EUR
en
Submersible Electric Pumps with Open Channel Impeller. Ideal for pumping and draining clear liquids & sewage. Available in 60Hz, 3-phase, 460V options. 2-pole or 4-pole options available.
Submersible Electric Pumps with Vortex Impeller. Solids Handling ideal for pumping residential sewage. 60Hz 1ph and 3ph options available.
Submersible Electric Pumps with Two Vane Impeller. Ideal for clear water or light sewage. 60Hz 1ph and 3ph options available.
Main components fabricated in cast iron GG25. Available in 60Hz, 460 V options. Built-in macerator in the inlet to break down solids. Seal Minder® Probe standard on all models.
Electric Grinder Pumps with Cutting System. Ideal for domestic sewage, liquids with suspended solids, or when high pressure is needed. 60Hz 1ph and 3ph options available.
Main components fabricated in cast iron GG25. Available in 60Hz, 460 V options. Double channel impellers.
The OverWatch® Single Pump Series (SP Series) is a direct in-line ejector pump system designed to match pumping performance in real-time with the inlet flow.
Main components fabricated in cast iron GG25. Available in 60Hz, 2-pole or 4-pole, 460 V options. Vortex impellers.
Customizable pump and control system for oil and water sensing. Integrated oil and water level sensing solution and customized automation controls. Self-cleaning, maintenance-free probes. Plug-and-play, multi-pin connector.
DERAGGERLite™ anti-ragging device will eradicate pump clogs in wastewater pumps. Reduces spills and polluting incidents. Minimal interruption to ‘live’ sites.
Patented system lifts effluent directly at point of entry. Patented impeller/shredder cuts fibrous materials and other solids. Variable Speed Drives for continuous modulated pumping directly from the effluent inlet to save energy.
Effortless Blockage Removal. Advanced Diagnostic Capabilities. Rapid Return on Investment. Environmental Impact Reduction. Seamless Integration. Real-time Monitoring.
Abrasion-resistant solids-handling pump. Heavy duty, high-chrome agitator for sand/ sludge/ slurry applications. Double silicon carbide mechanical seals.
Robust power analyzer and data logger combined. Can be installed into existing or new panels. Easy-to-use keypad has USB connectivity and convenient SD Card data storage.
Fahrenheit® HIGH TEMPERATURE, solids-handling, non-clog pump. Solids handling <3.5”. 304 stainless steel.
Modular interface for DERAGGER+ and supported accessories. Increases energy efficiency and reduces cost. Easily commissioned through color touch screen HMI.
Corrosion-resistant, 316 stainless steel solids handling wastewater pump. 316 stainless steel construction, FKM elastomers. Non-clogging vortex impeller.
CORROSION-RESISTANT, high head (140’) dewatering pump. Cast 316 stainless steel, no welds. Solids capability <3/8”.
Non-clog electrical submersible wastewater pump. Abrasive resistant, Hytrel-resin vortex impeller. Hardened steel agitator, die cast aluminum body.
12V battery-operated general dewatering pump. 1500 GPH / 25 GPM. Corrosion-resistant motor housing. Saltwater compatible.
Customized automation pump controls and level sensors. Manage an entire system of pumps and associated equipment. Graphical dashboards and numerical level indicators.
Float operated control panel with alarm for two pump automation. Single phase, 3-phase. Multi-function option available for 3 floats, 4 floats, or transducer. Coordinate multiple operations/limit fluctuations in water levels.
Abrasion-resistant, heavy-duty solids-handling pump. Designed, constructed for abrasive coal slurries. High chrome semi-open impeller and wear plate.
Cast iron effluent general sump dewatering pump. High flow <650 GPM. Solids capability up to 3/8”. 304 stainless steel motor housing.
HIGH HEAD (<140’) general sump dewatering pump. Cast iron construction. Solids capability up to 3/8”.
Fahrenheit® HIGH TEMPERATURE, high head, dewatering pump. Temperatures up to 200°F (93°C). High head up to 140’.
CORROSION RESISTANT, high flow (<650GPM) dewatering pump. Cast 316 stainless steel. Solids handling <3/8”.
Fahrenheit® HIGH TEMPERATURE, corrosion-resistant, dewatering pump. Cast 316 stainless steel. High temperature up to 200°F (93°C).
Fahrenheit® HIGH TEMPERATURE, CORROSION-RESISTANT, high head (140’) dewatering pump. Cast 316 stainless steel, no welds. Temperatures up to 200°F (93°C).
Heavy duty hard metal wastewater drainage pump with agitator. Wastewater removal in sand/slurry/sludge applications. Hard metal components.
Fahrenheit® HIGH TEMPERATURE wastewater slurry pump. Abrasive resistant chrome iron components. Narrow (<13.5” diameter).
HIGH FLOW (<1000 GMP), or HIGH HEAD (<400') abrasion-resistant, dewatering pump. High chrome iron impeller. Ductile iron wear plate and pump volute, hard metal components.
High capacity, hard metal slurry pump with agitator. High chrome iron agitator and iron ware parts. Semi-open impeller (<1” solids).
