh size:60*80mm dia wire:2.2mm Gabion (0.65*2), dia wire:3mm Target market: Arab gulf (Iraq/Jordan/Syria/uae)
Description Gabion box specifications: 1. Dimensions : 1 x 1 x 2 m. 2. Wire diameter : 3 ,4 mm. 3. Wire shape : hexagonal wire nettings 4. Wires opening 80 x 100 mm. Materials: Hot-dipped galvanized . Hot-dipped galvanized with PVC coated . Galvanized aluminum alloy ( galfan).
Description Gabion Box Double twisted Galvanised and PVC coated Mesh Size 100 x 120 mm; Mesh wire ID 2.77mm and OD 3.70mm; Selvedge wire ID 3.2mm and OD 4.2mm; Lacing wire ID 2.2mm and OD 3.2mm; Stiffener ID 2.2mm and OD 3.2mm; Box Size: 3M x 1M x 1M with two diaphragms Gabion Box Double twisted Galvanised Mesh Size 100 x 120 mm; Mesh wire 2.77mm Selvedge wire 3.2mm Lacing wire 2.2mm Stiffener 2.2mm Box Size: 3M x 1M x 1M with two diaphragms Metal Mesh Gabion Sheet Diaphragms Galvanised: Mesh Size 100 x 120 mm Size: 1M x 1M
Description Box size: 2*1*1 m 1.5*1*0.5 m 3*2*0.3 m Gabion box mesh 8*10 Wire 2.2 mm. 2.7 mm 3.4 mm
Description _Standard Dimensions of Gabions_ _(LXWXH) in meters_ _3 X 1 X 1_ _2 X 1 X 1_ _1,5 X 1 X 1_ _1 X 1 X 1_ _2 X 1 X 0,5_ _The standard type gabion made from flexible hot dip galvanized wire mesh of the type and size as specified below and detailed in the drawings._ The mesh shall be hexagonal woven mesh of the type 8 X 10 cm with the Joins formed by twisting each pair of wires through three half turns. The wire used in the fabrication of the gabions and in the wiring operation during, construction shall be in accordance with BS 1052:1980 “Mild steel wire” having an average tensile strength of 360-520 N/mm2. These values refer to the wire before fabrication of the netting. The diameter of the wire used in the fabrication of the netting shall not be less than 2.7 mm. All wires used in the fabrication of the gabions and in the wiring operation during construction shall be galvanized in accordance with CYS EN 10244 – 2:2009. The minimum zinc coating on wire 2.7 mm in diameter shall not be less than 245 gr/m2. In case the diameter of the wire used in the fabrication of the netting is greater than the value specified, then the thickness of the zinc coating shall be in accordance with CYS EN 10244-2:2009. _The adhesion of the zinc coating to the wire shall be such that when the wire is wrapped six turns round on a cylindrical mandrel having four times the diameter of the wire it does not flake or crack when rubbing it with the bare fingers. All edges of the standard gabions including end panels and the diaphragms shall be mechanically selvedged in such a way as to prevent reveling of the mesh and to develop the full strength of the mesh. The wire used for the selvedge shall have a diameter equal to or greater than 3.4 mm. the zinc coating of these wires shall be in accordance with CYS EN 10244-2:2009. Sufficient lacing and connecting wire shall be supplied with the gabions for all the wiring operations to be carried out in the construction of the gabions work. The quantity of such wire is estimated to be about 5 per cent approx. of the gabion weight supplied. The diameter of the lacing wire shall be 2.2 mm and the minimum mass of zinc coating shall be as given CYS EN 1024._ Tolerances on diameter of zinc coated round wire according to BS1052:1980.
Description GI Gabion Boxes 2x1x1 meters (LxWxH): GI wire to be used shall be hot-dipped heavy-coated soft or hard quality low carbon steel wire meeting the requirements given as follows: Nominal Diameter (mm): 3.25 Equivalent SWG: 10 Min. Zinc Coating (gm/m2): Hard: 250 Soft: 270 Zinc coating should be uniform and shall be able to withstand a minimum number of dips and adhesion test as per ISO. Details of Gabions mesh Size: Gabions Boxes (1x1x0.50) meters Mesh size (mm): 100x120 Type of Mesh: Hexagonal Selvedge wire-8 SWG mesh wire-10; binding wire -12 SWG Size: Gabions mattress depth (0.30 to 6.0) meters Mesh Size (mm): 100x120 Type of Mesh: Hexagonal Selvedge wire-8 SWG mesh wire-10; binding wire -12 SWG GI Gabion Boxes 1x1x0.50 meters (LxWxH): GI wire to be used shall be hot-dipped heavy-coated soft or hard quality low carbon steel wire meeting the requirements given as follows: Nominal Diameter (mm): 3.25 Equivalent SWG: 10 Min. Zinc Coating (gm/m2): Hard: 250 Soft: 270 Zinc coating should be uniform and shall be able to withstand a minimum number of dips and adhesion test as per ISO. Details of Gabions mesh Size: Gabions Boxes (3x1x0.50) meters Mesh size (mm): 100x120 Type of Mesh: Hexagonal Selvedge wire-8 SWG, mesh wire-10 Binding wire -12 SWG Size: Gabions mattress depth (0.30 to 6.0) meters Mesh Size (mm): 100x120 Type of Mesh: Hexagonal Selvedge wire-8 SWG, mesh wire-10 Binding wire -12 SWG
Description 2mx1mx1m Gabion Box, 2.7mm Galvanized Wire, 80x100 mesh size and 275g/m2 Zinc Coated with two compartments 3mx1mx300mm Gabion Mattress, 2.7mm Galvanized Wire, 80x100 mesh size and 275g/m2 Zinc Coated with three compartments
Description Gabion Boxes and Mattress and Geotextile Gabion box with the following dimension: 2×1×1, 8×10 2.7mm mesh wire, 2.2mm binding wire, 3.4mm side wire hot dip galvanized, zinc coating no less than 245g/m2 Supplied with 3x1x0.300 Mattress and Geo-textile
Description Details: Wire made high Ductile MS Wire with Heavy Class of Galvanization with an additional layer of Zinc + PVC Coating Mesh Type of 10 x12 as per EN 10223 & ASTM A975 Mesh Wire of 2.7mm (I.D)/3.7mm Weaving: Double Twisted by Mechanically Wrapping the Mesh wire round at least 2.5 Times, mechanical selvedged at the edges, lacing wire (Zinc + PVC Coated) of 2.2mm (I.D.)/3.2mm (O.D) with additional 5 % of the weight of Box for lacing wire supplied seperately Quality: Complying ASTM and European norm
Description Gabion Box measurement Opening 100 mm X 120 mm ( No partition ) ·1 x 1 x 2 m ·1 x 1 x 2 m ·1 x 1 x 3 m ·1 x 1 x 4 m ·1 x 1 x 5 m Gabion Mattress Brush, Opening 100mm X120mm) ·1 x 0.3 x 2 m ·1 x 0.5 x 3 m ·1 x 0.5 x 4 m ·1 x 0.5 x 5 m
Description Box Gabion Heavy Galvanized Wire 2.4mm & 2.7mm Mesh 8x10CM - 2 x 1 x 1.00M - 2 x 1 x 0.50M Mattress Heavy Galvanized Wire 2.2mm Mesh 6x8 cm - 6 x 2 x 0.30M - 3 x 2 x 0.30M - 2 x 1 x 0.30M
Description Extra 30 % more wire to tight up the gabion opening
Mesh Wire Diameter: 3.05 MM EDGE Diameter: 3.4MM Tolerance:+ - 0.08MM OPENING: 8cm * 10cm Dimension: 3M*1M * 1M Divider Size :1M * 1M Quality: Zinc coating >=260g/m2
Gabion Boxes for Revetment Infrastructure Project in Ghana of Africa Description GABION scope: Gabion boxes 1 m x 1 m, 2 m x 1 m . Gabion mattress, thickness 300mm Stone for rip-rap shall consist of well shaped hard dense durable rock. At least 50% of the pieces shall have a volume greater than 0.03 m 3 and not more than 5% shall have a volume of less than 0.01 m 3. The surfaces to receive rip-rap shall be neatly trimmed to line and level, and all loose material compacted. The perimeter of rip-rap areas shall be protected by means of rock filled trenches, walls or other structures as detailed on the Drawings, or directed by the Engineer. Rock fill for perimeter trenches shall be of the same quality and size as that used in the construction of the adjoining rip-rap, but voids shall be filled with smaller stone and the entire backfill compacted. A filter bed consisting of one or more layers of permeable material shall be placed on the prepared surface to the specified thickness. Care shall be taken not to mix the various grades of filter material, nor to