HYDRAULIC abrasion resistant, solids handling hard metal slurry pump. Hydraulic requirements: 8.2GPM – 25GPM. Semi-open impeller handles high concentration of abrasive solids.
Fahrenheit® HIGH TEMPERATURE. Heavy duty, abrasion-resistant solids-handling pump. Heavy duty high-chrome agitator for sand/ sludge/ slurry applications.
SEVERE abrasion-resistant solids-handling pump. Hardened ductile iron volute – 2x abrasion resistance. Semi-open impeller handles high concentration of abrasive solids.
Fahrenheit® HIGH TEMPERATURE, abrasion-resistant, solids-handling. Hard metal, agitator slurry pump. 2x abrasion resistance of standard ductile iron.
Lightweight hard metal agitator dewatering pump. Designed for dewatering sand, silt, coal fines and abrasive light slurries. Max solids:0.4” (sand, silt, coal fines and abrasive light slurries).
Heavy-duty non-clog wastewater pump. Non-clog, cast iron single channel impeller. Large 3" solid passage.
Heavy duty, dewatering pump with cast 356 T6 aluminum motor housing. Stainless steel handle and discharge connection. Wear-resistant, nitrile rubble/wear plates.
Small, low HP range dewatering pump. Robust cast iron construction. Top discharge, slim line design.
Portable, corrosion-resistant dewatering pump. Cast 316 stainless steel (ASTM 48), no welds. Motor cooling feature for low level liquid applications.
Shredding/cutting solids handling pump. Cast iron impeller with tungsten cutter edge. Ideal for wastewater treatment and ground.
Heavy-duty, non-clog solids handling wastewater pump. Cast iron pump with recess vortex impeller to pass 2‐inch solids.
Fahrenheit® HIGH TEMPERATURE. Solids-handling wastewater pump. 304 stainless steel motor housing.
Solids-handling non-clog pump. Shredding/cutting solids up to 3.5”. Cast iron and 304 stainless steel.
Patented dual-shredding RAD-AX® (cut/ /shear) technology solids handling pump. Prevents clogs <10% solids (by volume). Hardened 440C stainless steel cutting elements.
Fahrenheit® HIGH TEMPERATURE, shredding, solids handling pump. Radial + Axial patented RAD-AX® shredding technology designed to cut, shred, shear. Prevents clog in wastewater (<10% solids by volume).
CORROSION-RESISTANT 316 Stainless steel shredding/cutting solids handling pump. Designed to tear, break, rip solids. Max solids <3.5”.
Fahrenheit® HIGH TEMPERATURE, corrosion-resistant, non-clog, shredding/cutting pump. Wear-resistant shredding/ cutting system designed to tear, break, rip solids. Max solids 3.5”.
Low suction, cleanwater dewatering pump. Pumps down to 1/8”. Abrasive resistant, Hytrel-resin vortex impeller.
EXPLOSION-PROOF (MSHA) Heavy-duty, solids handling vortex trash pump. Designed to efficiently manage large solids (trash) while pumping liquids.
EXPLOSION-PROOF (MSHA) Heavy-duty, solids handling vortex trash pump. Designed to efficiently manage large solids (trash) while pumping liquids.
Heavy-duty, solids handling vortex trash pump. Designed to efficiently manage large solids (trash) while pumping liquids.
Heavy-duty, solids handling vortex trash pump. Designed to efficiently manage large solids (trash) while pumping liquids.
Economical general-purpose dewatering pump. Stainless outer casing w/ Abrasive resistant, Hytrel resin. Semi-open impeller.
Non-clog, solids handling pump with vortex impeller. Non-clog design for sewage, viscous liquids, rags, effluent water.
Fahrenheit® High Temperature, Solids Handling, recessed vortex impeller. Vortex impeller. Abrasion resistance w/ hardened ductile iron.
CORROSION-RESISTANT solids-handling non-clog pump. 316 stainless steel (ASTM 48). Max solids 2.5”.
Fahrenheit® HIGH TEMPERATURE, corrosion-resistant, solids-handling non-clog pump. High temps up to 200°F (93°C). Non-clog impellers, max solids 2.5”.
Packaged solution to address ASME 17.1 code requirements for traction (electric) elevators. Submersible pump, level sensor control panel and float package. Meets 50, 100 and 150 GMP at specified distance (feet).
EXPLOSION PROOF JX series. Corrosion-resistant, dewatering pump. Cast 316 stainless steel (ASTM 48) wet end, no welds.
EXPLOSION PROOF JHX series. Corrosion-resistant, high head (<112’) dewatering pump. Cast 316 stainless steel (ASTM 48) wet end, no welds.
EXPLOSION-PROOF KZN series. Abrasion-resistant solids-handling pump. Heavy duty high-chrome agitator (28%) for sand/ sludge/ slurry applications.
EXPLOSION-PROOF SKG series. Patented Dual-shredding RAD-AX® (Radial + Axial) technology dewatering pump. Prevents clogs in wastewater 10% solids.
EXPLOSION-PROOF SKX series. Corrosion-resistant, 316 stainless steel. Shredding/cutting - solids handling <3.5”.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.