disturb material already placed. If required, a filter fabric of an approved quality and grade shall be placed on the prepared surface or over the filter bed, as specified. The stones shall be laid with close joints from the bottom of the slope of embankment or existing ground upward, the larger of the stones being laid at the bottom. The surface shall be hand packed, carefully bedded and tightly wedged with suitable spalls to form an even surface. Alternatively the Engineer may direct that the stones arc dumped from above and that the rip-rap is roughly dressed to the dimensions shown on the Drawings or instructed by the Engineer. Gabions Gabions shall be galvanized steel-wire-mesh cages, of acknowledged and approved make, packed with rock and used for the construction of retaining walls, channel linings, revetments and other anti-erosion structures. They shall comply with the standard sizes given in Table below, and subdivided into cells by means of diaphragms. Standard Dimensions for Gabion Boxes and Mattresses Length (m)Width (m)Depth (m)Diaphragm Spacing (m)Maximum Mesh Size (mm) Boxes 1.0, 2.0, 3.0 and 4.0 1.0 0.3, 0.5 and 1.0 1.0 100 Mattresses 6.0 2.0 0.2, 0.3, and 0.5 0.6 or 1.0 as specified 80 The cut edges of all mesh used in the construction of gabions shall be selvedged. Wire used for gabions and for tying during construction shall be in accordance with BS 1052, shall have a tensile strength of at least 380 kN/m 2 and shall comply with Table 8.3. Galvanising shall be in accordance with BS EN 10244 and shall withstand 220 hours of exposure to salt spray test before failure by rusting. Wire mesh shall comply with BS EN 10223 and the maximum mesh size, measured across the twisted wire flats shall be as indicated in Table 8.3 Gabions of PVC coated mesh and binding wire shall be of an acknowledged make, subject to approval by the Engineer. Wire for Gabion Construction Diameter (mm)Galvanising (g/rn 2) Mesh Box 3.4 275 Mattress 2.7 260 Binder Box 2.2 240 Mattress 2.2 240 Selvedge Box 3.9 290 Mattress 3.4 275 Gabions shall be constructed to the shapes and dimensions indicated on the Drawings, Special Specification or as directed by the Engineer. The surface upon which gabions are to be laid shall be trimmed to line and level and compacted to a minimum dry density of 93% MDD (GHA SI). Where required, a foundation trench shall be excavated along the toe of the revetment or wall, to the dimensions indicated on the Drawings or specified. The assembly and installation of gabions shall be in accordance with the manufacturer's instructions, subject to the Engineer's approval. Joints shall be stitched together with 600 mm minimum lengths of binder wire, with at least one stitch per 50 mm, and each end of the wire shall be fixed with at least two turns upon itself. Adjacent gabions shall be stitched together with binder wire along all touching edges. Sufficient connecting wires shall be tensioned between the vertical sides of all the outer visible cells, to prevent the deformation of cages as they are filled with stone. The corners of gabion cages shall be securely tied together to provide a uniform surface, and ensure that the structure does not resemble a series of blocks or panels. Gabion boxes shall be laid with broken bond throughout to avoid continuous joints both horizontally and vertically. The alignment of the gabion wall structure shall be correct to within a tolerance of 100 mm of the specified alignment and the level of any course of gabion shall be correct to within a tolerance of 50 mm of the specified level. In addition adjacent gabions shall not vary by more than 25 mm in line and/or level from each other. Gabion structures, as constructed shall be within a tolerance of ± 5% on the specified height or width and ± 3% on the specified length. Gabions shall be handpacked with clean, hard, durable, unweathered boulders or broken rock of 150 mm minimum dimensions and 300 mm maximum dimension. The sides shall be packed first in the form of a wall, using the largest pieces, with the majority placed as headers with broken joints to present a neat outside
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.